import OCP.gp from typing import * from typing import Iterable as iterable from typing import Iterator as iterator from numpy import float64 _Shape = Tuple[int, ...] import OCP.TColStd import io __all__ = [ "NCollection_Lerp_gp_Trsf", "gp", "gp_Ax1", "gp_Ax2", "gp_Ax22d", "gp_Ax2d", "gp_Ax3", "gp_Circ", "gp_Circ2d", "gp_Cone", "gp_Cylinder", "gp_Dir", "gp_Dir2d", "gp_Elips", "gp_Elips2d", "gp_EulerSequence", "gp_GTrsf", "gp_GTrsf2d", "gp_Hypr", "gp_Hypr2d", "gp_Lin", "gp_Lin2d", "gp_Mat", "gp_Mat2d", "gp_Parab", "gp_Parab2d", "gp_Pln", "gp_Pnt", "gp_Pnt2d", "gp_Quaternion", "gp_QuaternionNLerp", "gp_QuaternionSLerp", "gp_Sphere", "gp_Torus", "gp_Trsf", "gp_Trsf2d", "gp_TrsfForm", "gp_Vec", "gp_Vec2d", "gp_Vec2f", "gp_Vec3f", "gp_VectorWithNullMagnitude", "gp_XY", "gp_XYZ", "__mul__", "__rmul__", "gp_Ax1Mirror", "gp_Ax2Mirror", "gp_CompoundTrsf", "gp_EulerAngles", "gp_Extrinsic_XYX", "gp_Extrinsic_XYZ", "gp_Extrinsic_XZX", "gp_Extrinsic_XZY", "gp_Extrinsic_YXY", "gp_Extrinsic_YXZ", "gp_Extrinsic_YZX", "gp_Extrinsic_YZY", "gp_Extrinsic_ZXY", "gp_Extrinsic_ZXZ", "gp_Extrinsic_ZYX", "gp_Extrinsic_ZYZ", "gp_Identity", "gp_Intrinsic_XYX", "gp_Intrinsic_XYZ", "gp_Intrinsic_XZX", "gp_Intrinsic_XZY", "gp_Intrinsic_YXY", "gp_Intrinsic_YXZ", "gp_Intrinsic_YZX", "gp_Intrinsic_YZY", "gp_Intrinsic_ZXY", "gp_Intrinsic_ZXZ", "gp_Intrinsic_ZYX", "gp_Intrinsic_ZYZ", "gp_Other", "gp_PntMirror", "gp_Rotation", "gp_Scale", "gp_Translation", "gp_YawPitchRoll" ] class NCollection_Lerp_gp_Trsf(): """ Linear interpolation tool for transformation defined by gp_Trsf. """ def Init(self,theStart : gp_Trsf,theEnd : gp_Trsf) -> None: """ Initialize values. """ def Interpolate(self,theT : float,theResult : gp_Trsf) -> None: """ Compute interpolated value between two values. """ @overload def __init__(self,theStart : gp_Trsf,theEnd : gp_Trsf) -> None: ... @overload def __init__(self) -> None: ... pass class gp(): """ The geometric processor package, called gp, provides an implementation of entities used : . for algebraic calculation such as "XYZ" coordinates, "Mat" matrix . for basis analytic geometry such as Transformations, point, vector, line, plane, axis placement, conics, and elementary surfaces. These entities are defined in 2d and 3d space. All the classes of this package are non-persistent. """ @staticmethod def DX2d_s() -> gp_Dir2d: """ Returns a unit vector with the combinations (1,0) """ @staticmethod def DX_s() -> gp_Dir: """ Returns a unit vector with the combination (1,0,0) """ @staticmethod def DY2d_s() -> gp_Dir2d: """ Returns a unit vector with the combinations (0,1) """ @staticmethod def DY_s() -> gp_Dir: """ Returns a unit vector with the combination (0,1,0) """ @staticmethod def DZ_s() -> gp_Dir: """ Returns a unit vector with the combination (0,0,1) """ @staticmethod def OX2d_s() -> gp_Ax2d: """ Identifies an axis where its origin is Origin2d and its unit vector coordinates are: X = 1.0, Y = 0.0 """ @staticmethod def OX_s() -> gp_Ax1: """ Identifies an axis where its origin is Origin and its unit vector coordinates X = 1.0, Y = Z = 0.0 """ @staticmethod def OY2d_s() -> gp_Ax2d: """ Identifies an axis where its origin is Origin2d and its unit vector coordinates are Y = 1.0, X = 0.0 """ @staticmethod def OY_s() -> gp_Ax1: """ Identifies an axis where its origin is Origin and its unit vector coordinates Y = 1.0, X = Z = 0.0 """ @staticmethod def OZ_s() -> gp_Ax1: """ Identifies an axis where its origin is Origin and its unit vector coordinates Z = 1.0, Y = X = 0.0 """ @staticmethod def Origin2d_s() -> gp_Pnt2d: """ Identifies a Cartesian point with coordinates X = Y = 0.0 """ @staticmethod def Origin_s() -> gp_Pnt: """ Identifies a Cartesian point with coordinates X = Y = Z = 0.0.0 """ @staticmethod def Resolution_s() -> float: """ Method of package gp """ @staticmethod def XOY_s() -> gp_Ax2: """ Identifies a coordinate system where its origin is Origin, and its "main Direction" and "X Direction" coordinates Z = 1.0, X = Y =0.0 and X direction coordinates X = 1.0, Y = Z = 0.0 """ @staticmethod def YOZ_s() -> gp_Ax2: """ Identifies a coordinate system where its origin is Origin, and its "main Direction" and "X Direction" coordinates X = 1.0, Z = Y =0.0 and X direction coordinates Y = 1.0, X = Z = 0.0 In 2D space """ @staticmethod def ZOX_s() -> gp_Ax2: """ Identifies a coordinate system where its origin is Origin, and its "main Direction" and "X Direction" coordinates Y = 1.0, X = Z =0.0 and X direction coordinates Z = 1.0, X = Y = 0.0 """ def __init__(self) -> None: ... pass class gp_Ax1(): """ Describes an axis in 3D space. An axis is defined by: - its origin (also referred to as its "Location point"), and - its unit vector (referred to as its "Direction" or "main Direction"). An axis is used: - to describe 3D geometric entities (for example, the axis of a revolution entity). It serves the same purpose as the STEP function "axis placement one axis", or - to define geometric transformations (axis of symmetry, axis of rotation, and so on). For example, this entity can be used to locate a geometric entity or to define a symmetry axis. """ def Angle(self,theOther : gp_Ax1) -> float: """ Computes the angular value, in radians, between this.Direction() and theOther.Direction(). Returns the angle between 0 and 2*PI radians. """ def Direction(self) -> gp_Dir: """ Returns the direction of . """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def InitFromJson(self,theSStream : Any,theStreamPos : int) -> bool: """ Inits the content of me from the stream """ def IsCoaxial(self,Other : gp_Ax1,AngularTolerance : float,LinearTolerance : float) -> bool: """ Returns True if : . the angle between and is lower or equal to and . the distance between .Location() and is lower or equal to and . the distance between .Location() and is lower or equal to LinearTolerance. """ def IsNormal(self,theOther : gp_Ax1,theAngularTolerance : float) -> bool: """ Returns True if the direction of this and another axis are normal to each other. That is, if the angle between the two axes is equal to Pi/2. Note: the tolerance criterion is given by theAngularTolerance. """ def IsOpposite(self,theOther : gp_Ax1,theAngularTolerance : float) -> bool: """ Returns True if the direction of this and another axis are parallel with opposite orientation. That is, if the angle between the two axes is equal to Pi. Note: the tolerance criterion is given by theAngularTolerance. """ def IsParallel(self,theOther : gp_Ax1,theAngularTolerance : float) -> bool: """ Returns True if the direction of this and another axis are parallel with same orientation or opposite orientation. That is, if the angle between the two axes is equal to 0 or Pi. Note: the tolerance criterion is given by theAngularTolerance. """ def Location(self) -> gp_Pnt: """ Returns the location point of . """ @overload def Mirror(self,A2 : gp_Ax2) -> None: """ Performs the symmetrical transformation of an axis placement with respect to the point P which is the center of the symmetry and assigns the result to this axis. Performs the symmetrical transformation of an axis placement with respect to an axis placement which is the axis of the symmetry and assigns the result to this axis. Performs the symmetrical transformation of an axis placement with respect to a plane. The axis placement locates the plane of the symmetry : (Location, XDirection, YDirection) and assigns the result to this axis. """ @overload def Mirror(self,P : gp_Pnt) -> None: ... @overload def Mirror(self,A1 : gp_Ax1) -> None: ... @overload def Mirrored(self,P : gp_Pnt) -> gp_Ax1: """ Performs the symmetrical transformation of an axis placement with respect to the point P which is the center of the symmetry and creates a new axis. Performs the symmetrical transformation of an axis placement with respect to an axis placement which is the axis of the symmetry and creates a new axis. Performs the symmetrical transformation of an axis placement with respect to a plane. The axis placement locates the plane of the symmetry : (Location, XDirection, YDirection) and creates a new axis. """ @overload def Mirrored(self,A1 : gp_Ax1) -> gp_Ax1: ... @overload def Mirrored(self,A2 : gp_Ax2) -> gp_Ax1: ... def Reverse(self) -> None: """ Reverses the unit vector of this axis and assigns the result to this axis. """ def Reversed(self) -> gp_Ax1: """ Reverses the unit vector of this axis and creates a new one. """ def Rotate(self,theA1 : gp_Ax1,theAngRad : float) -> None: """ Rotates this axis at an angle theAngRad (in radians) about the axis theA1 and assigns the result to this axis. """ def Rotated(self,theA1 : gp_Ax1,theAngRad : float) -> gp_Ax1: """ Rotates this axis at an angle theAngRad (in radians) about the axis theA1 and creates a new one. """ def Scale(self,theP : gp_Pnt,theS : float) -> None: """ Applies a scaling transformation to this axis with: - scale factor theS, and - center theP and assigns the result to this axis. """ def Scaled(self,theP : gp_Pnt,theS : float) -> gp_Ax1: """ Applies a scaling transformation to this axis with: - scale factor theS, and - center theP and creates a new axis. """ def SetDirection(self,theV : gp_Dir) -> None: """ Assigns V as the "Direction" of this axis. """ def SetLocation(self,theP : gp_Pnt) -> None: """ Assigns P as the origin of this axis. """ def Transform(self,theT : gp_Trsf) -> None: """ Applies the transformation theT to this axis and assigns the result to this axis. """ def Transformed(self,theT : gp_Trsf) -> gp_Ax1: """ Applies the transformation theT to this axis and creates a new one. """ @overload def Translate(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> None: """ Translates this axis by the vector theV, and assigns the result to this axis. Translates this axis by: the vector (theP1, theP2) defined from point theP1 to point theP2. and assigns the result to this axis. """ @overload def Translate(self,theV : gp_Vec) -> None: ... @overload def Translated(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> gp_Ax1: """ Translates this axis by the vector theV, and creates a new one. Translates this axis by: the vector (theP1, theP2) defined from point theP1 to point theP2. and creates a new one. """ @overload def Translated(self,theV : gp_Vec) -> gp_Ax1: ... @overload def __init__(self,theP : gp_Pnt,theV : gp_Dir) -> None: ... @overload def __init__(self) -> None: ... pass class gp_Ax2(): """ Describes a right-handed coordinate system in 3D space. A coordinate system is defined by: - its origin (also referred to as its "Location point"), and - three orthogonal unit vectors, termed respectively the "X Direction", the "Y Direction" and the "Direction" (also referred to as the "main Direction"). The "Direction" of the coordinate system is called its "main Direction" because whenever this unit vector is modified, the "X Direction" and the "Y Direction" are recomputed. However, when we modify either the "X Direction" or the "Y Direction", "Direction" is not modified. The "main Direction" is also the "Z Direction". Since an Ax2 coordinate system is right-handed, its "main Direction" is always equal to the cross product of its "X Direction" and "Y Direction". (To define a left-handed coordinate system, use gp_Ax3.) A coordinate system is used: - to describe geometric entities, in particular to position them. The local coordinate system of a geometric entity serves the same purpose as the STEP function "axis placement two axes", or - to define geometric transformations. Note: we refer to the "X Axis", "Y Axis" and "Z Axis", respectively, as to axes having: - the origin of the coordinate system as their origin, and - the unit vectors "X Direction", "Y Direction" and "main Direction", respectively, as their unit vectors. The "Z Axis" is also the "main Axis". """ def Angle(self,theOther : gp_Ax2) -> float: """ Computes the angular value, in radians, between the main direction of and the main direction of . Returns the angle between 0 and PI in radians. """ def Axis(self) -> gp_Ax1: """ Returns the main axis of . It is the "Location" point and the main "Direction". """ def Direction(self) -> gp_Dir: """ Returns the main direction of . """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def InitFromJson(self,theSStream : Any,theStreamPos : int) -> bool: """ Inits the content of me from the stream """ @overload def IsCoplanar(self,theA : gp_Ax1,theLinearTolerance : float,theAngularTolerance : float) -> bool: """ None Returns True if . the distance between and the "Location" point of A1 is lower of equal to LinearTolerance and . the main direction of and the direction of A1 are normal. Note: the tolerance criterion for angular equality is given by AngularTolerance. None Returns True if . the distance between and the "Location" point of A1 is lower of equal to LinearTolerance and . the main direction of and the direction of A1 are normal. Note: the tolerance criterion for angular equality is given by AngularTolerance. """ @overload def IsCoplanar(self,theOther : gp_Ax2,theLinearTolerance : float,theAngularTolerance : float) -> bool: ... @overload def IsCoplanar(self,A1 : gp_Ax1,LinearTolerance : float,AngularTolerance : float) -> bool: ... @overload def IsCoplanar(self,Other : gp_Ax2,LinearTolerance : float,AngularTolerance : float) -> bool: ... def Location(self) -> gp_Pnt: """ Returns the "Location" point (origin) of . """ @overload def Mirror(self,A2 : gp_Ax2) -> None: """ Performs a symmetrical transformation of this coordinate system with respect to: - the point P, and assigns the result to this coordinate system. Warning This transformation is always performed on the origin. In case of a reflection with respect to a point: - the main direction of the coordinate system is not changed, and - the "X Direction" and the "Y Direction" are simply reversed In case of a reflection with respect to an axis or a plane: - the transformation is applied to the "X Direction" and the "Y Direction", then - the "main Direction" is recomputed as the cross product "X Direction" ^ "Y Direction". This maintains the right-handed property of the coordinate system. Performs a symmetrical transformation of this coordinate system with respect to: - the axis A1, and assigns the result to this coordinate systeme. Warning This transformation is always performed on the origin. In case of a reflection with respect to a point: - the main direction of the coordinate system is not changed, and - the "X Direction" and the "Y Direction" are simply reversed In case of a reflection with respect to an axis or a plane: - the transformation is applied to the "X Direction" and the "Y Direction", then - the "main Direction" is recomputed as the cross product "X Direction" ^ "Y Direction". This maintains the right-handed property of the coordinate system. Performs a symmetrical transformation of this coordinate system with respect to: - the plane defined by the origin, "X Direction" and "Y Direction" of coordinate system A2 and assigns the result to this coordinate systeme. Warning This transformation is always performed on the origin. In case of a reflection with respect to a point: - the main direction of the coordinate system is not changed, and - the "X Direction" and the "Y Direction" are simply reversed In case of a reflection with respect to an axis or a plane: - the transformation is applied to the "X Direction" and the "Y Direction", then - the "main Direction" is recomputed as the cross product "X Direction" ^ "Y Direction". This maintains the right-handed property of the coordinate system. """ @overload def Mirror(self,P : gp_Pnt) -> None: ... @overload def Mirror(self,A1 : gp_Ax1) -> None: ... @overload def Mirrored(self,A2 : gp_Ax2) -> gp_Ax2: """ Performs a symmetrical transformation of this coordinate system with respect to: - the point P, and creates a new one. Warning This transformation is always performed on the origin. In case of a reflection with respect to a point: - the main direction of the coordinate system is not changed, and - the "X Direction" and the "Y Direction" are simply reversed In case of a reflection with respect to an axis or a plane: - the transformation is applied to the "X Direction" and the "Y Direction", then - the "main Direction" is recomputed as the cross product "X Direction" ^ "Y Direction". This maintains the right-handed property of the coordinate system. Performs a symmetrical transformation of this coordinate system with respect to: - the axis A1, and creates a new one. Warning This transformation is always performed on the origin. In case of a reflection with respect to a point: - the main direction of the coordinate system is not changed, and - the "X Direction" and the "Y Direction" are simply reversed In case of a reflection with respect to an axis or a plane: - the transformation is applied to the "X Direction" and the "Y Direction", then - the "main Direction" is recomputed as the cross product "X Direction" ^ "Y Direction". This maintains the right-handed property of the coordinate system. Performs a symmetrical transformation of this coordinate system with respect to: - the plane defined by the origin, "X Direction" and "Y Direction" of coordinate system A2 and creates a new one. Warning This transformation is always performed on the origin. In case of a reflection with respect to a point: - the main direction of the coordinate system is not changed, and - the "X Direction" and the "Y Direction" are simply reversed In case of a reflection with respect to an axis or a plane: - the transformation is applied to the "X Direction" and the "Y Direction", then - the "main Direction" is recomputed as the cross product "X Direction" ^ "Y Direction". This maintains the right-handed property of the coordinate system. """ @overload def Mirrored(self,P : gp_Pnt) -> gp_Ax2: ... @overload def Mirrored(self,A1 : gp_Ax1) -> gp_Ax2: ... def Rotate(self,theA1 : gp_Ax1,theAng : float) -> None: """ None """ def Rotated(self,theA1 : gp_Ax1,theAng : float) -> gp_Ax2: """ Rotates an axis placement. is the axis of the rotation. theAng is the angular value of the rotation in radians. """ def Scale(self,theP : gp_Pnt,theS : float) -> None: """ None """ def Scaled(self,theP : gp_Pnt,theS : float) -> gp_Ax2: """ Applies a scaling transformation on the axis placement. The "Location" point of the axisplacement is modified. Warnings : If the scale is negative : . the main direction of the axis placement is not changed. . The "XDirection" and the "YDirection" are reversed. So the axis placement stay right handed. """ @overload def SetAxis(self,A1 : gp_Ax1) -> None: """ Assigns the origin and "main Direction" of the axis A1 to this coordinate system, then recomputes its "X Direction" and "Y Direction". Note: The new "X Direction" is computed as follows: new "X Direction" = V1 ^(previous "X Direction" ^ V) where V is the "Direction" of A1. Exceptions Standard_ConstructionError if A1 is parallel to the "X Direction" of this coordinate system. Assigns the origin and "main Direction" of the axis A1 to this coordinate system, then recomputes its "X Direction" and "Y Direction". Note: The new "X Direction" is computed as follows: new "X Direction" = V1 ^(previous "X Direction" ^ V) where V is the "Direction" of A1. Exceptions Standard_ConstructionError if A1 is parallel to the "X Direction" of this coordinate system. """ @overload def SetAxis(self,theA1 : gp_Ax1) -> None: ... @overload def SetDirection(self,V : gp_Dir) -> None: """ Changes the "main Direction" of this coordinate system, then recomputes its "X Direction" and "Y Direction". Note: the new "X Direction" is computed as follows: new "X Direction" = V ^ (previous "X Direction" ^ V) Exceptions Standard_ConstructionError if V is parallel to the "X Direction" of this coordinate system. Changes the "main Direction" of this coordinate system, then recomputes its "X Direction" and "Y Direction". Note: the new "X Direction" is computed as follows: new "X Direction" = V ^ (previous "X Direction" ^ V) Exceptions Standard_ConstructionError if V is parallel to the "X Direction" of this coordinate system. """ @overload def SetDirection(self,theV : gp_Dir) -> None: ... def SetLocation(self,theP : gp_Pnt) -> None: """ Changes the "Location" point (origin) of . """ def SetXDirection(self,theVx : gp_Dir) -> None: """ Changes the "Xdirection" of . The main direction "Direction" is not modified, the "Ydirection" is modified. If is not normal to the main direction then is computed as follows XDirection = Direction ^ (Vx ^ Direction). Exceptions Standard_ConstructionError if Vx or Vy is parallel to the "main Direction" of this coordinate system. """ def SetYDirection(self,theVy : gp_Dir) -> None: """ Changes the "Ydirection" of . The main direction is not modified but the "Xdirection" is changed. If is not normal to the main direction then "YDirection" is computed as follows YDirection = Direction ^ ( ^ Direction). Exceptions Standard_ConstructionError if Vx or Vy is parallel to the "main Direction" of this coordinate system. """ def Transform(self,theT : gp_Trsf) -> None: """ None """ def Transformed(self,theT : gp_Trsf) -> gp_Ax2: """ Transforms an axis placement with a Trsf. The "Location" point, the "XDirection" and the "YDirection" are transformed with theT. The resulting main "Direction" of is the cross product between the "XDirection" and the "YDirection" after transformation. """ @overload def Translate(self,theV : gp_Vec) -> None: """ None None """ @overload def Translate(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> None: ... @overload def Translated(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> gp_Ax2: """ Translates an axis plaxement in the direction of the vector . The magnitude of the translation is the vector's magnitude. Translates an axis placement from the point to the point . """ @overload def Translated(self,theV : gp_Vec) -> gp_Ax2: ... def XDirection(self) -> gp_Dir: """ Returns the "XDirection" of . """ def YDirection(self) -> gp_Dir: """ Returns the "YDirection" of . """ @overload def __init__(self,P : gp_Pnt,V : gp_Dir) -> None: ... @overload def __init__(self) -> None: ... @overload def __init__(self,P : gp_Pnt,N : gp_Dir,Vx : gp_Dir) -> None: ... pass class gp_Ax22d(): """ Describes a coordinate system in a plane (2D space). A coordinate system is defined by: - its origin (also referred to as its "Location point"), and - two orthogonal unit vectors, respectively, called the "X Direction" and the "Y Direction". A gp_Ax22d may be right-handed ("direct sense") or left-handed ("inverse" or "indirect sense"). You use a gp_Ax22d to: - describe 2D geometric entities, in particular to position them. The local coordinate system of a geometric entity serves for the same purpose as the STEP function "axis placement two axes", or - define geometric transformations. Note: we refer to the "X Axis" and "Y Axis" as the axes having: - the origin of the coordinate system as their origin, and - the unit vectors "X Direction" and "Y Direction", respectively, as their unit vectors. """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def Location(self) -> gp_Pnt2d: """ Returns the "Location" point (origin) of . """ @overload def Mirror(self,theP : gp_Pnt2d) -> None: """ None None """ @overload def Mirror(self,theA : gp_Ax2d) -> None: ... @overload def Mirrored(self,theP : gp_Pnt2d) -> gp_Ax22d: """ Performs the symmetrical transformation of an axis placement with respect to the point theP which is the center of the symmetry. Warnings : The main direction of the axis placement is not changed. The "XDirection" and the "YDirection" are reversed. So the axis placement stay right handed. Performs the symmetrical transformation of an axis placement with respect to an axis placement which is the axis of the symmetry. The transformation is performed on the "Location" point, on the "XDirection" and "YDirection". The resulting main "Direction" is the cross product between the "XDirection" and the "YDirection" after transformation. """ @overload def Mirrored(self,theA : gp_Ax2d) -> gp_Ax22d: ... def Rotate(self,theP : gp_Pnt2d,theAng : float) -> None: """ None None """ def Rotated(self,theP : gp_Pnt2d,theAng : float) -> gp_Ax22d: """ Rotates an axis placement. is the axis of the rotation . theAng is the angular value of the rotation in radians. """ def Scale(self,theP : gp_Pnt2d,theS : float) -> None: """ None None """ def Scaled(self,theP : gp_Pnt2d,theS : float) -> gp_Ax22d: """ Applies a scaling transformation on the axis placement. The "Location" point of the axisplacement is modified. Warnings : If the scale is negative : . the main direction of the axis placement is not changed. . The "XDirection" and the "YDirection" are reversed. So the axis placement stay right handed. """ def SetAxis(self,theA1 : gp_Ax22d) -> None: """ Assigns the origin and the two unit vectors of the coordinate system theA1 to this coordinate system. """ def SetLocation(self,theP : gp_Pnt2d) -> None: """ Changes the "Location" point (origin) of . """ def SetXAxis(self,theA1 : gp_Ax2d) -> None: """ Changes the XAxis and YAxis ("Location" point and "Direction") of . The "YDirection" is recomputed in the same sense as before. Changes the XAxis and YAxis ("Location" point and "Direction") of . The "YDirection" is recomputed in the same sense as before. """ def SetXDirection(self,theVx : gp_Dir2d) -> None: """ Assigns theVx to the "X Direction" of this coordinate system. The other unit vector of this coordinate system is recomputed, normal to theVx , without modifying the orientation (right-handed or left-handed) of this coordinate system. Assigns theVx to the "X Direction" of this coordinate system. The other unit vector of this coordinate system is recomputed, normal to theVx , without modifying the orientation (right-handed or left-handed) of this coordinate system. """ def SetYAxis(self,theA1 : gp_Ax2d) -> None: """ Changes the XAxis and YAxis ("Location" point and "Direction") of . The "XDirection" is recomputed in the same sense as before. Changes the XAxis and YAxis ("Location" point and "Direction") of . The "XDirection" is recomputed in the same sense as before. """ def SetYDirection(self,theVy : gp_Dir2d) -> None: """ Assignsr theVy to the "Y Direction" of this coordinate system. The other unit vector of this coordinate system is recomputed, normal to theVy, without modifying the orientation (right-handed or left-handed) of this coordinate system. Assignsr theVy to the "Y Direction" of this coordinate system. The other unit vector of this coordinate system is recomputed, normal to theVy, without modifying the orientation (right-handed or left-handed) of this coordinate system. """ def Transform(self,theT : gp_Trsf2d) -> None: """ None None """ def Transformed(self,theT : gp_Trsf2d) -> gp_Ax22d: """ Transforms an axis placement with a Trsf. The "Location" point, the "XDirection" and the "YDirection" are transformed with theT. The resulting main "Direction" of is the cross product between the "XDirection" and the "YDirection" after transformation. """ @overload def Translate(self,theV : gp_Vec2d) -> None: """ None None """ @overload def Translate(self,theP1 : gp_Pnt2d,theP2 : gp_Pnt2d) -> None: ... @overload def Translated(self,theP1 : gp_Pnt2d,theP2 : gp_Pnt2d) -> gp_Ax22d: """ Translates an axis plaxement in the direction of the vector . The magnitude of the translation is the vector's magnitude. Translates an axis placement from the point to the point . """ @overload def Translated(self,theV : gp_Vec2d) -> gp_Ax22d: ... def XAxis(self) -> gp_Ax2d: """ Returns an axis, for which - the origin is that of this coordinate system, and - the unit vector is either the "X Direction" of this coordinate system. Note: the result is the "X Axis" of this coordinate system. """ def XDirection(self) -> gp_Dir2d: """ Returns the "XDirection" of . """ def YAxis(self) -> gp_Ax2d: """ Returns an axis, for which - the origin is that of this coordinate system, and - the unit vector is either the "Y Direction" of this coordinate system. Note: the result is the "Y Axis" of this coordinate system. """ def YDirection(self) -> gp_Dir2d: """ Returns the "YDirection" of . """ @overload def __init__(self,theP : gp_Pnt2d,theV : gp_Dir2d,theIsSense : bool=True) -> None: ... @overload def __init__(self) -> None: ... @overload def __init__(self,theP : gp_Pnt2d,theVx : gp_Dir2d,theVy : gp_Dir2d) -> None: ... @overload def __init__(self,theA : gp_Ax2d,theIsSense : bool=True) -> None: ... pass class gp_Ax2d(): """ Describes an axis in the plane (2D space). An axis is defined by: - its origin (also referred to as its "Location point"), and - its unit vector (referred to as its "Direction"). An axis implicitly defines a direct, right-handed coordinate system in 2D space by: - its origin, - its "Direction" (giving the "X Direction" of the coordinate system), and - the unit vector normal to "Direction" (positive angle measured in the trigonometric sense). An axis is used: - to describe 2D geometric entities (for example, the axis which defines angular coordinates on a circle). It serves for the same purpose as the STEP function "axis placement one axis", or - to define geometric transformations (axis of symmetry, axis of rotation, and so on). Note: to define a left-handed 2D coordinate system, use gp_Ax22d. """ def Angle(self,theOther : gp_Ax2d) -> float: """ Computes the angle, in radians, between this axis and the axis theOther. The value of the angle is between -Pi and Pi. """ def Direction(self) -> gp_Dir2d: """ Returns the direction of . """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def IsCoaxial(self,Other : gp_Ax2d,AngularTolerance : float,LinearTolerance : float) -> bool: """ Returns True if : . the angle between and is lower or equal to and . the distance between .Location() and is lower or equal to and . the distance between .Location() and is lower or equal to LinearTolerance. """ def IsNormal(self,theOther : gp_Ax2d,theAngularTolerance : float) -> bool: """ Returns true if this axis and the axis theOther are normal to each other. That is, if the angle between the two axes is equal to Pi/2 or -Pi/2. Note: the tolerance criterion is given by theAngularTolerance. """ def IsOpposite(self,theOther : gp_Ax2d,theAngularTolerance : float) -> bool: """ Returns true if this axis and the axis theOther are parallel, and have opposite orientations. That is, if the angle between the two axes is equal to Pi or -Pi. Note: the tolerance criterion is given by theAngularTolerance. """ def IsParallel(self,theOther : gp_Ax2d,theAngularTolerance : float) -> bool: """ Returns true if this axis and the axis theOther are parallel, and have either the same or opposite orientations. That is, if the angle between the two axes is equal to 0, Pi or -Pi. Note: the tolerance criterion is given by theAngularTolerance. """ def Location(self) -> gp_Pnt2d: """ Returns the origin of . """ @overload def Mirror(self,P : gp_Pnt2d) -> None: """ None None """ @overload def Mirror(self,A : gp_Ax2d) -> None: ... @overload def Mirrored(self,P : gp_Pnt2d) -> gp_Ax2d: """ Performs the symmetrical transformation of an axis placement with respect to the point P which is the center of the symmetry. Performs the symmetrical transformation of an axis placement with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirrored(self,A : gp_Ax2d) -> gp_Ax2d: ... def Reverse(self) -> None: """ Reverses the direction of and assigns the result to this axis. """ def Reversed(self) -> gp_Ax2d: """ Computes a new axis placement with a direction opposite to the direction of . """ def Rotate(self,theP : gp_Pnt2d,theAng : float) -> None: """ None """ def Rotated(self,theP : gp_Pnt2d,theAng : float) -> gp_Ax2d: """ Rotates an axis placement. is the center of the rotation. theAng is the angular value of the rotation in radians. """ def Scale(self,P : gp_Pnt2d,S : float) -> None: """ None """ def Scaled(self,theP : gp_Pnt2d,theS : float) -> gp_Ax2d: """ Applies a scaling transformation on the axis placement. The "Location" point of the axisplacement is modified. The "Direction" is reversed if the scale is negative. """ def SetDirection(self,theV : gp_Dir2d) -> None: """ Changes the direction of . """ def SetLocation(self,theP : gp_Pnt2d) -> None: """ Changes the "Location" point (origin) of . """ def Transform(self,theT : gp_Trsf2d) -> None: """ None """ def Transformed(self,theT : gp_Trsf2d) -> gp_Ax2d: """ Transforms an axis placement with a Trsf. """ @overload def Translate(self,theP1 : gp_Pnt2d,theP2 : gp_Pnt2d) -> None: """ None None """ @overload def Translate(self,theV : gp_Vec2d) -> None: ... @overload def Translated(self,theV : gp_Vec2d) -> gp_Ax2d: """ Translates an axis placement in the direction of the vector theV. The magnitude of the translation is the vector's magnitude. Translates an axis placement from the point theP1 to the point theP2. """ @overload def Translated(self,theP1 : gp_Pnt2d,theP2 : gp_Pnt2d) -> gp_Ax2d: ... @overload def __init__(self,theP : gp_Pnt2d,theV : gp_Dir2d) -> None: ... @overload def __init__(self) -> None: ... pass class gp_Ax3(): """ Describes a coordinate system in 3D space. Unlike a gp_Ax2 coordinate system, a gp_Ax3 can be right-handed ("direct sense") or left-handed ("indirect sense"). A coordinate system is defined by: - its origin (also referred to as its "Location point"), and - three orthogonal unit vectors, termed the "X Direction", the "Y Direction" and the "Direction" (also referred to as the "main Direction"). The "Direction" of the coordinate system is called its "main Direction" because whenever this unit vector is modified, the "X Direction" and the "Y Direction" are recomputed. However, when we modify either the "X Direction" or the "Y Direction", "Direction" is not modified. "Direction" is also the "Z Direction". The "main Direction" is always parallel to the cross product of its "X Direction" and "Y Direction". If the coordinate system is right-handed, it satisfies the equation: "main Direction" = "X Direction" ^ "Y Direction" and if it is left-handed, it satisfies the equation: "main Direction" = -"X Direction" ^ "Y Direction" A coordinate system is used: - to describe geometric entities, in particular to position them. The local coordinate system of a geometric entity serves the same purpose as the STEP function "axis placement three axes", or - to define geometric transformations. Note: - We refer to the "X Axis", "Y Axis" and "Z Axis", respectively, as the axes having: - the origin of the coordinate system as their origin, and - the unit vectors "X Direction", "Y Direction" and "main Direction", respectively, as their unit vectors. - The "Z Axis" is also the "main Axis". - gp_Ax2 is used to define a coordinate system that must be always right-handed. """ def Angle(self,theOther : gp_Ax3) -> float: """ Computes the angular value between the main direction of and the main direction of . Returns the angle between 0 and PI in radians. """ def Ax2(self) -> gp_Ax2: """ Computes a right-handed coordinate system with the same "X Direction" and "Y Direction" as those of this coordinate system, then recomputes the "main Direction". If this coordinate system is right-handed, the result returned is the same coordinate system. If this coordinate system is left-handed, the result is reversed. Computes a right-handed coordinate system with the same "X Direction" and "Y Direction" as those of this coordinate system, then recomputes the "main Direction". If this coordinate system is right-handed, the result returned is the same coordinate system. If this coordinate system is left-handed, the result is reversed. """ def Axis(self) -> gp_Ax1: """ Returns the main axis of . It is the "Location" point and the main "Direction". """ def Direct(self) -> bool: """ Returns True if the coordinate system is right-handed. i.e. XDirection().Crossed(YDirection()).Dot(Direction()) > 0 """ def Direction(self) -> gp_Dir: """ Returns the main direction of . """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def InitFromJson(self,theSStream : Any,theStreamPos : int) -> bool: """ Inits the content of me from the stream """ @overload def IsCoplanar(self,theOther : gp_Ax3,theLinearTolerance : float,theAngularTolerance : float) -> bool: """ Returns True if . the distance between the "Location" point of and is lower or equal to theLinearTolerance and . the distance between the "Location" point of and is lower or equal to theLinearTolerance and . the main direction of and the main direction of are parallel (same or opposite orientation). Returns True if . the distance between and the "Location" point of theA1 is lower of equal to theLinearTolerance and . the distance between theA1 and the "Location" point of is lower or equal to theLinearTolerance and . the main direction of and the direction of theA1 are normal. Returns True if . the distance between the "Location" point of and is lower or equal to theLinearTolerance and . the distance between the "Location" point of and is lower or equal to theLinearTolerance and . the main direction of and the main direction of are parallel (same or opposite orientation). Returns True if . the distance between and the "Location" point of theA1 is lower of equal to theLinearTolerance and . the distance between theA1 and the "Location" point of is lower or equal to theLinearTolerance and . the main direction of and the direction of theA1 are normal. """ @overload def IsCoplanar(self,theA1 : gp_Ax1,theLinearTolerance : float,theAngularTolerance : float) -> bool: ... def Location(self) -> gp_Pnt: """ Returns the "Location" point (origin) of . """ @overload def Mirror(self,theA2 : gp_Ax2) -> None: """ None None None """ @overload def Mirror(self,theA1 : gp_Ax1) -> None: ... @overload def Mirror(self,theP : gp_Pnt) -> None: ... @overload def Mirrored(self,theA2 : gp_Ax2) -> gp_Ax3: """ Performs the symmetrical transformation of an axis placement with respect to the point theP which is the center of the symmetry. Warnings : The main direction of the axis placement is not changed. The "XDirection" and the "YDirection" are reversed. So the axis placement stay right handed. Performs the symmetrical transformation of an axis placement with respect to an axis placement which is the axis of the symmetry. The transformation is performed on the "Location" point, on the "XDirection" and "YDirection". The resulting main "Direction" is the cross product between the "XDirection" and the "YDirection" after transformation. Performs the symmetrical transformation of an axis placement with respect to a plane. The axis placement locates the plane of the symmetry : (Location, XDirection, YDirection). The transformation is performed on the "Location" point, on the "XDirection" and "YDirection". The resulting main "Direction" is the cross product between the "XDirection" and the "YDirection" after transformation. """ @overload def Mirrored(self,theP : gp_Pnt) -> gp_Ax3: ... @overload def Mirrored(self,theA1 : gp_Ax1) -> gp_Ax3: ... def Rotate(self,theA1 : gp_Ax1,theAng : float) -> None: """ None """ def Rotated(self,theA1 : gp_Ax1,theAng : float) -> gp_Ax3: """ Rotates an axis placement. is the axis of the rotation . theAng is the angular value of the rotation in radians. """ def Scale(self,theP : gp_Pnt,theS : float) -> None: """ None """ def Scaled(self,theP : gp_Pnt,theS : float) -> gp_Ax3: """ Applies a scaling transformation on the axis placement. The "Location" point of the axisplacement is modified. Warnings : If the scale is negative : . the main direction of the axis placement is not changed. . The "XDirection" and the "YDirection" are reversed. So the axis placement stay right handed. """ def SetAxis(self,theA1 : gp_Ax1) -> None: """ Assigns the origin and "main Direction" of the axis theA1 to this coordinate system, then recomputes its "X Direction" and "Y Direction". Note: - The new "X Direction" is computed as follows: new "X Direction" = V1 ^(previous "X Direction" ^ V) where V is the "Direction" of theA1. - The orientation of this coordinate system (right-handed or left-handed) is not modified. Raises ConstructionError if the "Direction" of and the "XDirection" of are parallel (same or opposite orientation) because it is impossible to calculate the new "XDirection" and the new "YDirection". Assigns the origin and "main Direction" of the axis theA1 to this coordinate system, then recomputes its "X Direction" and "Y Direction". Note: - The new "X Direction" is computed as follows: new "X Direction" = V1 ^(previous "X Direction" ^ V) where V is the "Direction" of theA1. - The orientation of this coordinate system (right-handed or left-handed) is not modified. Raises ConstructionError if the "Direction" of and the "XDirection" of are parallel (same or opposite orientation) because it is impossible to calculate the new "XDirection" and the new "YDirection". """ def SetDirection(self,theV : gp_Dir) -> None: """ Changes the main direction of this coordinate system, then recomputes its "X Direction" and "Y Direction". Note: - The new "X Direction" is computed as follows: new "X Direction" = theV ^ (previous "X Direction" ^ theV). - The orientation of this coordinate system (left- or right-handed) is not modified. Raises ConstructionError if and the previous "XDirection" are parallel because it is impossible to calculate the new "XDirection" and the new "YDirection". Changes the main direction of this coordinate system, then recomputes its "X Direction" and "Y Direction". Note: - The new "X Direction" is computed as follows: new "X Direction" = theV ^ (previous "X Direction" ^ theV). - The orientation of this coordinate system (left- or right-handed) is not modified. Raises ConstructionError if and the previous "XDirection" are parallel because it is impossible to calculate the new "XDirection" and the new "YDirection". """ def SetLocation(self,theP : gp_Pnt) -> None: """ Changes the "Location" point (origin) of . """ def SetXDirection(self,theVx : gp_Dir) -> None: """ Changes the "Xdirection" of . The main direction "Direction" is not modified, the "Ydirection" is modified. If is not normal to the main direction then is computed as follows XDirection = Direction ^ (theVx ^ Direction). Raises ConstructionError if is parallel (same or opposite orientation) to the main direction of Changes the "Xdirection" of . The main direction "Direction" is not modified, the "Ydirection" is modified. If is not normal to the main direction then is computed as follows XDirection = Direction ^ (theVx ^ Direction). Raises ConstructionError if is parallel (same or opposite orientation) to the main direction of """ def SetYDirection(self,theVy : gp_Dir) -> None: """ Changes the "Ydirection" of . The main direction is not modified but the "Xdirection" is changed. If is not normal to the main direction then "YDirection" is computed as follows YDirection = Direction ^ ( ^ Direction). Raises ConstructionError if is parallel to the main direction of Changes the "Ydirection" of . The main direction is not modified but the "Xdirection" is changed. If is not normal to the main direction then "YDirection" is computed as follows YDirection = Direction ^ ( ^ Direction). Raises ConstructionError if is parallel to the main direction of """ def Transform(self,theT : gp_Trsf) -> None: """ None """ def Transformed(self,theT : gp_Trsf) -> gp_Ax3: """ Transforms an axis placement with a Trsf. The "Location" point, the "XDirection" and the "YDirection" are transformed with theT. The resulting main "Direction" of is the cross product between the "XDirection" and the "YDirection" after transformation. """ @overload def Translate(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> None: """ None None """ @overload def Translate(self,theV : gp_Vec) -> None: ... @overload def Translated(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> gp_Ax3: """ Translates an axis plaxement in the direction of the vector . The magnitude of the translation is the vector's magnitude. Translates an axis placement from the point to the point . """ @overload def Translated(self,theV : gp_Vec) -> gp_Ax3: ... def XDirection(self) -> gp_Dir: """ Returns the "XDirection" of . """ def XReverse(self) -> None: """ Reverses the X direction of . """ def YDirection(self) -> gp_Dir: """ Returns the "YDirection" of . """ def YReverse(self) -> None: """ Reverses the Y direction of . """ def ZReverse(self) -> None: """ Reverses the Z direction of . """ @overload def __init__(self,theP : gp_Pnt,theN : gp_Dir,theVx : gp_Dir) -> None: ... @overload def __init__(self,theP : gp_Pnt,theV : gp_Dir) -> None: ... @overload def __init__(self) -> None: ... @overload def __init__(self,theA : gp_Ax2) -> None: ... pass class gp_Circ(): """ Describes a circle in 3D space. A circle is defined by its radius and positioned in space with a coordinate system (a gp_Ax2 object) as follows: - the origin of the coordinate system is the center of the circle, and - the origin, "X Direction" and "Y Direction" of the coordinate system define the plane of the circle. This positioning coordinate system is the "local coordinate system" of the circle. Its "main Direction" gives the normal vector to the plane of the circle. The "main Axis" of the coordinate system is referred to as the "Axis" of the circle. Note: when a gp_Circ circle is converted into a Geom_Circle circle, some implicit properties of the circle are used explicitly: - the "main Direction" of the local coordinate system gives an implicit orientation to the circle (and defines its trigonometric sense), - this orientation corresponds to the direction in which parameter values increase, - the starting point for parameterization is that of the "X Axis" of the local coordinate system (i.e. the "X Axis" of the circle). See Also gce_MakeCirc which provides functions for more complex circle constructions Geom_Circle which provides additional functions for constructing circles and works, in particular, with the parametric equations of circles """ def Area(self) -> float: """ Computes the area of the circle. """ def Axis(self) -> gp_Ax1: """ Returns the main axis of the circle. It is the axis perpendicular to the plane of the circle, passing through the "Location" point (center) of the circle. """ def Contains(self,theP : gp_Pnt,theLinearTolerance : float) -> bool: """ Returns True if the point theP is on the circumference. The distance between and must be lower or equal to theLinearTolerance. """ def Distance(self,theP : gp_Pnt) -> float: """ Computes the minimum of distance between the point theP and any point on the circumference of the circle. """ def Length(self) -> float: """ Computes the circumference of the circle. """ def Location(self) -> gp_Pnt: """ Returns the center of the circle. It is the "Location" point of the local coordinate system of the circle """ @overload def Mirror(self,theA2 : gp_Ax2) -> None: """ None None None """ @overload def Mirror(self,theA1 : gp_Ax1) -> None: ... @overload def Mirror(self,theP : gp_Pnt) -> None: ... @overload def Mirrored(self,theA2 : gp_Ax2) -> gp_Circ: """ Performs the symmetrical transformation of a circle with respect to the point theP which is the center of the symmetry. Performs the symmetrical transformation of a circle with respect to an axis placement which is the axis of the symmetry. Performs the symmetrical transformation of a circle with respect to a plane. The axis placement theA2 locates the plane of the of the symmetry : (Location, XDirection, YDirection). """ @overload def Mirrored(self,theA1 : gp_Ax1) -> gp_Circ: ... @overload def Mirrored(self,theP : gp_Pnt) -> gp_Circ: ... def Position(self) -> gp_Ax2: """ Returns the position of the circle. It is the local coordinate system of the circle. """ def Radius(self) -> float: """ Returns the radius of this circle. """ def Rotate(self,theA1 : gp_Ax1,theAng : float) -> None: """ None """ def Rotated(self,theA1 : gp_Ax1,theAng : float) -> gp_Circ: """ Rotates a circle. theA1 is the axis of the rotation. theAng is the angular value of the rotation in radians. """ def Scale(self,theP : gp_Pnt,theS : float) -> None: """ None None """ def Scaled(self,theP : gp_Pnt,theS : float) -> gp_Circ: """ Scales a circle. theS is the scaling value. Warnings : If theS is negative the radius stay positive but the "XAxis" and the "YAxis" are reversed as for an ellipse. Scales a circle. theS is the scaling value. Warnings : If theS is negative the radius stay positive but the "XAxis" and the "YAxis" are reversed as for an ellipse. """ def SetAxis(self,theA1 : gp_Ax1) -> None: """ Changes the main axis of the circle. It is the axis perpendicular to the plane of the circle. Raises ConstructionError if the direction of theA1 is parallel to the "XAxis" of the circle. """ def SetLocation(self,theP : gp_Pnt) -> None: """ Changes the "Location" point (center) of the circle. """ def SetPosition(self,theA2 : gp_Ax2) -> None: """ Changes the position of the circle. """ def SetRadius(self,theRadius : float) -> None: """ Modifies the radius of this circle. Warning. This class does not prevent the creation of a circle where theRadius is null. Exceptions Standard_ConstructionError if theRadius is negative. """ def SquareDistance(self,theP : gp_Pnt) -> float: """ Computes the square distance between and the point theP. """ def Transform(self,theT : gp_Trsf) -> None: """ None None """ def Transformed(self,theT : gp_Trsf) -> gp_Circ: """ Transforms a circle with the transformation theT from class Trsf. Transforms a circle with the transformation theT from class Trsf. """ @overload def Translate(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> None: """ None None """ @overload def Translate(self,theV : gp_Vec) -> None: ... @overload def Translated(self,theV : gp_Vec) -> gp_Circ: """ Translates a circle in the direction of the vector theV. The magnitude of the translation is the vector's magnitude. Translates a circle from the point theP1 to the point theP2. """ @overload def Translated(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> gp_Circ: ... def XAxis(self) -> gp_Ax1: """ Returns the "XAxis" of the circle. This axis is perpendicular to the axis of the conic. This axis and the "Yaxis" define the plane of the conic. """ def YAxis(self) -> gp_Ax1: """ Returns the "YAxis" of the circle. This axis and the "Xaxis" define the plane of the conic. The "YAxis" is perpendicular to the "Xaxis". """ @overload def __init__(self,theA2 : gp_Ax2,theRadius : float) -> None: ... @overload def __init__(self) -> None: ... pass class gp_Circ2d(): """ Describes a circle in the plane (2D space). A circle is defined by its radius and positioned in the plane with a coordinate system (a gp_Ax22d object) as follows: - the origin of the coordinate system is the center of the circle, and - the orientation (direct or indirect) of the coordinate system gives an implicit orientation to the circle (and defines its trigonometric sense). This positioning coordinate system is the "local coordinate system" of the circle. Note: when a gp_Circ2d circle is converted into a Geom2d_Circle circle, some implicit properties of the circle are used explicitly: - the implicit orientation corresponds to the direction in which parameter values increase, - the starting point for parameterization is that of the "X Axis" of the local coordinate system (i.e. the "X Axis" of the circle). See Also GccAna and Geom2dGcc packages which provide functions for constructing circles defined by geometric constraints gce_MakeCirc2d which provides functions for more complex circle constructions Geom2d_Circle which provides additional functions for constructing circles and works, with the parametric equations of circles in particular gp_Ax22d """ def Area(self) -> float: """ Computes the area of the circle. """ def Axis(self) -> gp_Ax22d: """ returns the position of the circle. """ def Coefficients(self) -> tuple[float, float, float, float, float, float]: """ Returns the normalized coefficients from the implicit equation of the circle : theA * (X**2) + theB * (Y**2) + 2*theC*(X*Y) + 2*theD*X + 2*theE*Y + theF = 0.0 Returns the normalized coefficients from the implicit equation of the circle : theA * (X**2) + theB * (Y**2) + 2*theC*(X*Y) + 2*theD*X + 2*theE*Y + theF = 0.0 """ def Contains(self,theP : gp_Pnt2d,theLinearTolerance : float) -> bool: """ Does contain theP ? Returns True if the distance between theP and any point on the circumference of the circle is lower of equal to . """ def Distance(self,theP : gp_Pnt2d) -> float: """ Computes the minimum of distance between the point theP and any point on the circumference of the circle. Computes the minimum of distance between the point theP and any point on the circumference of the circle. """ def IsDirect(self) -> bool: """ Returns true if the local coordinate system is direct and false in the other case. """ def Length(self) -> float: """ computes the circumference of the circle. """ def Location(self) -> gp_Pnt2d: """ Returns the location point (center) of the circle. """ @overload def Mirror(self,theP : gp_Pnt2d) -> None: """ None None """ @overload def Mirror(self,theA : gp_Ax2d) -> None: ... @overload def Mirrored(self,theP : gp_Pnt2d) -> gp_Circ2d: """ Performs the symmetrical transformation of a circle with respect to the point theP which is the center of the symmetry Performs the symmetrical transformation of a circle with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirrored(self,theA : gp_Ax2d) -> gp_Circ2d: ... def Position(self) -> gp_Ax22d: """ returns the position of the circle. Idem Axis(me). """ def Radius(self) -> float: """ Returns the radius value of the circle. """ def Reverse(self) -> None: """ Reverses the orientation of the local coordinate system of this circle (the "Y Direction" is reversed) and therefore changes the implicit orientation of this circle. Reverse assigns the result to this circle, """ def Reversed(self) -> gp_Circ2d: """ Reverses the orientation of the local coordinate system of this circle (the "Y Direction" is reversed) and therefore changes the implicit orientation of this circle. Reversed creates a new circle. Reverses the orientation of the local coordinate system of this circle (the "Y Direction" is reversed) and therefore changes the implicit orientation of this circle. Reversed creates a new circle. """ def Rotate(self,theP : gp_Pnt2d,theAng : float) -> None: """ None """ def Rotated(self,theP : gp_Pnt2d,theAng : float) -> gp_Circ2d: """ Rotates a circle. theP is the center of the rotation. Ang is the angular value of the rotation in radians. """ def Scale(self,theP : gp_Pnt2d,theS : float) -> None: """ None None """ def Scaled(self,theP : gp_Pnt2d,theS : float) -> gp_Circ2d: """ Scales a circle. theS is the scaling value. Warnings : If theS is negative the radius stay positive but the "XAxis" and the "YAxis" are reversed as for an ellipse. Scales a circle. theS is the scaling value. Warnings : If theS is negative the radius stay positive but the "XAxis" and the "YAxis" are reversed as for an ellipse. """ def SetAxis(self,theA : gp_Ax22d) -> None: """ Changes the X axis of the circle. """ def SetLocation(self,theP : gp_Pnt2d) -> None: """ Changes the location point (center) of the circle. """ def SetRadius(self,theRadius : float) -> None: """ Modifies the radius of this circle. This class does not prevent the creation of a circle where theRadius is null. Exceptions Standard_ConstructionError if theRadius is negative. """ def SetXAxis(self,theA : gp_Ax2d) -> None: """ Changes the X axis of the circle. """ def SetYAxis(self,theA : gp_Ax2d) -> None: """ Changes the Y axis of the circle. """ def SquareDistance(self,theP : gp_Pnt2d) -> float: """ Computes the square distance between and the point theP. Computes the square distance between and the point theP. """ def Transform(self,theT : gp_Trsf2d) -> None: """ None None """ def Transformed(self,theT : gp_Trsf2d) -> gp_Circ2d: """ Transforms a circle with the transformation theT from class Trsf2d. Transforms a circle with the transformation theT from class Trsf2d. """ @overload def Translate(self,theV : gp_Vec2d) -> None: """ None None """ @overload def Translate(self,theP1 : gp_Pnt2d,theP2 : gp_Pnt2d) -> None: ... @overload def Translated(self,theV : gp_Vec2d) -> gp_Circ2d: """ Translates a circle in the direction of the vector theV. The magnitude of the translation is the vector's magnitude. Translates a circle from the point theP1 to the point theP2. """ @overload def Translated(self,theP1 : gp_Pnt2d,theP2 : gp_Pnt2d) -> gp_Circ2d: ... def XAxis(self) -> gp_Ax2d: """ returns the X axis of the circle. """ def YAxis(self) -> gp_Ax2d: """ Returns the Y axis of the circle. Reverses the direction of the circle. """ @overload def __init__(self) -> None: ... @overload def __init__(self,theAxis : gp_Ax22d,theRadius : float) -> None: ... @overload def __init__(self,theXAxis : gp_Ax2d,theRadius : float,theIsSense : bool=True) -> None: ... pass class gp_Cone(): """ Defines an infinite conical surface. A cone is defined by its half-angle (can be negative) at the apex and positioned in space with a coordinate system (a gp_Ax3 object) and a "reference radius" where: - the "main Axis" of the coordinate system is the axis of revolution of the cone, - the plane defined by the origin, the "X Direction" and the "Y Direction" of the coordinate system is the reference plane of the cone; the intersection of the cone with this reference plane is a circle of radius equal to the reference radius, if the half-angle is positive, the apex of the cone is on the negative side of the "main Axis" of the coordinate system. If the half-angle is negative, the apex is on the positive side. This coordinate system is the "local coordinate system" of the cone. Note: when a gp_Cone cone is converted into a Geom_ConicalSurface cone, some implicit properties of its local coordinate system are used explicitly: - its origin, "X Direction", "Y Direction" and "main Direction" are used directly to define the parametric directions on the cone and the origin of the parameters, - its implicit orientation (right-handed or left-handed) gives the orientation (direct or indirect) of the Geom_ConicalSurface cone. See Also gce_MakeCone which provides functions for more complex cone constructions Geom_ConicalSurface which provides additional functions for constructing cones and works, in particular, with the parametric equations of cones gp_Ax3 """ def Apex(self) -> gp_Pnt: """ Computes the cone's top. The Apex of the cone is on the negative side of the symmetry axis of the cone. """ def Axis(self) -> gp_Ax1: """ returns the symmetry axis of the cone. """ def Coefficients(self) -> tuple[float, float, float, float, float, float, float, float, float, float]: """ Computes the coefficients of the implicit equation of the quadric in the absolute cartesian coordinates system : theA1.X**2 + theA2.Y**2 + theA3.Z**2 + 2.(theB1.X.Y + theB2.X.Z + theB3.Y.Z) + 2.(theC1.X + theC2.Y + theC3.Z) + theD = 0.0 """ def Direct(self) -> bool: """ Returns true if the local coordinate system of this cone is right-handed. """ def Location(self) -> gp_Pnt: """ returns the "Location" point of the cone. """ @overload def Mirror(self,theP : gp_Pnt) -> None: """ None None None """ @overload def Mirror(self,theA1 : gp_Ax1) -> None: ... @overload def Mirror(self,theA2 : gp_Ax2) -> None: ... @overload def Mirrored(self,theP : gp_Pnt) -> gp_Cone: """ Performs the symmetrical transformation of a cone with respect to the point theP which is the center of the symmetry. Performs the symmetrical transformation of a cone with respect to an axis placement which is the axis of the symmetry. Performs the symmetrical transformation of a cone with respect to a plane. The axis placement theA2 locates the plane of the of the symmetry : (Location, XDirection, YDirection). """ @overload def Mirrored(self,theA2 : gp_Ax2) -> gp_Cone: ... @overload def Mirrored(self,theA1 : gp_Ax1) -> gp_Cone: ... def Position(self) -> gp_Ax3: """ Returns the local coordinates system of the cone. """ def RefRadius(self) -> float: """ Returns the radius of the cone in the reference plane. """ def Rotate(self,theA1 : gp_Ax1,theAng : float) -> None: """ None """ def Rotated(self,theA1 : gp_Ax1,theAng : float) -> gp_Cone: """ Rotates a cone. theA1 is the axis of the rotation. Ang is the angular value of the rotation in radians. """ def Scale(self,theP : gp_Pnt,theS : float) -> None: """ None None """ def Scaled(self,theP : gp_Pnt,theS : float) -> gp_Cone: """ Scales a cone. theS is the scaling value. The absolute value of theS is used to scale the cone Scales a cone. theS is the scaling value. The absolute value of theS is used to scale the cone """ def SemiAngle(self) -> float: """ Returns the half-angle at the apex of this cone. Attention! Semi-angle can be negative. """ def SetAxis(self,theA1 : gp_Ax1) -> None: """ Changes the symmetry axis of the cone. Raises ConstructionError the direction of theA1 is parallel to the "XDirection" of the coordinate system of the cone. """ def SetLocation(self,theLoc : gp_Pnt) -> None: """ Changes the location of the cone. """ def SetPosition(self,theA3 : gp_Ax3) -> None: """ Changes the local coordinate system of the cone. This coordinate system defines the reference plane of the cone. """ def SetRadius(self,theR : float) -> None: """ Changes the radius of the cone in the reference plane of the cone. Raised if theR < 0.0 """ def SetSemiAngle(self,theAng : float) -> None: """ Changes the semi-angle of the cone. Semi-angle can be negative. Its absolute value Abs(theAng) is in range ]0,PI/2[. Raises ConstructionError if Abs(theAng) < Resolution from gp or Abs(theAng) >= PI/2 - Resolution Changes the semi-angle of the cone. Semi-angle can be negative. Its absolute value Abs(theAng) is in range ]0,PI/2[. Raises ConstructionError if Abs(theAng) < Resolution from gp or Abs(theAng) >= PI/2 - Resolution """ def Transform(self,theT : gp_Trsf) -> None: """ None None """ def Transformed(self,theT : gp_Trsf) -> gp_Cone: """ Transforms a cone with the transformation theT from class Trsf. Transforms a cone with the transformation theT from class Trsf. """ @overload def Translate(self,theV : gp_Vec) -> None: """ None None """ @overload def Translate(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> None: ... @overload def Translated(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> gp_Cone: """ Translates a cone in the direction of the vector theV. The magnitude of the translation is the vector's magnitude. Translates a cone from the point P1 to the point P2. """ @overload def Translated(self,theV : gp_Vec) -> gp_Cone: ... def UReverse(self) -> None: """ Reverses the U parametrization of the cone reversing the YAxis. """ def VReverse(self) -> None: """ Reverses the V parametrization of the cone reversing the ZAxis. """ def XAxis(self) -> gp_Ax1: """ Returns the XAxis of the reference plane. """ def YAxis(self) -> gp_Ax1: """ Returns the YAxis of the reference plane. """ @overload def __init__(self,theA3 : gp_Ax3,theAng : float,theRadius : float) -> None: ... @overload def __init__(self) -> None: ... pass class gp_Cylinder(): """ Describes an infinite cylindrical surface. A cylinder is defined by its radius and positioned in space with a coordinate system (a gp_Ax3 object), the "main Axis" of which is the axis of the cylinder. This coordinate system is the "local coordinate system" of the cylinder. Note: when a gp_Cylinder cylinder is converted into a Geom_CylindricalSurface cylinder, some implicit properties of its local coordinate system are used explicitly: - its origin, "X Direction", "Y Direction" and "main Direction" are used directly to define the parametric directions on the cylinder and the origin of the parameters, - its implicit orientation (right-handed or left-handed) gives an orientation (direct or indirect) to the Geom_CylindricalSurface cylinder. See Also gce_MakeCylinder which provides functions for more complex cylinder constructions Geom_CylindricalSurface which provides additional functions for constructing cylinders and works, in particular, with the parametric equations of cylinders gp_Ax3 """ def Axis(self) -> gp_Ax1: """ Returns the symmetry axis of the cylinder. """ def Coefficients(self) -> tuple[float, float, float, float, float, float, float, float, float, float]: """ Computes the coefficients of the implicit equation of the quadric in the absolute cartesian coordinate system : theA1.X**2 + theA2.Y**2 + theA3.Z**2 + 2.(theB1.X.Y + theB2.X.Z + theB3.Y.Z) + 2.(theC1.X + theC2.Y + theC3.Z) + theD = 0.0 """ def Direct(self) -> bool: """ Returns true if the local coordinate system of this cylinder is right-handed. """ def Location(self) -> gp_Pnt: """ Returns the "Location" point of the cylinder. """ @overload def Mirror(self,theA2 : gp_Ax2) -> None: """ None None None """ @overload def Mirror(self,theP : gp_Pnt) -> None: ... @overload def Mirror(self,theA1 : gp_Ax1) -> None: ... @overload def Mirrored(self,theP : gp_Pnt) -> gp_Cylinder: """ Performs the symmetrical transformation of a cylinder with respect to the point theP which is the center of the symmetry. Performs the symmetrical transformation of a cylinder with respect to an axis placement which is the axis of the symmetry. Performs the symmetrical transformation of a cylinder with respect to a plane. The axis placement theA2 locates the plane of the of the symmetry : (Location, XDirection, YDirection). """ @overload def Mirrored(self,theA1 : gp_Ax1) -> gp_Cylinder: ... @overload def Mirrored(self,theA2 : gp_Ax2) -> gp_Cylinder: ... def Position(self) -> gp_Ax3: """ Returns the local coordinate system of the cylinder. """ def Radius(self) -> float: """ Returns the radius of the cylinder. """ def Rotate(self,theA1 : gp_Ax1,theAng : float) -> None: """ None """ def Rotated(self,theA1 : gp_Ax1,theAng : float) -> gp_Cylinder: """ Rotates a cylinder. theA1 is the axis of the rotation. theAng is the angular value of the rotation in radians. """ def Scale(self,theP : gp_Pnt,theS : float) -> None: """ None None """ def Scaled(self,theP : gp_Pnt,theS : float) -> gp_Cylinder: """ Scales a cylinder. theS is the scaling value. The absolute value of theS is used to scale the cylinder Scales a cylinder. theS is the scaling value. The absolute value of theS is used to scale the cylinder """ def SetAxis(self,theA1 : gp_Ax1) -> None: """ Changes the symmetry axis of the cylinder. Raises ConstructionError if the direction of theA1 is parallel to the "XDirection" of the coordinate system of the cylinder. """ def SetLocation(self,theLoc : gp_Pnt) -> None: """ Changes the location of the surface. """ def SetPosition(self,theA3 : gp_Ax3) -> None: """ Change the local coordinate system of the surface. """ def SetRadius(self,theR : float) -> None: """ Modifies the radius of this cylinder. Exceptions Standard_ConstructionError if theR is negative. """ def Transform(self,theT : gp_Trsf) -> None: """ None None """ def Transformed(self,theT : gp_Trsf) -> gp_Cylinder: """ Transforms a cylinder with the transformation theT from class Trsf. Transforms a cylinder with the transformation theT from class Trsf. """ @overload def Translate(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> None: """ None None """ @overload def Translate(self,theV : gp_Vec) -> None: ... @overload def Translated(self,theV : gp_Vec) -> gp_Cylinder: """ Translates a cylinder in the direction of the vector theV. The magnitude of the translation is the vector's magnitude. Translates a cylinder from the point theP1 to the point theP2. """ @overload def Translated(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> gp_Cylinder: ... def UReverse(self) -> None: """ Reverses the U parametrization of the cylinder reversing the YAxis. """ def VReverse(self) -> None: """ Reverses the V parametrization of the plane reversing the Axis. """ def XAxis(self) -> gp_Ax1: """ Returns the axis X of the cylinder. """ def YAxis(self) -> gp_Ax1: """ Returns the axis Y of the cylinder. """ @overload def __init__(self,theA3 : gp_Ax3,theRadius : float) -> None: ... @overload def __init__(self) -> None: ... pass class gp_Dir(): """ Describes a unit vector in 3D space. This unit vector is also called "Direction". See Also gce_MakeDir which provides functions for more complex unit vector constructions Geom_Direction which provides additional functions for constructing unit vectors and works, in particular, with the parametric equations of unit vectors. """ def Angle(self,theOther : gp_Dir) -> float: """ Computes the angular value in radians between and . This value is always positive in 3D space. Returns the angle in the range [0, PI] """ def AngleWithRef(self,theOther : gp_Dir,theVRef : gp_Dir) -> float: """ Computes the angular value between and . is the direction of reference normal to and and its orientation gives the positive sense of rotation. If the cross product ^ has the same orientation as the angular value is positive else negative. Returns the angular value in the range -PI and PI (in radians). Raises DomainError if and are not parallel this exception is raised when is in the same plane as and The tolerance criterion is Resolution from package gp. """ @overload def Coord(self,theIndex : int) -> float: """ Returns the coordinate of range theIndex : theIndex = 1 => X is returned Ithendex = 2 => Y is returned theIndex = 3 => Z is returned Exceptions Standard_OutOfRange if theIndex is not 1, 2, or 3. Returns for the unit vector its three coordinates theXv, theYv, and theZv. """ @overload def Coord(self) -> tuple[float, float, float]: ... def Cross(self,theRight : gp_Dir) -> None: """ Computes the cross product between two directions Raises the exception ConstructionError if the two directions are parallel because the computed vector cannot be normalized to create a direction. Computes the cross product between two directions Raises the exception ConstructionError if the two directions are parallel because the computed vector cannot be normalized to create a direction. """ def CrossCross(self,theV1 : gp_Dir,theV2 : gp_Dir) -> None: """ None None """ def CrossCrossed(self,theV1 : gp_Dir,theV2 : gp_Dir) -> gp_Dir: """ Computes the double vector product this ^ (theV1 ^ theV2). - CrossCrossed creates a new unit vector. Exceptions Standard_ConstructionError if: - theV1 and theV2 are parallel, or - this unit vector and (theV1 ^ theV2) are parallel. This is because, in these conditions, the computed vector is null and cannot be normalized. Computes the double vector product this ^ (theV1 ^ theV2). - CrossCrossed creates a new unit vector. Exceptions Standard_ConstructionError if: - theV1 and theV2 are parallel, or - this unit vector and (theV1 ^ theV2) are parallel. This is because, in these conditions, the computed vector is null and cannot be normalized. """ def Crossed(self,theRight : gp_Dir) -> gp_Dir: """ Computes the triple vector product. ^ (V1 ^ V2) Raises the exception ConstructionError if V1 and V2 are parallel or and (V1^V2) are parallel because the computed vector can't be normalized to create a direction. Computes the triple vector product. ^ (V1 ^ V2) Raises the exception ConstructionError if V1 and V2 are parallel or and (V1^V2) are parallel because the computed vector can't be normalized to create a direction. """ def Dot(self,theOther : gp_Dir) -> float: """ Computes the scalar product """ def DotCross(self,theV1 : gp_Dir,theV2 : gp_Dir) -> float: """ Computes the triple scalar product * (theV1 ^ theV2). Warnings : The computed vector theV1' = theV1 ^ theV2 is not normalized to create a unitary vector. So this method never raises an exception even if theV1 and theV2 are parallel. """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def InitFromJson(self,theSStream : Any,theStreamPos : int) -> bool: """ Inits the content of me from the stream """ def IsEqual(self,theOther : gp_Dir,theAngularTolerance : float) -> bool: """ Returns True if the angle between the two directions is lower or equal to theAngularTolerance. """ def IsNormal(self,theOther : gp_Dir,theAngularTolerance : float) -> bool: """ Returns True if the angle between this unit vector and the unit vector theOther is equal to Pi/2 (normal). """ def IsOpposite(self,theOther : gp_Dir,theAngularTolerance : float) -> bool: """ Returns True if the angle between this unit vector and the unit vector theOther is equal to Pi (opposite). """ def IsParallel(self,theOther : gp_Dir,theAngularTolerance : float) -> bool: """ Returns true if the angle between this unit vector and the unit vector theOther is equal to 0 or to Pi. Note: the tolerance criterion is given by theAngularTolerance. """ @overload def Mirror(self,theV : gp_Dir) -> None: """ None None None """ @overload def Mirror(self,theA1 : gp_Ax1) -> None: ... @overload def Mirror(self,theA2 : gp_Ax2) -> None: ... @overload def Mirrored(self,theA1 : gp_Ax1) -> gp_Dir: """ Performs the symmetrical transformation of a direction with respect to the direction theV which is the center of the symmetry. Performs the symmetrical transformation of a direction with respect to an axis placement which is the axis of the symmetry. Performs the symmetrical transformation of a direction with respect to a plane. The axis placement theA2 locates the plane of the symmetry : (Location, XDirection, YDirection). """ @overload def Mirrored(self,theA2 : gp_Ax2) -> gp_Dir: ... @overload def Mirrored(self,theV : gp_Dir) -> gp_Dir: ... def Reverse(self) -> None: """ None """ def Reversed(self) -> gp_Dir: """ Reverses the orientation of a direction geometric transformations Performs the symmetrical transformation of a direction with respect to the direction V which is the center of the symmetry.] """ def Rotate(self,theA1 : gp_Ax1,theAng : float) -> None: """ None None """ def Rotated(self,theA1 : gp_Ax1,theAng : float) -> gp_Dir: """ Rotates a direction. theA1 is the axis of the rotation. theAng is the angular value of the rotation in radians. """ @overload def SetCoord(self,theXv : float,theYv : float,theZv : float) -> None: """ For this unit vector, assigns the value Xi to: - the X coordinate if theIndex is 1, or - the Y coordinate if theIndex is 2, or - the Z coordinate if theIndex is 3, and then normalizes it. Warning Remember that all the coordinates of a unit vector are implicitly modified when any single one is changed directly. Exceptions Standard_OutOfRange if theIndex is not 1, 2, or 3. Standard_ConstructionError if either of the following is less than or equal to gp::Resolution(): - Sqrt(Xv*Xv + Yv*Yv + Zv*Zv), or - the modulus of the number triple formed by the new value theXi and the two other coordinates of this vector that were not directly modified. For this unit vector, assigns the values theXv, theYv and theZv to its three coordinates. Remember that all the coordinates of a unit vector are implicitly modified when any single one is changed directly. For this unit vector, assigns the value Xi to: - the X coordinate if theIndex is 1, or - the Y coordinate if theIndex is 2, or - the Z coordinate if theIndex is 3, and then normalizes it. Warning Remember that all the coordinates of a unit vector are implicitly modified when any single one is changed directly. Exceptions Standard_OutOfRange if theIndex is not 1, 2, or 3. Standard_ConstructionError if either of the following is less than or equal to gp::Resolution(): - Sqrt(Xv*Xv + Yv*Yv + Zv*Zv), or - the modulus of the number triple formed by the new value theXi and the two other coordinates of this vector that were not directly modified. For this unit vector, assigns the values theXv, theYv and theZv to its three coordinates. Remember that all the coordinates of a unit vector are implicitly modified when any single one is changed directly. """ @overload def SetCoord(self,theIndex : int,theXi : float) -> None: ... def SetX(self,theX : float) -> None: """ Assigns the given value to the X coordinate of this unit vector. Assigns the given value to the X coordinate of this unit vector. """ @overload def SetXYZ(self,theCoord : gp_XYZ) -> None: """ Assigns the three coordinates of theCoord to this unit vector. Assigns the three coordinates of theCoord to this unit vector. """ @overload def SetXYZ(self,theXYZ : gp_XYZ) -> None: ... def SetY(self,theY : float) -> None: """ Assigns the given value to the Y coordinate of this unit vector. Assigns the given value to the Y coordinate of this unit vector. """ def SetZ(self,theZ : float) -> None: """ Assigns the given value to the Z coordinate of this unit vector. Assigns the given value to the Z coordinate of this unit vector. """ def Transform(self,theT : gp_Trsf) -> None: """ None """ def Transformed(self,theT : gp_Trsf) -> gp_Dir: """ Transforms a direction with a "Trsf" from gp. Warnings : If the scale factor of the "Trsf" theT is negative then the direction is reversed. """ def X(self) -> float: """ Returns the X coordinate for a unit vector. """ def XYZ(self) -> gp_XYZ: """ for this unit vector, returns its three coordinates as a number triplea. """ def Y(self) -> float: """ Returns the Y coordinate for a unit vector. """ def Z(self) -> float: """ Returns the Z coordinate for a unit vector. """ @overload def __init__(self,theV : gp_Vec) -> None: ... @overload def __init__(self,theXv : float,theYv : float,theZv : float) -> None: ... @overload def __init__(self,theCoord : gp_XYZ) -> None: ... @overload def __init__(self) -> None: ... def __ipow__(self,theRight : gp_Dir) -> None: """ None """ def __mul__(self,theOther : gp_Dir) -> float: """ None """ def __pow__(self,theRight : gp_Dir) -> gp_Dir: """ None """ def __rmul__(self,theOther : gp_Dir) -> float: """ None """ def __sub__(self) -> gp_Dir: """ None """ pass class gp_Dir2d(): """ Describes a unit vector in the plane (2D space). This unit vector is also called "Direction". See Also gce_MakeDir2d which provides functions for more complex unit vector constructions Geom2d_Direction which provides additional functions for constructing unit vectors and works, in particular, with the parametric equations of unit vectors """ def Angle(self,theOther : gp_Dir2d) -> float: """ Computes the angular value in radians between and . Returns the angle in the range [-PI, PI]. """ @overload def Coord(self) -> tuple[float, float]: """ For this unit vector returns the coordinate of range theIndex : theIndex = 1 => X is returned theIndex = 2 => Y is returned Raises OutOfRange if theIndex != {1, 2}. For this unit vector returns its two coordinates theXv and theYv. Raises OutOfRange if theIndex != {1, 2}. """ @overload def Coord(self,theIndex : int) -> float: ... def Crossed(self,theRight : gp_Dir2d) -> float: """ Computes the cross product between two directions. """ def Dot(self,theOther : gp_Dir2d) -> float: """ Computes the scalar product """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def IsEqual(self,theOther : gp_Dir2d,theAngularTolerance : float) -> bool: """ Returns True if the two vectors have the same direction i.e. the angle between this unit vector and the unit vector theOther is less than or equal to theAngularTolerance. Returns True if the two vectors have the same direction i.e. the angle between this unit vector and the unit vector theOther is less than or equal to theAngularTolerance. """ def IsNormal(self,theOther : gp_Dir2d,theAngularTolerance : float) -> bool: """ Returns True if the angle between this unit vector and the unit vector theOther is equal to Pi/2 or -Pi/2 (normal) i.e. Abs(Abs(.Angle(theOther)) - PI/2.) <= theAngularTolerance Returns True if the angle between this unit vector and the unit vector theOther is equal to Pi/2 or -Pi/2 (normal) i.e. Abs(Abs(.Angle(theOther)) - PI/2.) <= theAngularTolerance """ def IsOpposite(self,theOther : gp_Dir2d,theAngularTolerance : float) -> bool: """ Returns True if the angle between this unit vector and the unit vector theOther is equal to Pi or -Pi (opposite). i.e. PI - Abs(.Angle(theOther)) <= theAngularTolerance Returns True if the angle between this unit vector and the unit vector theOther is equal to Pi or -Pi (opposite). i.e. PI - Abs(.Angle(theOther)) <= theAngularTolerance """ def IsParallel(self,theOther : gp_Dir2d,theAngularTolerance : float) -> bool: """ returns true if the angle between this unit vector and unit vector theOther is equal to 0, Pi or -Pi. i.e. Abs(Angle(, theOther)) <= theAngularTolerance or PI - Abs(Angle(, theOther)) <= theAngularTolerance returns true if the angle between this unit vector and unit vector theOther is equal to 0, Pi or -Pi. i.e. Abs(Angle(, theOther)) <= theAngularTolerance or PI - Abs(Angle(, theOther)) <= theAngularTolerance """ @overload def Mirror(self,theV : gp_Dir2d) -> None: """ None None """ @overload def Mirror(self,theA : gp_Ax2d) -> None: ... @overload def Mirrored(self,theV : gp_Dir2d) -> gp_Dir2d: """ Performs the symmetrical transformation of a direction with respect to the direction theV which is the center of the symmetry. Performs the symmetrical transformation of a direction with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirrored(self,theA : gp_Ax2d) -> gp_Dir2d: ... def Reverse(self) -> None: """ None """ def Reversed(self) -> gp_Dir2d: """ Reverses the orientation of a direction """ @overload def Rotate(self,Ang : float) -> None: """ None None """ @overload def Rotate(self,theAng : float) -> None: ... def Rotated(self,theAng : float) -> gp_Dir2d: """ Rotates a direction. theAng is the angular value of the rotation in radians. """ @overload def SetCoord(self,theIndex : int,theXi : float) -> None: """ For this unit vector, assigns: the value theXi to: - the X coordinate if theIndex is 1, or - the Y coordinate if theIndex is 2, and then normalizes it. Warning Remember that all the coordinates of a unit vector are implicitly modified when any single one is changed directly. Exceptions Standard_OutOfRange if theIndex is not 1 or 2. Standard_ConstructionError if either of the following is less than or equal to gp::Resolution(): - Sqrt(theXv*theXv + theYv*theYv), or - the modulus of the number pair formed by the new value theXi and the other coordinate of this vector that was not directly modified. Raises OutOfRange if theIndex != {1, 2}. For this unit vector, assigns: - the values theXv and theYv to its two coordinates, Warning Remember that all the coordinates of a unit vector are implicitly modified when any single one is changed directly. Exceptions Standard_OutOfRange if theIndex is not 1 or 2. Standard_ConstructionError if either of the following is less than or equal to gp::Resolution(): - Sqrt(theXv*theXv + theYv*theYv), or - the modulus of the number pair formed by the new value Xi and the other coordinate of this vector that was not directly modified. Raises OutOfRange if theIndex != {1, 2}. For this unit vector, assigns: the value theXi to: - the X coordinate if theIndex is 1, or - the Y coordinate if theIndex is 2, and then normalizes it. Warning Remember that all the coordinates of a unit vector are implicitly modified when any single one is changed directly. Exceptions Standard_OutOfRange if theIndex is not 1 or 2. Standard_ConstructionError if either of the following is less than or equal to gp::Resolution(): - Sqrt(theXv*theXv + theYv*theYv), or - the modulus of the number pair formed by the new value theXi and the other coordinate of this vector that was not directly modified. Raises OutOfRange if theIndex != {1, 2}. For this unit vector, assigns: - the values theXv and theYv to its two coordinates, Warning Remember that all the coordinates of a unit vector are implicitly modified when any single one is changed directly. Exceptions Standard_OutOfRange if theIndex is not 1 or 2. Standard_ConstructionError if either of the following is less than or equal to gp::Resolution(): - Sqrt(theXv*theXv + theYv*theYv), or - the modulus of the number pair formed by the new value Xi and the other coordinate of this vector that was not directly modified. Raises OutOfRange if theIndex != {1, 2}. """ @overload def SetCoord(self,theXv : float,theYv : float) -> None: ... def SetX(self,theX : float) -> None: """ Assigns the given value to the X coordinate of this unit vector, and then normalizes it. Warning Remember that all the coordinates of a unit vector are implicitly modified when any single one is changed directly. Exceptions Standard_ConstructionError if either of the following is less than or equal to gp::Resolution(): - the modulus of Coord, or - the modulus of the number pair formed from the new X or Y coordinate and the other coordinate of this vector that was not directly modified. Assigns the given value to the X coordinate of this unit vector, and then normalizes it. Warning Remember that all the coordinates of a unit vector are implicitly modified when any single one is changed directly. Exceptions Standard_ConstructionError if either of the following is less than or equal to gp::Resolution(): - the modulus of Coord, or - the modulus of the number pair formed from the new X or Y coordinate and the other coordinate of this vector that was not directly modified. """ @overload def SetXY(self,theXY : gp_XY) -> None: """ Assigns: - the two coordinates of theCoord to this unit vector, and then normalizes it. Warning Remember that all the coordinates of a unit vector are implicitly modified when any single one is changed directly. Exceptions Standard_ConstructionError if either of the following is less than or equal to gp::Resolution(): - the modulus of theCoord, or - the modulus of the number pair formed from the new X or Y coordinate and the other coordinate of this vector that was not directly modified. Assigns: - the two coordinates of theCoord to this unit vector, and then normalizes it. Warning Remember that all the coordinates of a unit vector are implicitly modified when any single one is changed directly. Exceptions Standard_ConstructionError if either of the following is less than or equal to gp::Resolution(): - the modulus of theCoord, or - the modulus of the number pair formed from the new X or Y coordinate and the other coordinate of this vector that was not directly modified. """ @overload def SetXY(self,theCoord : gp_XY) -> None: ... def SetY(self,theY : float) -> None: """ Assigns the given value to the Y coordinate of this unit vector, and then normalizes it. Warning Remember that all the coordinates of a unit vector are implicitly modified when any single one is changed directly. Exceptions Standard_ConstructionError if either of the following is less than or equal to gp::Resolution(): - the modulus of Coord, or - the modulus of the number pair formed from the new X or Y coordinate and the other coordinate of this vector that was not directly modified. Assigns the given value to the Y coordinate of this unit vector, and then normalizes it. Warning Remember that all the coordinates of a unit vector are implicitly modified when any single one is changed directly. Exceptions Standard_ConstructionError if either of the following is less than or equal to gp::Resolution(): - the modulus of Coord, or - the modulus of the number pair formed from the new X or Y coordinate and the other coordinate of this vector that was not directly modified. """ def Transform(self,theT : gp_Trsf2d) -> None: """ None """ def Transformed(self,theT : gp_Trsf2d) -> gp_Dir2d: """ Transforms a direction with the "Trsf" theT. Warnings : If the scale factor of the "Trsf" theT is negative then the direction is reversed. """ def X(self) -> float: """ For this unit vector, returns its X coordinate. """ def XY(self) -> gp_XY: """ For this unit vector, returns its two coordinates as a number pair. Comparison between Directions The precision value is an input data. """ def Y(self) -> float: """ For this unit vector, returns its Y coordinate. """ @overload def __init__(self,theCoord : gp_XY) -> None: ... @overload def __init__(self,theV : gp_Vec2d) -> None: ... @overload def __init__(self) -> None: ... @overload def __init__(self,theXv : float,theYv : float) -> None: ... def __mul__(self,theOther : gp_Dir2d) -> float: """ None """ def __pow__(self,theRight : gp_Dir2d) -> float: """ None """ def __rmul__(self,theOther : gp_Dir2d) -> float: """ None """ def __sub__(self) -> gp_Dir2d: """ None """ pass class gp_Elips(): """ Describes an ellipse in 3D space. An ellipse is defined by its major and minor radii and positioned in space with a coordinate system (a gp_Ax2 object) as follows: - the origin of the coordinate system is the center of the ellipse, - its "X Direction" defines the major axis of the ellipse, and - its "Y Direction" defines the minor axis of the ellipse. Together, the origin, "X Direction" and "Y Direction" of this coordinate system define the plane of the ellipse. This coordinate system is the "local coordinate system" of the ellipse. In this coordinate system, the equation of the ellipse is: The "main Direction" of the local coordinate system gives the normal vector to the plane of the ellipse. This vector gives an implicit orientation to the ellipse (definition of the trigonometric sense). We refer to the "main Axis" of the local coordinate system as the "Axis" of the ellipse. See Also gce_MakeElips which provides functions for more complex ellipse constructions Geom_Ellipse which provides additional functions for constructing ellipses and works, in particular, with the parametric equations of ellipses """ def Area(self) -> float: """ Computes the area of the Ellipse. """ def Axis(self) -> gp_Ax1: """ Computes the axis normal to the plane of the ellipse. """ def Directrix1(self) -> gp_Ax1: """ Computes the first or second directrix of this ellipse. These are the lines, in the plane of the ellipse, normal to the major axis, at a distance equal to MajorRadius/e from the center of the ellipse, where e is the eccentricity of the ellipse. The first directrix (Directrix1) is on the positive side of the major axis. The second directrix (Directrix2) is on the negative side. The directrix is returned as an axis (gp_Ax1 object), the origin of which is situated on the "X Axis" of the local coordinate system of this ellipse. Exceptions Standard_ConstructionError if the eccentricity is null (the ellipse has degenerated into a circle). Computes the first or second directrix of this ellipse. These are the lines, in the plane of the ellipse, normal to the major axis, at a distance equal to MajorRadius/e from the center of the ellipse, where e is the eccentricity of the ellipse. The first directrix (Directrix1) is on the positive side of the major axis. The second directrix (Directrix2) is on the negative side. The directrix is returned as an axis (gp_Ax1 object), the origin of which is situated on the "X Axis" of the local coordinate system of this ellipse. Exceptions Standard_ConstructionError if the eccentricity is null (the ellipse has degenerated into a circle). """ def Directrix2(self) -> gp_Ax1: """ This line is obtained by the symmetrical transformation of "Directrix1" with respect to the "YAxis" of the ellipse. Exceptions Standard_ConstructionError if the eccentricity is null (the ellipse has degenerated into a circle). This line is obtained by the symmetrical transformation of "Directrix1" with respect to the "YAxis" of the ellipse. Exceptions Standard_ConstructionError if the eccentricity is null (the ellipse has degenerated into a circle). """ def Eccentricity(self) -> float: """ Returns the eccentricity of the ellipse between 0.0 and 1.0 If f is the distance between the center of the ellipse and the Focus1 then the eccentricity e = f / MajorRadius. Raises ConstructionError if MajorRadius = 0.0 Returns the eccentricity of the ellipse between 0.0 and 1.0 If f is the distance between the center of the ellipse and the Focus1 then the eccentricity e = f / MajorRadius. Raises ConstructionError if MajorRadius = 0.0 """ def Focal(self) -> float: """ Computes the focal distance. It is the distance between the two focus focus1 and focus2 of the ellipse. """ def Focus1(self) -> gp_Pnt: """ Returns the first focus of the ellipse. This focus is on the positive side of the "XAxis" of the ellipse. Returns the first focus of the ellipse. This focus is on the positive side of the "XAxis" of the ellipse. """ def Focus2(self) -> gp_Pnt: """ Returns the second focus of the ellipse. This focus is on the negative side of the "XAxis" of the ellipse. Returns the second focus of the ellipse. This focus is on the negative side of the "XAxis" of the ellipse. """ def Location(self) -> gp_Pnt: """ Returns the center of the ellipse. It is the "Location" point of the coordinate system of the ellipse. """ def MajorRadius(self) -> float: """ Returns the major radius of the ellipse. """ def MinorRadius(self) -> float: """ Returns the minor radius of the ellipse. """ @overload def Mirror(self,theP : gp_Pnt) -> None: """ None None None """ @overload def Mirror(self,theA1 : gp_Ax1) -> None: ... @overload def Mirror(self,theA2 : gp_Ax2) -> None: ... @overload def Mirrored(self,theP : gp_Pnt) -> gp_Elips: """ Performs the symmetrical transformation of an ellipse with respect to the point theP which is the center of the symmetry. Performs the symmetrical transformation of an ellipse with respect to an axis placement which is the axis of the symmetry. Performs the symmetrical transformation of an ellipse with respect to a plane. The axis placement theA2 locates the plane of the symmetry (Location, XDirection, YDirection). """ @overload def Mirrored(self,theA2 : gp_Ax2) -> gp_Elips: ... @overload def Mirrored(self,theA1 : gp_Ax1) -> gp_Elips: ... def Parameter(self) -> float: """ Returns p = (1 - e * e) * MajorRadius where e is the eccentricity of the ellipse. Returns 0 if MajorRadius = 0 Returns p = (1 - e * e) * MajorRadius where e is the eccentricity of the ellipse. Returns 0 if MajorRadius = 0 """ def Position(self) -> gp_Ax2: """ Returns the coordinate system of the ellipse. """ def Rotate(self,theA1 : gp_Ax1,theAng : float) -> None: """ None """ def Rotated(self,theA1 : gp_Ax1,theAng : float) -> gp_Elips: """ Rotates an ellipse. theA1 is the axis of the rotation. theAng is the angular value of the rotation in radians. """ def Scale(self,theP : gp_Pnt,theS : float) -> None: """ None None """ def Scaled(self,theP : gp_Pnt,theS : float) -> gp_Elips: """ Scales an ellipse. theS is the scaling value. Scales an ellipse. theS is the scaling value. """ def SetAxis(self,theA1 : gp_Ax1) -> None: """ Changes the axis normal to the plane of the ellipse. It modifies the definition of this plane. The "XAxis" and the "YAxis" are recomputed. The local coordinate system is redefined so that: - its origin and "main Direction" become those of the axis theA1 (the "X Direction" and "Y Direction" are then recomputed in the same way as for any gp_Ax2), or Raises ConstructionError if the direction of theA1 is parallel to the direction of the "XAxis" of the ellipse. """ def SetLocation(self,theP : gp_Pnt) -> None: """ Modifies this ellipse, by redefining its local coordinate so that its origin becomes theP. """ def SetMajorRadius(self,theMajorRadius : float) -> None: """ The major radius of the ellipse is on the "XAxis" (major axis) of the ellipse. Raises ConstructionError if theMajorRadius < MinorRadius. """ def SetMinorRadius(self,theMinorRadius : float) -> None: """ The minor radius of the ellipse is on the "YAxis" (minor axis) of the ellipse. Raises ConstructionError if theMinorRadius > MajorRadius or MinorRadius < 0. """ def SetPosition(self,theA2 : gp_Ax2) -> None: """ Modifies this ellipse, by redefining its local coordinate so that it becomes theA2. """ def Transform(self,theT : gp_Trsf) -> None: """ None None """ def Transformed(self,theT : gp_Trsf) -> gp_Elips: """ Transforms an ellipse with the transformation theT from class Trsf. Transforms an ellipse with the transformation theT from class Trsf. """ @overload def Translate(self,theV : gp_Vec) -> None: """ None None """ @overload def Translate(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> None: ... @overload def Translated(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> gp_Elips: """ Translates an ellipse in the direction of the vector theV. The magnitude of the translation is the vector's magnitude. Translates an ellipse from the point theP1 to the point theP2. """ @overload def Translated(self,theV : gp_Vec) -> gp_Elips: ... def XAxis(self) -> gp_Ax1: """ Returns the "XAxis" of the ellipse whose origin is the center of this ellipse. It is the major axis of the ellipse. """ def YAxis(self) -> gp_Ax1: """ Returns the "YAxis" of the ellipse whose unit vector is the "X Direction" or the "Y Direction" of the local coordinate system of this ellipse. This is the minor axis of the ellipse. """ @overload def __init__(self,theA2 : gp_Ax2,theMajorRadius : float,theMinorRadius : float) -> None: ... @overload def __init__(self) -> None: ... pass class gp_Elips2d(): """ Describes an ellipse in the plane (2D space). An ellipse is defined by its major and minor radii and positioned in the plane with a coordinate system (a gp_Ax22d object) as follows: - the origin of the coordinate system is the center of the ellipse, - its "X Direction" defines the major axis of the ellipse, and - its "Y Direction" defines the minor axis of the ellipse. This coordinate system is the "local coordinate system" of the ellipse. Its orientation (direct or indirect) gives an implicit orientation to the ellipse. In this coordinate system, the equation of the ellipse is: See Also gce_MakeElips2d which provides functions for more complex ellipse constructions Geom2d_Ellipse which provides additional functions for constructing ellipses and works, in particular, with the parametric equations of ellipses """ def Area(self) -> float: """ Computes the area of the ellipse. """ def Axis(self) -> gp_Ax22d: """ Returns the major axis of the ellipse. """ def Coefficients(self) -> tuple[float, float, float, float, float, float]: """ Returns the coefficients of the implicit equation of the ellipse. theA * (X**2) + theB * (Y**2) + 2*theC*(X*Y) + 2*theD*X + 2*theE*Y + theF = 0. """ def Directrix1(self) -> gp_Ax2d: """ This directrix is the line normal to the XAxis of the ellipse in the local plane (Z = 0) at a distance d = MajorRadius / e from the center of the ellipse, where e is the eccentricity of the ellipse. This line is parallel to the "YAxis". The intersection point between directrix1 and the "XAxis" is the location point of the directrix1. This point is on the positive side of the "XAxis". This directrix is the line normal to the XAxis of the ellipse in the local plane (Z = 0) at a distance d = MajorRadius / e from the center of the ellipse, where e is the eccentricity of the ellipse. This line is parallel to the "YAxis". The intersection point between directrix1 and the "XAxis" is the location point of the directrix1. This point is on the positive side of the "XAxis". """ def Directrix2(self) -> gp_Ax2d: """ This line is obtained by the symmetrical transformation of "Directrix1" with respect to the minor axis of the ellipse. This line is obtained by the symmetrical transformation of "Directrix1" with respect to the minor axis of the ellipse. """ def Eccentricity(self) -> float: """ Returns the eccentricity of the ellipse between 0.0 and 1.0 If f is the distance between the center of the ellipse and the Focus1 then the eccentricity e = f / MajorRadius. Returns 0 if MajorRadius = 0. Returns the eccentricity of the ellipse between 0.0 and 1.0 If f is the distance between the center of the ellipse and the Focus1 then the eccentricity e = f / MajorRadius. Returns 0 if MajorRadius = 0. """ def Focal(self) -> float: """ Returns the distance between the center of the ellipse and focus1 or focus2. """ def Focus1(self) -> gp_Pnt2d: """ Returns the first focus of the ellipse. This focus is on the positive side of the major axis of the ellipse. Returns the first focus of the ellipse. This focus is on the positive side of the major axis of the ellipse. """ def Focus2(self) -> gp_Pnt2d: """ Returns the second focus of the ellipse. This focus is on the negative side of the major axis of the ellipse. Returns the second focus of the ellipse. This focus is on the negative side of the major axis of the ellipse. """ def IsDirect(self) -> bool: """ Returns true if the local coordinate system is direct and false in the other case. """ def Location(self) -> gp_Pnt2d: """ Returns the center of the ellipse. """ def MajorRadius(self) -> float: """ Returns the major radius of the Ellipse. """ def MinorRadius(self) -> float: """ Returns the minor radius of the Ellipse. """ @overload def Mirror(self,theA : gp_Ax2d) -> None: """ None None """ @overload def Mirror(self,theP : gp_Pnt2d) -> None: ... @overload def Mirrored(self,theA : gp_Ax2d) -> gp_Elips2d: """ Performs the symmetrical transformation of a ellipse with respect to the point theP which is the center of the symmetry Performs the symmetrical transformation of a ellipse with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirrored(self,theP : gp_Pnt2d) -> gp_Elips2d: ... def Parameter(self) -> float: """ Returns p = (1 - e * e) * MajorRadius where e is the eccentricity of the ellipse. Returns 0 if MajorRadius = 0 Returns p = (1 - e * e) * MajorRadius where e is the eccentricity of the ellipse. Returns 0 if MajorRadius = 0 """ def Reverse(self) -> None: """ None """ def Reversed(self) -> gp_Elips2d: """ None None """ def Rotate(self,theP : gp_Pnt2d,theAng : float) -> None: """ None """ def Rotated(self,theP : gp_Pnt2d,theAng : float) -> gp_Elips2d: """ None """ def Scale(self,theP : gp_Pnt2d,theS : float) -> None: """ None None """ def Scaled(self,theP : gp_Pnt2d,theS : float) -> gp_Elips2d: """ Scales a ellipse. theS is the scaling value. Scales a ellipse. theS is the scaling value. """ def SetAxis(self,theA : gp_Ax22d) -> None: """ Modifies this ellipse, by redefining its local coordinate system so that it becomes theA. """ def SetLocation(self,theP : gp_Pnt2d) -> None: """ Modifies this ellipse, by redefining its local coordinate system so that - its origin becomes theP. """ def SetMajorRadius(self,theMajorRadius : float) -> None: """ Changes the value of the major radius. Raises ConstructionError if theMajorRadius < MinorRadius. """ def SetMinorRadius(self,theMinorRadius : float) -> None: """ Changes the value of the minor radius. Raises ConstructionError if MajorRadius < theMinorRadius or MinorRadius < 0.0 """ def SetXAxis(self,theA : gp_Ax2d) -> None: """ Modifies this ellipse, by redefining its local coordinate system so that its origin and its "X Direction" become those of the axis theA. The "Y Direction" is then recomputed. The orientation of the local coordinate system is not modified. """ def SetYAxis(self,theA : gp_Ax2d) -> None: """ Modifies this ellipse, by redefining its local coordinate system so that its origin and its "Y Direction" become those of the axis theA. The "X Direction" is then recomputed. The orientation of the local coordinate system is not modified. """ def Transform(self,theT : gp_Trsf2d) -> None: """ None None """ def Transformed(self,theT : gp_Trsf2d) -> gp_Elips2d: """ Transforms an ellipse with the transformation theT from class Trsf2d. Transforms an ellipse with the transformation theT from class Trsf2d. """ @overload def Translate(self,theV : gp_Vec2d) -> None: """ None None """ @overload def Translate(self,theP1 : gp_Pnt2d,theP2 : gp_Pnt2d) -> None: ... @overload def Translated(self,theV : gp_Vec2d) -> gp_Elips2d: """ Translates a ellipse in the direction of the vector theV. The magnitude of the translation is the vector's magnitude. Translates a ellipse from the point theP1 to the point theP2. """ @overload def Translated(self,theP1 : gp_Pnt2d,theP2 : gp_Pnt2d) -> gp_Elips2d: ... def XAxis(self) -> gp_Ax2d: """ Returns the major axis of the ellipse. """ def YAxis(self) -> gp_Ax2d: """ Returns the minor axis of the ellipse. Reverses the direction of the circle. """ @overload def __init__(self,theA : gp_Ax22d,theMajorRadius : float,theMinorRadius : float) -> None: ... @overload def __init__(self) -> None: ... @overload def __init__(self,theMajorAxis : gp_Ax2d,theMajorRadius : float,theMinorRadius : float,theIsSense : bool=True) -> None: ... pass class gp_EulerSequence(): """ Enumerates all 24 possible variants of generalized Euler angles, defining general 3d rotation by three rotations around main axes of coordinate system, in different possible orders. Members: gp_EulerAngles gp_YawPitchRoll gp_Extrinsic_XYZ gp_Extrinsic_XZY gp_Extrinsic_YZX gp_Extrinsic_YXZ gp_Extrinsic_ZXY gp_Extrinsic_ZYX gp_Intrinsic_XYZ gp_Intrinsic_XZY gp_Intrinsic_YZX gp_Intrinsic_YXZ gp_Intrinsic_ZXY gp_Intrinsic_ZYX gp_Extrinsic_XYX gp_Extrinsic_XZX gp_Extrinsic_YZY gp_Extrinsic_YXY gp_Extrinsic_ZYZ gp_Extrinsic_ZXZ gp_Intrinsic_XYX gp_Intrinsic_XZX gp_Intrinsic_YZY gp_Intrinsic_YXY gp_Intrinsic_ZXZ gp_Intrinsic_ZYZ """ def __eq__(self,other : object) -> bool: ... def __getstate__(self) -> int: ... def __hash__(self) -> int: ... def __index__(self) -> int: ... def __init__(self,value : int) -> None: ... def __int__(self) -> int: ... def __ne__(self,other : object) -> bool: ... def __repr__(self) -> str: ... def __setstate__(self,state : int) -> None: ... def __str__(self) -> str: ... @property def name(self) -> None: """ :type: None """ @property def value(self) -> int: """ :type: int """ __entries: dict # value = {'gp_EulerAngles': (, None), 'gp_YawPitchRoll': (, None), 'gp_Extrinsic_XYZ': (, None), 'gp_Extrinsic_XZY': (, None), 'gp_Extrinsic_YZX': (, None), 'gp_Extrinsic_YXZ': (, None), 'gp_Extrinsic_ZXY': (, None), 'gp_Extrinsic_ZYX': (, None), 'gp_Intrinsic_XYZ': (, None), 'gp_Intrinsic_XZY': (, None), 'gp_Intrinsic_YZX': (, None), 'gp_Intrinsic_YXZ': (, None), 'gp_Intrinsic_ZXY': (, None), 'gp_Intrinsic_ZYX': (, None), 'gp_Extrinsic_XYX': (, None), 'gp_Extrinsic_XZX': (, None), 'gp_Extrinsic_YZY': (, None), 'gp_Extrinsic_YXY': (, None), 'gp_Extrinsic_ZYZ': (, None), 'gp_Extrinsic_ZXZ': (, None), 'gp_Intrinsic_XYX': (, None), 'gp_Intrinsic_XZX': (, None), 'gp_Intrinsic_YZY': (, None), 'gp_Intrinsic_YXY': (, None), 'gp_Intrinsic_ZXZ': (, None), 'gp_Intrinsic_ZYZ': (, None)} __members__: dict # value = {'gp_EulerAngles': , 'gp_YawPitchRoll': , 'gp_Extrinsic_XYZ': , 'gp_Extrinsic_XZY': , 'gp_Extrinsic_YZX': , 'gp_Extrinsic_YXZ': , 'gp_Extrinsic_ZXY': , 'gp_Extrinsic_ZYX': , 'gp_Intrinsic_XYZ': , 'gp_Intrinsic_XZY': , 'gp_Intrinsic_YZX': , 'gp_Intrinsic_YXZ': , 'gp_Intrinsic_ZXY': , 'gp_Intrinsic_ZYX': , 'gp_Extrinsic_XYX': , 'gp_Extrinsic_XZX': , 'gp_Extrinsic_YZY': , 'gp_Extrinsic_YXY': , 'gp_Extrinsic_ZYZ': , 'gp_Extrinsic_ZXZ': , 'gp_Intrinsic_XYX': , 'gp_Intrinsic_XZX': , 'gp_Intrinsic_YZY': , 'gp_Intrinsic_YXY': , 'gp_Intrinsic_ZXZ': , 'gp_Intrinsic_ZYZ': } gp_EulerAngles: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_XYX: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_XYZ: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_XZX: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_XZY: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_YXY: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_YXZ: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_YZX: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_YZY: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_ZXY: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_ZXZ: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_ZYX: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_ZYZ: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_XYX: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_XYZ: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_XZX: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_XZY: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_YXY: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_YXZ: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_YZX: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_YZY: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_ZXY: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_ZXZ: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_ZYX: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_ZYZ: OCP.gp.gp_EulerSequence # value = gp_YawPitchRoll: OCP.gp.gp_EulerSequence # value = pass class gp_GTrsf(): """ Defines a non-persistent transformation in 3D space. This transformation is a general transformation. It can be a gp_Trsf, an affinity, or you can define your own transformation giving the matrix of transformation. """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def Form(self) -> gp_TrsfForm: """ Returns the nature of the transformation. It can be an identity transformation, a rotation, a translation, a mirror transformation (relative to a point, an axis or a plane), a scaling transformation, a compound transformation or some other type of transformation. """ def Invert(self) -> None: """ None """ def Inverted(self) -> gp_GTrsf: """ Computes the reverse transformation. Raises an exception if the matrix of the transformation is not inversible. """ def IsNegative(self) -> bool: """ Returns true if the determinant of the vectorial part of this transformation is negative. """ def IsSingular(self) -> bool: """ Returns true if this transformation is singular (and therefore, cannot be inverted). Note: The Gauss LU decomposition is used to invert the transformation matrix. Consequently, the transformation is considered as singular if the largest pivot found is less than or equal to gp::Resolution(). Warning If this transformation is singular, it cannot be inverted. """ def Multiplied(self,theT : gp_GTrsf) -> gp_GTrsf: """ Computes the transformation composed from theT and . In a C++ implementation you can also write Tcomposed = * theT. Example : """ def Multiply(self,theT : gp_GTrsf) -> None: """ Computes the transformation composed with and theT. = * theT """ def Power(self,theN : int) -> None: """ None """ def Powered(self,theN : int) -> gp_GTrsf: """ Computes: - the product of this transformation multiplied by itself theN times, if theN is positive, or - the product of the inverse of this transformation multiplied by itself |theN| times, if theN is negative. If theN equals zero, the result is equal to the Identity transformation. I.e.: * * .......* , theN time. if theN =0 = Identity if theN < 0 = .Inverse() *...........* .Inverse(). """ def PreMultiply(self,theT : gp_GTrsf) -> None: """ Computes the product of the transformation theT and this transformation and assigns the result to this transformation. this = theT * this """ @overload def SetAffinity(self,theA1 : gp_Ax1,theRatio : float) -> None: """ Changes this transformation into an affinity of ratio theRatio with respect to the axis theA1. Note: an affinity is a point-by-point transformation that transforms any point P into a point P' such that if H is the orthogonal projection of P on the axis theA1 or the plane A2, the vectors HP and HP' satisfy: HP' = theRatio * HP. Changes this transformation into an affinity of ratio theRatio with respect to the plane defined by the origin, the "X Direction" and the "Y Direction" of coordinate system theA2. Note: an affinity is a point-by-point transformation that transforms any point P into a point P' such that if H is the orthogonal projection of P on the axis A1 or the plane theA2, the vectors HP and HP' satisfy: HP' = theRatio * HP. Changes this transformation into an affinity of ratio theRatio with respect to the axis theA1. Note: an affinity is a point-by-point transformation that transforms any point P into a point P' such that if H is the orthogonal projection of P on the axis theA1 or the plane A2, the vectors HP and HP' satisfy: HP' = theRatio * HP. Changes this transformation into an affinity of ratio theRatio with respect to the plane defined by the origin, the "X Direction" and the "Y Direction" of coordinate system theA2. Note: an affinity is a point-by-point transformation that transforms any point P into a point P' such that if H is the orthogonal projection of P on the axis A1 or the plane theA2, the vectors HP and HP' satisfy: HP' = theRatio * HP. """ @overload def SetAffinity(self,theA2 : gp_Ax2,theRatio : float) -> None: ... def SetForm(self) -> None: """ verify and set the shape of the GTrsf Other or CompoundTrsf Ex : """ def SetTranslationPart(self,theCoord : gp_XYZ) -> None: """ Replaces the translation part of this transformation by the coordinates of the number triple theCoord. """ def SetTrsf(self,theT : gp_Trsf) -> None: """ Assigns the vectorial and translation parts of theT to this transformation. """ def SetValue(self,theRow : int,theCol : int,theValue : float) -> None: """ Replaces the coefficient (theRow, theCol) of the matrix representing this transformation by theValue. Raises OutOfRange if theRow < 1 or theRow > 3 or theCol < 1 or theCol > 4 Replaces the coefficient (theRow, theCol) of the matrix representing this transformation by theValue. Raises OutOfRange if theRow < 1 or theRow > 3 or theCol < 1 or theCol > 4 """ def SetVectorialPart(self,theMatrix : gp_Mat) -> None: """ Replaces the vectorial part of this transformation by theMatrix. """ @overload def Transforms(self) -> tuple[float, float, float]: """ None None Transforms a triplet XYZ with a GTrsf. Transforms a triplet XYZ with a GTrsf. """ @overload def Transforms(self,theCoord : gp_XYZ) -> None: ... def TranslationPart(self) -> gp_XYZ: """ Returns the translation part of the GTrsf. """ def Trsf(self) -> gp_Trsf: """ None None """ def Value(self,theRow : int,theCol : int) -> float: """ Returns the coefficients of the global matrix of transformation. Raises OutOfRange if theRow < 1 or theRow > 3 or theCol < 1 or theCol > 4 Returns the coefficients of the global matrix of transformation. Raises OutOfRange if theRow < 1 or theRow > 3 or theCol < 1 or theCol > 4 """ def VectorialPart(self) -> gp_Mat: """ Computes the vectorial part of the GTrsf. The returned Matrix is a 3*3 matrix. """ def __call__(self,theRow : int,theCol : int) -> float: """ None """ def __imul__(self,theT : gp_GTrsf) -> None: """ None """ @overload def __init__(self,theM : gp_Mat,theV : gp_XYZ) -> None: ... @overload def __init__(self,theT : gp_Trsf) -> None: ... @overload def __init__(self) -> None: ... def __mul__(self,theT : gp_GTrsf) -> gp_GTrsf: """ None """ def __rmul__(self,theT : gp_GTrsf) -> gp_GTrsf: """ None """ pass class gp_GTrsf2d(): """ Defines a non persistent transformation in 2D space. This transformation is a general transformation. It can be a gp_Trsf2d, an affinity, or you can define your own transformation giving the corresponding matrix of transformation. """ def Form(self) -> gp_TrsfForm: """ Returns the nature of the transformation. It can be an identity transformation, a rotation, a translation, a mirror transformation (relative to a point or axis), a scaling transformation, a compound transformation or some other type of transformation. """ def Invert(self) -> None: """ None """ def Inverted(self) -> gp_GTrsf2d: """ Computes the reverse transformation. Raised an exception if the matrix of the transformation is not inversible. """ def IsNegative(self) -> bool: """ Returns true if the determinant of the vectorial part of this transformation is negative. """ def IsSingular(self) -> bool: """ Returns true if this transformation is singular (and therefore, cannot be inverted). Note: The Gauss LU decomposition is used to invert the transformation matrix. Consequently, the transformation is considered as singular if the largest pivot found is less than or equal to gp::Resolution(). Warning If this transformation is singular, it cannot be inverted. """ def Multiplied(self,theT : gp_GTrsf2d) -> gp_GTrsf2d: """ Computes the transformation composed with theT and . In a C++ implementation you can also write Tcomposed = * theT. Example : """ def Multiply(self,theT : gp_GTrsf2d) -> None: """ None """ def Power(self,theN : int) -> None: """ None """ def Powered(self,theN : int) -> gp_GTrsf2d: """ Computes the following composition of transformations * * .......* , theN time. if theN = 0 = Identity if theN < 0 = .Inverse() *...........* .Inverse(). """ def PreMultiply(self,theT : gp_GTrsf2d) -> None: """ Computes the product of the transformation theT and this transformation, and assigns the result to this transformation: this = theT * this """ def SetAffinity(self,theA : gp_Ax2d,theRatio : float) -> None: """ Changes this transformation into an affinity of ratio theRatio with respect to the axis theA. Note: An affinity is a point-by-point transformation that transforms any point P into a point P' such that if H is the orthogonal projection of P on the axis theA, the vectors HP and HP' satisfy: HP' = theRatio * HP. """ def SetTranslationPart(self,theCoord : gp_XY) -> None: """ Replaces the translation part of this transformation by the coordinates of the number pair theCoord. """ def SetTrsf2d(self,theT : gp_Trsf2d) -> None: """ Assigns the vectorial and translation parts of theT to this transformation. Assigns the vectorial and translation parts of theT to this transformation. """ def SetValue(self,theRow : int,theCol : int,theValue : float) -> None: """ Replaces the coefficient (theRow, theCol) of the matrix representing this transformation by theValue, Raises OutOfRange if theRow < 1 or theRow > 2 or theCol < 1 or theCol > 3 Replaces the coefficient (theRow, theCol) of the matrix representing this transformation by theValue, Raises OutOfRange if theRow < 1 or theRow > 2 or theCol < 1 or theCol > 3 """ def SetVectorialPart(self,theMatrix : gp_Mat2d) -> None: """ Replaces the vectorial part of this transformation by theMatrix. """ def Transformed(self,theCoord : gp_XY) -> gp_XY: """ None """ @overload def Transforms(self,theCoord : gp_XY) -> None: """ None None Applies this transformation to the coordinates: - of the number pair Coord, or - X and Y. Applies this transformation to the coordinates: - of the number pair Coord, or - X and Y. """ @overload def Transforms(self) -> tuple[float, float]: ... def TranslationPart(self) -> gp_XY: """ Returns the translation part of the GTrsf2d. """ def Trsf2d(self) -> gp_Trsf2d: """ Converts this transformation into a gp_Trsf2d transformation. Exceptions Standard_ConstructionError if this transformation cannot be converted, i.e. if its form is gp_Other. """ def Value(self,theRow : int,theCol : int) -> float: """ Returns the coefficients of the global matrix of transformation. Raised OutOfRange if theRow < 1 or theRow > 2 or theCol < 1 or theCol > 3 Returns the coefficients of the global matrix of transformation. Raised OutOfRange if theRow < 1 or theRow > 2 or theCol < 1 or theCol > 3 """ def VectorialPart(self) -> gp_Mat2d: """ Computes the vectorial part of the GTrsf2d. The returned Matrix is a 2*2 matrix. """ def __call__(self,theRow : int,theCol : int) -> float: """ None """ def __imul__(self,theT : gp_GTrsf2d) -> None: """ None """ @overload def __init__(self,theM : gp_Mat2d,theV : gp_XY) -> None: ... @overload def __init__(self) -> None: ... @overload def __init__(self,theT : gp_Trsf2d) -> None: ... def __mul__(self,theT : gp_GTrsf2d) -> gp_GTrsf2d: """ None """ def __rmul__(self,theT : gp_GTrsf2d) -> gp_GTrsf2d: """ None """ pass class gp_Hypr(): """ Describes a branch of a hyperbola in 3D space. A hyperbola is defined by its major and minor radii and positioned in space with a coordinate system (a gp_Ax2 object) of which: - the origin is the center of the hyperbola, - the "X Direction" defines the major axis of the hyperbola, and - the "Y Direction" defines the minor axis of the hyperbola. The origin, "X Direction" and "Y Direction" of this coordinate system together define the plane of the hyperbola. This coordinate system is the "local coordinate system" of the hyperbola. In this coordinate system, the equation of the hyperbola is: X*X/(MajorRadius**2)-Y*Y/(MinorRadius**2) = 1.0 The branch of the hyperbola described is the one located on the positive side of the major axis. The "main Direction" of the local coordinate system is a normal vector to the plane of the hyperbola. This vector gives an implicit orientation to the hyperbola. We refer to the "main Axis" of the local coordinate system as the "Axis" of the hyperbola. The following schema shows the plane of the hyperbola, and in it, the respective positions of the three branches of hyperbolas constructed with the functions OtherBranch, ConjugateBranch1, and ConjugateBranch2: Warning The major radius can be less than the minor radius. See Also gce_MakeHypr which provides functions for more complex hyperbola constructions Geom_Hyperbola which provides additional functions for constructing hyperbolas and works, in particular, with the parametric equations of hyperbolas """ def Asymptote1(self) -> gp_Ax1: """ In the local coordinate system of the hyperbola the equation of the hyperbola is (X*X)/(A*A) - (Y*Y)/(B*B) = 1.0 and the equation of the first asymptote is Y = (B/A)*X where A is the major radius and B is the minor radius. Raises ConstructionError if MajorRadius = 0.0 In the local coordinate system of the hyperbola the equation of the hyperbola is (X*X)/(A*A) - (Y*Y)/(B*B) = 1.0 and the equation of the first asymptote is Y = (B/A)*X where A is the major radius and B is the minor radius. Raises ConstructionError if MajorRadius = 0.0 """ def Asymptote2(self) -> gp_Ax1: """ In the local coordinate system of the hyperbola the equation of the hyperbola is (X*X)/(A*A) - (Y*Y)/(B*B) = 1.0 and the equation of the first asymptote is Y = -(B/A)*X. where A is the major radius and B is the minor radius. Raises ConstructionError if MajorRadius = 0.0 In the local coordinate system of the hyperbola the equation of the hyperbola is (X*X)/(A*A) - (Y*Y)/(B*B) = 1.0 and the equation of the first asymptote is Y = -(B/A)*X. where A is the major radius and B is the minor radius. Raises ConstructionError if MajorRadius = 0.0 """ def Axis(self) -> gp_Ax1: """ Returns the axis passing through the center, and normal to the plane of this hyperbola. """ def ConjugateBranch1(self) -> gp_Hypr: """ Computes the branch of hyperbola which is on the positive side of the "YAxis" of . """ def ConjugateBranch2(self) -> gp_Hypr: """ Computes the branch of hyperbola which is on the negative side of the "YAxis" of . """ def Directrix1(self) -> gp_Ax1: """ This directrix is the line normal to the XAxis of the hyperbola in the local plane (Z = 0) at a distance d = MajorRadius / e from the center of the hyperbola, where e is the eccentricity of the hyperbola. This line is parallel to the "YAxis". The intersection point between the directrix1 and the "XAxis" is the "Location" point of the directrix1. This point is on the positive side of the "XAxis". This directrix is the line normal to the XAxis of the hyperbola in the local plane (Z = 0) at a distance d = MajorRadius / e from the center of the hyperbola, where e is the eccentricity of the hyperbola. This line is parallel to the "YAxis". The intersection point between the directrix1 and the "XAxis" is the "Location" point of the directrix1. This point is on the positive side of the "XAxis". """ def Directrix2(self) -> gp_Ax1: """ This line is obtained by the symmetrical transformation of "Directrix1" with respect to the "YAxis" of the hyperbola. This line is obtained by the symmetrical transformation of "Directrix1" with respect to the "YAxis" of the hyperbola. """ def Eccentricity(self) -> float: """ Returns the eccentricity of the hyperbola (e > 1). If f is the distance between the location of the hyperbola and the Focus1 then the eccentricity e = f / MajorRadius. Raises DomainError if MajorRadius = 0.0 """ def Focal(self) -> float: """ Computes the focal distance. It is the distance between the the two focus of the hyperbola. """ def Focus1(self) -> gp_Pnt: """ Returns the first focus of the hyperbola. This focus is on the positive side of the "XAxis" of the hyperbola. Returns the first focus of the hyperbola. This focus is on the positive side of the "XAxis" of the hyperbola. """ def Focus2(self) -> gp_Pnt: """ Returns the second focus of the hyperbola. This focus is on the negative side of the "XAxis" of the hyperbola. Returns the second focus of the hyperbola. This focus is on the negative side of the "XAxis" of the hyperbola. """ def Location(self) -> gp_Pnt: """ Returns the location point of the hyperbola. It is the intersection point between the "XAxis" and the "YAxis". """ def MajorRadius(self) -> float: """ Returns the major radius of the hyperbola. It is the radius on the "XAxis" of the hyperbola. """ def MinorRadius(self) -> float: """ Returns the minor radius of the hyperbola. It is the radius on the "YAxis" of the hyperbola. """ @overload def Mirror(self,theP : gp_Pnt) -> None: """ None None None """ @overload def Mirror(self,theA2 : gp_Ax2) -> None: ... @overload def Mirror(self,theA1 : gp_Ax1) -> None: ... @overload def Mirrored(self,theA1 : gp_Ax1) -> gp_Hypr: """ Performs the symmetrical transformation of an hyperbola with respect to the point theP which is the center of the symmetry. Performs the symmetrical transformation of an hyperbola with respect to an axis placement which is the axis of the symmetry. Performs the symmetrical transformation of an hyperbola with respect to a plane. The axis placement theA2 locates the plane of the symmetry (Location, XDirection, YDirection). """ @overload def Mirrored(self,theP : gp_Pnt) -> gp_Hypr: ... @overload def Mirrored(self,theA2 : gp_Ax2) -> gp_Hypr: ... def OtherBranch(self) -> gp_Hypr: """ Returns the branch of hyperbola obtained by doing the symmetrical transformation of with respect to the "YAxis" of . """ def Parameter(self) -> float: """ Returns p = (e * e - 1) * MajorRadius where e is the eccentricity of the hyperbola. Raises DomainError if MajorRadius = 0.0 """ def Position(self) -> gp_Ax2: """ Returns the coordinate system of the hyperbola. """ def Rotate(self,theA1 : gp_Ax1,theAng : float) -> None: """ None """ def Rotated(self,theA1 : gp_Ax1,theAng : float) -> gp_Hypr: """ Rotates an hyperbola. theA1 is the axis of the rotation. theAng is the angular value of the rotation in radians. """ def Scale(self,theP : gp_Pnt,theS : float) -> None: """ None None """ def Scaled(self,theP : gp_Pnt,theS : float) -> gp_Hypr: """ Scales an hyperbola. theS is the scaling value. Scales an hyperbola. theS is the scaling value. """ def SetAxis(self,theA1 : gp_Ax1) -> None: """ Modifies this hyperbola, by redefining its local coordinate system so that: - its origin and "main Direction" become those of the axis theA1 (the "X Direction" and "Y Direction" are then recomputed in the same way as for any gp_Ax2). Raises ConstructionError if the direction of theA1 is parallel to the direction of the "XAxis" of the hyperbola. """ def SetLocation(self,theP : gp_Pnt) -> None: """ Modifies this hyperbola, by redefining its local coordinate system so that its origin becomes theP. """ def SetMajorRadius(self,theMajorRadius : float) -> None: """ Modifies the major radius of this hyperbola. Exceptions Standard_ConstructionError if theMajorRadius is negative. """ def SetMinorRadius(self,theMinorRadius : float) -> None: """ Modifies the minor radius of this hyperbola. Exceptions Standard_ConstructionError if theMinorRadius is negative. """ def SetPosition(self,theA2 : gp_Ax2) -> None: """ Modifies this hyperbola, by redefining its local coordinate system so that it becomes A2. """ def Transform(self,theT : gp_Trsf) -> None: """ None None """ def Transformed(self,theT : gp_Trsf) -> gp_Hypr: """ Transforms an hyperbola with the transformation theT from class Trsf. Transforms an hyperbola with the transformation theT from class Trsf. """ @overload def Translate(self,theV : gp_Vec) -> None: """ None None """ @overload def Translate(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> None: ... @overload def Translated(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> gp_Hypr: """ Translates an hyperbola in the direction of the vector theV. The magnitude of the translation is the vector's magnitude. Translates an hyperbola from the point theP1 to the point theP2. """ @overload def Translated(self,theV : gp_Vec) -> gp_Hypr: ... def XAxis(self) -> gp_Ax1: """ Computes an axis, whose - the origin is the center of this hyperbola, and - the unit vector is the "X Direction" of the local coordinate system of this hyperbola. These axes are, the major axis (the "X Axis") and of this hyperboReturns the "XAxis" of the hyperbola. """ def YAxis(self) -> gp_Ax1: """ Computes an axis, whose - the origin is the center of this hyperbola, and - the unit vector is the "Y Direction" of the local coordinate system of this hyperbola. These axes are the minor axis (the "Y Axis") of this hyperbola """ @overload def __init__(self) -> None: ... @overload def __init__(self,theA2 : gp_Ax2,theMajorRadius : float,theMinorRadius : float) -> None: ... pass class gp_Hypr2d(): """ Describes a branch of a hyperbola in the plane (2D space). A hyperbola is defined by its major and minor radii, and positioned in the plane with a coordinate system (a gp_Ax22d object) of which: - the origin is the center of the hyperbola, - the "X Direction" defines the major axis of the hyperbola, and - the "Y Direction" defines the minor axis of the hyperbola. This coordinate system is the "local coordinate system" of the hyperbola. The orientation of this coordinate system (direct or indirect) gives an implicit orientation to the hyperbola. In this coordinate system, the equation of the hyperbola is: X*X/(MajorRadius**2)-Y*Y/(MinorRadius**2) = 1.0 The branch of the hyperbola described is the one located on the positive side of the major axis. The following schema shows the plane of the hyperbola, and in it, the respective positions of the three branches of hyperbolas constructed with the functions OtherBranch, ConjugateBranch1, and ConjugateBranch2: Warning The major radius can be less than the minor radius. See Also gce_MakeHypr2d which provides functions for more complex hyperbola constructions Geom2d_Hyperbola which provides additional functions for constructing hyperbolas and works, in particular, with the parametric equations of hyperbolas """ def Asymptote1(self) -> gp_Ax2d: """ In the local coordinate system of the hyperbola the equation of the hyperbola is (X*X)/(A*A) - (Y*Y)/(B*B) = 1.0 and the equation of the first asymptote is Y = (B/A)*X where A is the major radius of the hyperbola and B the minor radius of the hyperbola. Raises ConstructionError if MajorRadius = 0.0 In the local coordinate system of the hyperbola the equation of the hyperbola is (X*X)/(A*A) - (Y*Y)/(B*B) = 1.0 and the equation of the first asymptote is Y = (B/A)*X where A is the major radius of the hyperbola and B the minor radius of the hyperbola. Raises ConstructionError if MajorRadius = 0.0 """ def Asymptote2(self) -> gp_Ax2d: """ In the local coordinate system of the hyperbola the equation of the hyperbola is (X*X)/(A*A) - (Y*Y)/(B*B) = 1.0 and the equation of the first asymptote is Y = -(B/A)*X where A is the major radius of the hyperbola and B the minor radius of the hyperbola. Raises ConstructionError if MajorRadius = 0.0 In the local coordinate system of the hyperbola the equation of the hyperbola is (X*X)/(A*A) - (Y*Y)/(B*B) = 1.0 and the equation of the first asymptote is Y = -(B/A)*X where A is the major radius of the hyperbola and B the minor radius of the hyperbola. Raises ConstructionError if MajorRadius = 0.0 """ def Axis(self) -> gp_Ax22d: """ Returns the axisplacement of the hyperbola. """ def Coefficients(self) -> tuple[float, float, float, float, float, float]: """ Computes the coefficients of the implicit equation of the hyperbola : theA * (X**2) + theB * (Y**2) + 2*theC*(X*Y) + 2*theD*X + 2*theE*Y + theF = 0. """ def ConjugateBranch1(self) -> gp_Hypr2d: """ Computes the branch of hyperbola which is on the positive side of the "YAxis" of . """ def ConjugateBranch2(self) -> gp_Hypr2d: """ Computes the branch of hyperbola which is on the negative side of the "YAxis" of . """ def Directrix1(self) -> gp_Ax2d: """ Computes the directrix which is the line normal to the XAxis of the hyperbola in the local plane (Z = 0) at a distance d = MajorRadius / e from the center of the hyperbola, where e is the eccentricity of the hyperbola. This line is parallel to the "YAxis". The intersection point between the "Directrix1" and the "XAxis" is the "Location" point of the "Directrix1". This point is on the positive side of the "XAxis". Computes the directrix which is the line normal to the XAxis of the hyperbola in the local plane (Z = 0) at a distance d = MajorRadius / e from the center of the hyperbola, where e is the eccentricity of the hyperbola. This line is parallel to the "YAxis". The intersection point between the "Directrix1" and the "XAxis" is the "Location" point of the "Directrix1". This point is on the positive side of the "XAxis". """ def Directrix2(self) -> gp_Ax2d: """ This line is obtained by the symmetrical transformation of "Directrix1" with respect to the "YAxis" of the hyperbola. This line is obtained by the symmetrical transformation of "Directrix1" with respect to the "YAxis" of the hyperbola. """ def Eccentricity(self) -> float: """ Returns the eccentricity of the hyperbola (e > 1). If f is the distance between the location of the hyperbola and the Focus1 then the eccentricity e = f / MajorRadius. Raises DomainError if MajorRadius = 0.0. """ def Focal(self) -> float: """ Computes the focal distance. It is the distance between the "Location" of the hyperbola and "Focus1" or "Focus2". """ def Focus1(self) -> gp_Pnt2d: """ Returns the first focus of the hyperbola. This focus is on the positive side of the "XAxis" of the hyperbola. """ def Focus2(self) -> gp_Pnt2d: """ Returns the second focus of the hyperbola. This focus is on the negative side of the "XAxis" of the hyperbola. """ def IsDirect(self) -> bool: """ Returns true if the local coordinate system is direct and false in the other case. """ def Location(self) -> gp_Pnt2d: """ Returns the location point of the hyperbola. It is the intersection point between the "XAxis" and the "YAxis". """ def MajorRadius(self) -> float: """ Returns the major radius of the hyperbola (it is the radius corresponding to the "XAxis" of the hyperbola). """ def MinorRadius(self) -> float: """ Returns the minor radius of the hyperbola (it is the radius corresponding to the "YAxis" of the hyperbola). """ @overload def Mirror(self,theP : gp_Pnt2d) -> None: """ None None """ @overload def Mirror(self,theA : gp_Ax2d) -> None: ... @overload def Mirrored(self,theP : gp_Pnt2d) -> gp_Hypr2d: """ Performs the symmetrical transformation of an hyperbola with respect to the point theP which is the center of the symmetry. Performs the symmetrical transformation of an hyperbola with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirrored(self,theA : gp_Ax2d) -> gp_Hypr2d: ... def OtherBranch(self) -> gp_Hypr2d: """ Returns the branch of hyperbola obtained by doing the symmetrical transformation of with respect to the "YAxis" of . """ def Parameter(self) -> float: """ Returns p = (e * e - 1) * MajorRadius where e is the eccentricity of the hyperbola. Raises DomainError if MajorRadius = 0.0 """ def Reverse(self) -> None: """ None """ def Reversed(self) -> gp_Hypr2d: """ Reverses the orientation of the local coordinate system of this hyperbola (the "Y Axis" is reversed). Therefore, the implicit orientation of this hyperbola is reversed. Note: - Reverse assigns the result to this hyperbola, while - Reversed creates a new one. Reverses the orientation of the local coordinate system of this hyperbola (the "Y Axis" is reversed). Therefore, the implicit orientation of this hyperbola is reversed. Note: - Reverse assigns the result to this hyperbola, while - Reversed creates a new one. """ def Rotate(self,theP : gp_Pnt2d,theAng : float) -> None: """ None """ def Rotated(self,theP : gp_Pnt2d,theAng : float) -> gp_Hypr2d: """ Rotates an hyperbola. theP is the center of the rotation. theAng is the angular value of the rotation in radians. """ def Scale(self,theP : gp_Pnt2d,theS : float) -> None: """ None None """ def Scaled(self,theP : gp_Pnt2d,theS : float) -> gp_Hypr2d: """ Scales an hyperbola. is the scaling value. If is positive only the location point is modified. But if is negative the "XAxis" is reversed and the "YAxis" too. Scales an hyperbola. is the scaling value. If is positive only the location point is modified. But if is negative the "XAxis" is reversed and the "YAxis" too. """ def SetAxis(self,theA : gp_Ax22d) -> None: """ Modifies this hyperbola, by redefining its local coordinate system so that it becomes theA. """ def SetLocation(self,theP : gp_Pnt2d) -> None: """ Modifies this hyperbola, by redefining its local coordinate system so that its origin becomes theP. """ def SetMajorRadius(self,theMajorRadius : float) -> None: """ Modifies the major or minor radius of this hyperbola. Exceptions Standard_ConstructionError if theMajorRadius or MinorRadius is negative. """ def SetMinorRadius(self,theMinorRadius : float) -> None: """ Modifies the major or minor radius of this hyperbola. Exceptions Standard_ConstructionError if MajorRadius or theMinorRadius is negative. """ def SetXAxis(self,theA : gp_Ax2d) -> None: """ Changes the major axis of the hyperbola. The minor axis is recomputed and the location of the hyperbola too. """ def SetYAxis(self,theA : gp_Ax2d) -> None: """ Changes the minor axis of the hyperbola.The minor axis is recomputed and the location of the hyperbola too. """ def Transform(self,theT : gp_Trsf2d) -> None: """ None None """ def Transformed(self,theT : gp_Trsf2d) -> gp_Hypr2d: """ Transforms an hyperbola with the transformation theT from class Trsf2d. Transforms an hyperbola with the transformation theT from class Trsf2d. """ @overload def Translate(self,theV : gp_Vec2d) -> None: """ None None """ @overload def Translate(self,theP1 : gp_Pnt2d,theP2 : gp_Pnt2d) -> None: ... @overload def Translated(self,theP1 : gp_Pnt2d,theP2 : gp_Pnt2d) -> gp_Hypr2d: """ Translates an hyperbola in the direction of the vector theV. The magnitude of the translation is the vector's magnitude. Translates an hyperbola from the point theP1 to the point theP2. """ @overload def Translated(self,theV : gp_Vec2d) -> gp_Hypr2d: ... def XAxis(self) -> gp_Ax2d: """ Computes an axis whose - the origin is the center of this hyperbola, and - the unit vector is the "X Direction" or "Y Direction" respectively of the local coordinate system of this hyperbola Returns the major axis of the hyperbola. """ def YAxis(self) -> gp_Ax2d: """ Computes an axis whose - the origin is the center of this hyperbola, and - the unit vector is the "X Direction" or "Y Direction" respectively of the local coordinate system of this hyperbola Returns the minor axis of the hyperbola. """ @overload def __init__(self) -> None: ... @overload def __init__(self,theA : gp_Ax22d,theMajorRadius : float,theMinorRadius : float) -> None: ... @overload def __init__(self,theMajorAxis : gp_Ax2d,theMajorRadius : float,theMinorRadius : float,theIsSense : bool=True) -> None: ... pass class gp_Lin(): """ Describes a line in 3D space. A line is positioned in space with an axis (a gp_Ax1 object) which gives it an origin and a unit vector. A line and an axis are similar objects, thus, we can convert one into the other. A line provides direct access to the majority of the edit and query functions available on its positioning axis. In addition, however, a line has specific functions for computing distances and positions. See Also gce_MakeLin which provides functions for more complex line constructions Geom_Line which provides additional functions for constructing lines and works, in particular, with the parametric equations of lines """ def Angle(self,theOther : gp_Lin) -> float: """ Computes the angle between two lines in radians. """ def Contains(self,theP : gp_Pnt,theLinearTolerance : float) -> bool: """ Returns true if this line contains the point theP, that is, if the distance between point theP and this line is less than or equal to theLinearTolerance.. """ def Direction(self) -> gp_Dir: """ Returns the direction of the line. """ @overload def Distance(self,theP : gp_Pnt) -> float: """ Computes the distance between and the point theP. Computes the distance between two lines. Computes the distance between and the point theP. """ @overload def Distance(self,theOther : gp_Lin) -> float: ... def Location(self) -> gp_Pnt: """ Returns the location point (origin) of the line. """ @overload def Mirror(self,theA1 : gp_Ax1) -> None: """ None None None """ @overload def Mirror(self,theP : gp_Pnt) -> None: ... @overload def Mirror(self,theA2 : gp_Ax2) -> None: ... @overload def Mirrored(self,theA2 : gp_Ax2) -> gp_Lin: """ Performs the symmetrical transformation of a line with respect to the point theP which is the center of the symmetry. Performs the symmetrical transformation of a line with respect to an axis placement which is the axis of the symmetry. Performs the symmetrical transformation of a line with respect to a plane. The axis placement locates the plane of the symmetry : (Location, XDirection, YDirection). """ @overload def Mirrored(self,theA1 : gp_Ax1) -> gp_Lin: ... @overload def Mirrored(self,theP : gp_Pnt) -> gp_Lin: ... def Normal(self,theP : gp_Pnt) -> gp_Lin: """ Computes the line normal to the direction of , passing through the point theP. Raises ConstructionError if the distance between and the point theP is lower or equal to Resolution from gp because there is an infinity of solutions in 3D space. Computes the line normal to the direction of , passing through the point theP. Raises ConstructionError if the distance between and the point theP is lower or equal to Resolution from gp because there is an infinity of solutions in 3D space. """ def Position(self) -> gp_Ax1: """ Returns the axis placement one axis with the same location and direction as . """ def Reverse(self) -> None: """ None """ def Reversed(self) -> gp_Lin: """ Reverses the direction of the line. Note: - Reverse assigns the result to this line, while - Reversed creates a new one. """ def Rotate(self,theA1 : gp_Ax1,theAng : float) -> None: """ None """ def Rotated(self,theA1 : gp_Ax1,theAng : float) -> gp_Lin: """ Rotates a line. A1 is the axis of the rotation. Ang is the angular value of the rotation in radians. """ def Scale(self,theP : gp_Pnt,theS : float) -> None: """ None """ def Scaled(self,theP : gp_Pnt,theS : float) -> gp_Lin: """ Scales a line. theS is the scaling value. The "Location" point (origin) of the line is modified. The "Direction" is reversed if the scale is negative. """ def SetDirection(self,theV : gp_Dir) -> None: """ Changes the direction of the line. """ def SetLocation(self,theP : gp_Pnt) -> None: """ Changes the location point (origin) of the line. """ def SetPosition(self,theA1 : gp_Ax1) -> None: """ Complete redefinition of the line. The "Location" point of is the origin of the line. The "Direction" of is the direction of the line. """ @overload def SquareDistance(self,theP : gp_Pnt) -> float: """ Computes the square distance between and the point theP. Computes the square distance between two lines. Computes the square distance between and the point theP. """ @overload def SquareDistance(self,theOther : gp_Lin) -> float: ... def Transform(self,theT : gp_Trsf) -> None: """ None """ def Transformed(self,theT : gp_Trsf) -> gp_Lin: """ Transforms a line with the transformation theT from class Trsf. """ @overload def Translate(self,theV : gp_Vec) -> None: """ None None """ @overload def Translate(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> None: ... @overload def Translated(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> gp_Lin: """ Translates a line in the direction of the vector theV. The magnitude of the translation is the vector's magnitude. Translates a line from the point theP1 to the point theP2. """ @overload def Translated(self,theV : gp_Vec) -> gp_Lin: ... @overload def __init__(self,theP : gp_Pnt,theV : gp_Dir) -> None: ... @overload def __init__(self,theA1 : gp_Ax1) -> None: ... @overload def __init__(self) -> None: ... pass class gp_Lin2d(): """ Describes a line in 2D space. A line is positioned in the plane with an axis (a gp_Ax2d object) which gives the line its origin and unit vector. A line and an axis are similar objects, thus, we can convert one into the other. A line provides direct access to the majority of the edit and query functions available on its positioning axis. In addition, however, a line has specific functions for computing distances and positions. See Also GccAna and Geom2dGcc packages which provide functions for constructing lines defined by geometric constraints gce_MakeLin2d which provides functions for more complex line constructions Geom2d_Line which provides additional functions for constructing lines and works, in particular, with the parametric equations of lines """ def Angle(self,theOther : gp_Lin2d) -> float: """ Computes the angle between two lines in radians. """ def Coefficients(self) -> tuple[float, float, float]: """ Returns the normalized coefficients of the line : theA * X + theB * Y + theC = 0. """ def Contains(self,theP : gp_Pnt2d,theLinearTolerance : float) -> bool: """ Returns true if this line contains the point theP, that is, if the distance between point theP and this line is less than or equal to theLinearTolerance. """ def Direction(self) -> gp_Dir2d: """ Returns the direction of the line. """ @overload def Distance(self,theP : gp_Pnt2d) -> float: """ Computes the distance between and the point . Computes the distance between two lines. Computes the distance between and the point . Computes the distance between two lines. """ @overload def Distance(self,theOther : gp_Lin2d) -> float: ... def Location(self) -> gp_Pnt2d: """ Returns the location point (origin) of the line. """ @overload def Mirror(self,theA : gp_Ax2d) -> None: """ None None """ @overload def Mirror(self,theP : gp_Pnt2d) -> None: ... @overload def Mirrored(self,theP : gp_Pnt2d) -> gp_Lin2d: """ Performs the symmetrical transformation of a line with respect to the point which is the center of the symmetry Performs the symmetrical transformation of a line with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirrored(self,theA : gp_Ax2d) -> gp_Lin2d: ... def Normal(self,theP : gp_Pnt2d) -> gp_Lin2d: """ Computes the line normal to the direction of , passing through the point . """ def Position(self) -> gp_Ax2d: """ Returns the axis placement one axis with the same location and direction as . """ def Reverse(self) -> None: """ None """ def Reversed(self) -> gp_Lin2d: """ Reverses the positioning axis of this line. Note: - Reverse assigns the result to this line, while - Reversed creates a new one. """ def Rotate(self,theP : gp_Pnt2d,theAng : float) -> None: """ None """ def Rotated(self,theP : gp_Pnt2d,theAng : float) -> gp_Lin2d: """ Rotates a line. theP is the center of the rotation. theAng is the angular value of the rotation in radians. """ def Scale(self,theP : gp_Pnt2d,theS : float) -> None: """ None """ def Scaled(self,theP : gp_Pnt2d,theS : float) -> gp_Lin2d: """ Scales a line. theS is the scaling value. Only the origin of the line is modified. """ def SetDirection(self,theV : gp_Dir2d) -> None: """ Changes the direction of the line. """ def SetLocation(self,theP : gp_Pnt2d) -> None: """ Changes the origin of the line. """ def SetPosition(self,theA : gp_Ax2d) -> None: """ Complete redefinition of the line. The "Location" point of is the origin of the line. The "Direction" of is the direction of the line. """ @overload def SquareDistance(self,theP : gp_Pnt2d) -> float: """ Computes the square distance between and the point . Computes the square distance between two lines. Computes the square distance between and the point . Computes the square distance between two lines. """ @overload def SquareDistance(self,theOther : gp_Lin2d) -> float: ... def Transform(self,theT : gp_Trsf2d) -> None: """ None """ def Transformed(self,theT : gp_Trsf2d) -> gp_Lin2d: """ Transforms a line with the transformation theT from class Trsf2d. """ @overload def Translate(self,theP1 : gp_Pnt2d,theP2 : gp_Pnt2d) -> None: """ None None """ @overload def Translate(self,theV : gp_Vec2d) -> None: ... @overload def Translated(self,theV : gp_Vec2d) -> gp_Lin2d: """ Translates a line in the direction of the vector theV. The magnitude of the translation is the vector's magnitude. Translates a line from the point theP1 to the point theP2. """ @overload def Translated(self,theP1 : gp_Pnt2d,theP2 : gp_Pnt2d) -> gp_Lin2d: ... @overload def __init__(self) -> None: ... @overload def __init__(self,theA : gp_Ax2d) -> None: ... @overload def __init__(self,theP : gp_Pnt2d,theV : gp_Dir2d) -> None: ... @overload def __init__(self,theA : float,theB : float,theC : float) -> None: ... pass class gp_Mat(): """ Describes a three column, three row matrix. This sort of object is used in various vectorial or matrix computations. """ def Add(self,theOther : gp_Mat) -> None: """ None None """ def Added(self,theOther : gp_Mat) -> gp_Mat: """ Computes the sum of this matrix and the matrix theOther for each coefficient of the matrix : .Coef(i,j) + .Coef(i,j) Computes the sum of this matrix and the matrix theOther for each coefficient of the matrix : .Coef(i,j) + .Coef(i,j) """ def ChangeValue(self,theRow : int,theCol : int) -> float: """ Returns the coefficient of range (theRow, theCol) Raises OutOfRange if theRow < 1 or theRow > 3 or theCol < 1 or theCol > 3 """ def Column(self,theCol : int) -> gp_XYZ: """ Returns the column of theCol index. Raises OutOfRange if theCol < 1 or theCol > 3 """ def Determinant(self) -> float: """ Computes the determinant of the matrix. """ def Diagonal(self) -> gp_XYZ: """ Returns the main diagonal of the matrix. """ def Divide(self,theScalar : float) -> None: """ None None """ def Divided(self,theScalar : float) -> gp_Mat: """ Divides all the coefficients of the matrix by Scalar Divides all the coefficients of the matrix by Scalar """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def Invert(self) -> None: """ None """ def Inverted(self) -> gp_Mat: """ Inverses the matrix and raises if the matrix is singular. - Invert assigns the result to this matrix, while - Inverted creates a new one. Warning The Gauss LU decomposition is used to invert the matrix. Consequently, the matrix is considered as singular if the largest pivot found is less than or equal to gp::Resolution(). Exceptions Standard_ConstructionError if this matrix is singular, and therefore cannot be inverted. """ def IsSingular(self) -> bool: """ The Gauss LU decomposition is used to invert the matrix (see Math package) so the matrix is considered as singular if the largest pivot found is lower or equal to Resolution from gp. """ @overload def Multiplied(self,theScalar : float) -> gp_Mat: """ Computes the product of two matrices * None None """ @overload def Multiplied(self,theOther : gp_Mat) -> gp_Mat: ... @overload def Multiply(self,theScalar : float) -> None: """ Computes the product of two matrices = * . Multiplies all the coefficients of the matrix by Scalar Computes the product of two matrices = * . Multiplies all the coefficients of the matrix by Scalar """ @overload def Multiply(self,theOther : gp_Mat) -> None: ... def Power(self,N : int) -> None: """ None """ def Powered(self,theN : int) -> gp_Mat: """ Computes = * * .......* , theN time. if theN = 0 = Identity if theN < 0 = .Invert() *...........* .Invert(). If theN < 0 an exception will be raised if the matrix is not inversible """ def PreMultiply(self,theOther : gp_Mat) -> None: """ None None """ def Row(self,theRow : int) -> gp_XYZ: """ returns the row of theRow index. Raises OutOfRange if theRow < 1 or theRow > 3 """ def SetCol(self,theCol : int,theValue : gp_XYZ) -> None: """ Assigns the three coordinates of theValue to the column of index theCol of this matrix. Raises OutOfRange if theCol < 1 or theCol > 3. """ def SetCols(self,theCol1 : gp_XYZ,theCol2 : gp_XYZ,theCol3 : gp_XYZ) -> None: """ Assigns the number triples theCol1, theCol2, theCol3 to the three columns of this matrix. """ def SetCross(self,theRef : gp_XYZ) -> None: """ Modifies the matrix M so that applying it to any number triple (X, Y, Z) produces the same result as the cross product of theRef and the number triple (X, Y, Z): i.e.: M * {X,Y,Z}t = theRef.Cross({X, Y ,Z}) this matrix is anti symmetric. To apply this matrix to the triplet {XYZ} is the same as to do the cross product between the triplet theRef and the triplet {XYZ}. Note: this matrix is anti-symmetric. """ def SetDiagonal(self,theX1 : float,theX2 : float,theX3 : float) -> None: """ Modifies the main diagonal of the matrix. The other coefficients of the matrix are not modified. """ def SetDot(self,theRef : gp_XYZ) -> None: """ Modifies this matrix so that applying it to any number triple (X, Y, Z) produces the same result as the scalar product of theRef and the number triple (X, Y, Z): this * (X,Y,Z) = theRef.(X,Y,Z) Note: this matrix is symmetric. """ def SetIdentity(self) -> None: """ Modifies this matrix so that it represents the Identity matrix. """ def SetRotation(self,theAxis : gp_XYZ,theAng : float) -> None: """ Modifies this matrix so that it represents a rotation. theAng is the angular value in radians and the XYZ axis gives the direction of the rotation. Raises ConstructionError if XYZ.Modulus() <= Resolution() """ def SetRow(self,theRow : int,theValue : gp_XYZ) -> None: """ Assigns the three coordinates of Value to the row of index theRow of this matrix. Raises OutOfRange if theRow < 1 or theRow > 3. """ def SetRows(self,theRow1 : gp_XYZ,theRow2 : gp_XYZ,theRow3 : gp_XYZ) -> None: """ Assigns the number triples theRow1, theRow2, theRow3 to the three rows of this matrix. """ def SetScale(self,theS : float) -> None: """ Modifies the matrix so that it represents a scaling transformation, where theS is the scale factor. : """ def SetValue(self,theRow : int,theCol : int,theValue : float) -> None: """ Assigns to the coefficient of row theRow, column theCol of this matrix. Raises OutOfRange if theRow < 1 or theRow > 3 or theCol < 1 or theCol > 3 """ def Subtract(self,theOther : gp_Mat) -> None: """ None None """ def Subtracted(self,theOther : gp_Mat) -> gp_Mat: """ cOmputes for each coefficient of the matrix : .Coef(i,j) - .Coef(i,j) cOmputes for each coefficient of the matrix : .Coef(i,j) - .Coef(i,j) """ def Transpose(self) -> None: """ None None """ def Transposed(self) -> gp_Mat: """ Transposes the matrix. A(j, i) -> A (i, j) """ def Value(self,theRow : int,theCol : int) -> float: """ Returns the coefficient of range (theRow, theCol) Raises OutOfRange if theRow < 1 or theRow > 3 or theCol < 1 or theCol > 3 """ def __add__(self,theOther : gp_Mat) -> gp_Mat: """ None """ def __call__(self,theRow : int,theCol : int) -> float: """ None None """ def __iadd__(self,theOther : gp_Mat) -> None: """ None """ @overload def __imul__(self,theScalar : float) -> None: """ None None """ @overload def __imul__(self,theOther : gp_Mat) -> None: ... @overload def __init__(self) -> None: ... @overload def __init__(self,theA11 : float,theA12 : float,theA13 : float,theA21 : float,theA22 : float,theA23 : float,theA31 : float,theA32 : float,theA33 : float) -> None: ... @overload def __init__(self,theCol1 : gp_XYZ,theCol2 : gp_XYZ,theCol3 : gp_XYZ) -> None: ... def __isub__(self,theOther : gp_Mat) -> None: """ None """ def __itruediv__(self,theScalar : float) -> None: """ None """ @overload def __mul__(self,theOther : gp_Mat) -> gp_Mat: """ None None """ @overload def __mul__(self,theScalar : float) -> gp_Mat: ... @overload def __rmul__(self,theOther : gp_Mat) -> gp_Mat: """ None None """ @overload def __rmul__(self,theScalar : float) -> gp_Mat: ... def __sub__(self,theOther : gp_Mat) -> gp_Mat: """ None """ def __truediv__(self,theScalar : float) -> gp_Mat: """ None """ pass class gp_Mat2d(): """ Describes a two column, two row matrix. This sort of object is used in various vectorial or matrix computations. """ @overload def Add(self,Other : gp_Mat2d) -> None: """ None None """ @overload def Add(self,theOther : gp_Mat2d) -> None: ... def Added(self,theOther : gp_Mat2d) -> gp_Mat2d: """ Computes the sum of this matrix and the matrix theOther.for each coefficient of the matrix : Note: - operator += assigns the result to this matrix, while - operator + creates a new one. Computes the sum of this matrix and the matrix theOther.for each coefficient of the matrix : Note: - operator += assigns the result to this matrix, while - operator + creates a new one. """ def ChangeValue(self,theRow : int,theCol : int) -> float: """ Returns the coefficient of range (theRow, theCol) Raises OutOfRange if theRow < 1 or theRow > 2 or theCol < 1 or theCol > 2 """ def Column(self,theCol : int) -> gp_XY: """ Returns the column of theCol index. Raises OutOfRange if theCol < 1 or theCol > 2 """ def Determinant(self) -> float: """ Computes the determinant of the matrix. """ def Diagonal(self) -> gp_XY: """ Returns the main diagonal of the matrix. """ def Divide(self,theScalar : float) -> None: """ None None """ def Divided(self,theScalar : float) -> gp_Mat2d: """ Divides all the coefficients of the matrix by a scalar. Divides all the coefficients of the matrix by a scalar. """ def Invert(self) -> None: """ None """ def Inverted(self) -> gp_Mat2d: """ Inverses the matrix and raises exception if the matrix is singular. """ def IsSingular(self) -> bool: """ Returns true if this matrix is singular (and therefore, cannot be inverted). The Gauss LU decomposition is used to invert the matrix so the matrix is considered as singular if the largest pivot found is lower or equal to Resolution from gp. """ @overload def Multiplied(self,theScalar : float) -> gp_Mat2d: """ None None None """ @overload def Multiplied(self,theOther : gp_Mat2d) -> gp_Mat2d: ... @overload def Multiply(self,theScalar : float) -> None: """ Computes the product of two matrices * Multiplies all the coefficients of the matrix by a scalar. Computes the product of two matrices * Multiplies all the coefficients of the matrix by a scalar. """ @overload def Multiply(self,theOther : gp_Mat2d) -> None: ... def Power(self,theN : int) -> None: """ None """ def Powered(self,theN : int) -> gp_Mat2d: """ computes = * * .......* , theN time. if theN = 0 = Identity if theN < 0 = .Invert() *...........* .Invert(). If theN < 0 an exception can be raised if the matrix is not inversible """ def PreMultiply(self,theOther : gp_Mat2d) -> None: """ Modifies this matrix by premultiplying it by the matrix Other = theOther * . Modifies this matrix by premultiplying it by the matrix Other = theOther * . """ def Row(self,theRow : int) -> gp_XY: """ Returns the row of index theRow. Raised if theRow < 1 or theRow > 2 """ def SetCol(self,theCol : int,theValue : gp_XY) -> None: """ Assigns the two coordinates of theValue to the column of range theCol of this matrix Raises OutOfRange if theCol < 1 or theCol > 2. """ def SetCols(self,theCol1 : gp_XY,theCol2 : gp_XY) -> None: """ Assigns the number pairs theCol1, theCol2 to the two columns of this matrix """ def SetDiagonal(self,theX1 : float,theX2 : float) -> None: """ Modifies the main diagonal of the matrix. The other coefficients of the matrix are not modified. """ def SetIdentity(self) -> None: """ Modifies this matrix, so that it represents the Identity matrix. """ def SetRotation(self,theAng : float) -> None: """ Modifies this matrix, so that it represents a rotation. theAng is the angular value in radian of the rotation. Modifies this matrix, so that it represents a rotation. theAng is the angular value in radian of the rotation. """ def SetRow(self,theRow : int,theValue : gp_XY) -> None: """ Assigns the two coordinates of theValue to the row of index theRow of this matrix. Raises OutOfRange if theRow < 1 or theRow > 2. """ def SetRows(self,theRow1 : gp_XY,theRow2 : gp_XY) -> None: """ Assigns the number pairs theRow1, theRow2 to the two rows of this matrix. """ def SetScale(self,theS : float) -> None: """ Modifies the matrix such that it represents a scaling transformation, where theS is the scale factor : """ def SetValue(self,theRow : int,theCol : int,theValue : float) -> None: """ Assigns to the coefficient of row theRow, column theCol of this matrix. Raises OutOfRange if theRow < 1 or theRow > 2 or theCol < 1 or theCol > 2 """ def Subtract(self,theOther : gp_Mat2d) -> None: """ None None """ def Subtracted(self,theOther : gp_Mat2d) -> gp_Mat2d: """ Computes for each coefficient of the matrix : Computes for each coefficient of the matrix : """ def Transpose(self) -> None: """ None None """ def Transposed(self) -> gp_Mat2d: """ Transposes the matrix. A(j, i) -> A (i, j) Transposes the matrix. A(j, i) -> A (i, j) """ def Value(self,theRow : int,theCol : int) -> float: """ Returns the coefficient of range (ttheheRow, theCol) Raises OutOfRange if theRow < 1 or theRow > 2 or theCol < 1 or theCol > 2 """ def __add__(self,theOther : gp_Mat2d) -> gp_Mat2d: """ None """ def __call__(self,theRow : int,theCol : int) -> float: """ None None """ def __iadd__(self,theOther : gp_Mat2d) -> None: """ None """ def __imul__(self,theScalar : float) -> None: """ None """ @overload def __init__(self,theCol1 : gp_XY,theCol2 : gp_XY) -> None: ... @overload def __init__(self) -> None: ... def __isub__(self,theOther : gp_Mat2d) -> None: """ None """ def __itruediv__(self,theScalar : float) -> None: """ None """ @overload def __mul__(self,theOther : gp_Mat2d) -> gp_Mat2d: """ None None """ @overload def __mul__(self,theScalar : float) -> gp_Mat2d: ... @overload def __rmul__(self,theOther : gp_Mat2d) -> gp_Mat2d: """ None None """ @overload def __rmul__(self,theScalar : float) -> gp_Mat2d: ... def __sub__(self,theOther : gp_Mat2d) -> gp_Mat2d: """ None """ def __truediv__(self,theScalar : float) -> gp_Mat2d: """ None """ pass class gp_Parab(): """ Describes a parabola in 3D space. A parabola is defined by its focal length (that is, the distance between its focus and apex) and positioned in space with a coordinate system (a gp_Ax2 object) where: - the origin of the coordinate system is on the apex of the parabola, - the "X Axis" of the coordinate system is the axis of symmetry; the parabola is on the positive side of this axis, and - the origin, "X Direction" and "Y Direction" of the coordinate system define the plane of the parabola. The equation of the parabola in this coordinate system, which is the "local coordinate system" of the parabola, is: where P, referred to as the parameter of the parabola, is the distance between the focus and the directrix (P is twice the focal length). The "main Direction" of the local coordinate system gives the normal vector to the plane of the parabola. See Also gce_MakeParab which provides functions for more complex parabola constructions Geom_Parabola which provides additional functions for constructing parabolas and works, in particular, with the parametric equations of parabolas """ def Axis(self) -> gp_Ax1: """ Returns the main axis of the parabola. It is the axis normal to the plane of the parabola passing through the vertex of the parabola. """ def Directrix(self) -> gp_Ax1: """ Computes the directrix of this parabola. The directrix is: - a line parallel to the "Y Direction" of the local coordinate system of this parabola, and - located on the negative side of the axis of symmetry, at a distance from the apex which is equal to the focal length of this parabola. The directrix is returned as an axis (a gp_Ax1 object), the origin of which is situated on the "X Axis" of this parabola. Computes the directrix of this parabola. The directrix is: - a line parallel to the "Y Direction" of the local coordinate system of this parabola, and - located on the negative side of the axis of symmetry, at a distance from the apex which is equal to the focal length of this parabola. The directrix is returned as an axis (a gp_Ax1 object), the origin of which is situated on the "X Axis" of this parabola. """ def Focal(self) -> float: """ Returns the distance between the vertex and the focus of the parabola. """ def Focus(self) -> gp_Pnt: """ - Computes the focus of the parabola. - Computes the focus of the parabola. """ def Location(self) -> gp_Pnt: """ Returns the vertex of the parabola. It is the "Location" point of the coordinate system of the parabola. """ @overload def Mirror(self,theA1 : gp_Ax1) -> None: """ None None None """ @overload def Mirror(self,theA2 : gp_Ax2) -> None: ... @overload def Mirror(self,theP : gp_Pnt) -> None: ... @overload def Mirrored(self,theA1 : gp_Ax1) -> gp_Parab: """ Performs the symmetrical transformation of a parabola with respect to the point theP which is the center of the symmetry. Performs the symmetrical transformation of a parabola with respect to an axis placement which is the axis of the symmetry. Performs the symmetrical transformation of a parabola with respect to a plane. The axis placement theA2 locates the plane of the symmetry (Location, XDirection, YDirection). """ @overload def Mirrored(self,theA2 : gp_Ax2) -> gp_Parab: ... @overload def Mirrored(self,theP : gp_Pnt) -> gp_Parab: ... def Parameter(self) -> float: """ Computes the parameter of the parabola. It is the distance between the focus and the directrix of the parabola. This distance is twice the focal length. """ def Position(self) -> gp_Ax2: """ Returns the local coordinate system of the parabola. """ def Rotate(self,theA1 : gp_Ax1,theAng : float) -> None: """ None """ def Rotated(self,theA1 : gp_Ax1,theAng : float) -> gp_Parab: """ Rotates a parabola. theA1 is the axis of the rotation. Ang is the angular value of the rotation in radians. """ def Scale(self,theP : gp_Pnt,theS : float) -> None: """ None None """ def Scaled(self,theP : gp_Pnt,theS : float) -> gp_Parab: """ Scales a parabola. theS is the scaling value. If theS is negative the direction of the symmetry axis XAxis is reversed and the direction of the YAxis too. Scales a parabola. theS is the scaling value. If theS is negative the direction of the symmetry axis XAxis is reversed and the direction of the YAxis too. """ def SetAxis(self,theA1 : gp_Ax1) -> None: """ Modifies this parabola by redefining its local coordinate system so that - its origin and "main Direction" become those of the axis theA1 (the "X Direction" and "Y Direction" are then recomputed in the same way as for any gp_Ax2) Raises ConstructionError if the direction of theA1 is parallel to the previous XAxis of the parabola. """ def SetFocal(self,theFocal : float) -> None: """ Changes the focal distance of the parabola. Raises ConstructionError if theFocal < 0.0 """ def SetLocation(self,theP : gp_Pnt) -> None: """ Changes the location of the parabola. It is the vertex of the parabola. """ def SetPosition(self,theA2 : gp_Ax2) -> None: """ Changes the local coordinate system of the parabola. """ def Transform(self,theT : gp_Trsf) -> None: """ None None """ def Transformed(self,theT : gp_Trsf) -> gp_Parab: """ Transforms a parabola with the transformation theT from class Trsf. Transforms a parabola with the transformation theT from class Trsf. """ @overload def Translate(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> None: """ None None """ @overload def Translate(self,theV : gp_Vec) -> None: ... @overload def Translated(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> gp_Parab: """ Translates a parabola in the direction of the vector theV. The magnitude of the translation is the vector's magnitude. Translates a parabola from the point theP1 to the point theP2. """ @overload def Translated(self,theV : gp_Vec) -> gp_Parab: ... def XAxis(self) -> gp_Ax1: """ Returns the symmetry axis of the parabola. The location point of the axis is the vertex of the parabola. """ def YAxis(self) -> gp_Ax1: """ It is an axis parallel to the directrix of the parabola. The location point of this axis is the vertex of the parabola. """ @overload def __init__(self) -> None: ... @overload def __init__(self,theD : gp_Ax1,theF : gp_Pnt) -> None: ... @overload def __init__(self,theA2 : gp_Ax2,theFocal : float) -> None: ... pass class gp_Parab2d(): """ Describes a parabola in the plane (2D space). A parabola is defined by its focal length (that is, the distance between its focus and apex) and positioned in the plane with a coordinate system (a gp_Ax22d object) where: - the origin of the coordinate system is on the apex of the parabola, and - the "X Axis" of the coordinate system is the axis of symmetry; the parabola is on the positive side of this axis. This coordinate system is the "local coordinate system" of the parabola. Its orientation (direct or indirect sense) gives an implicit orientation to the parabola. In this coordinate system, the equation for the parabola is: where P, referred to as the parameter of the parabola, is the distance between the focus and the directrix (P is twice the focal length). See Also GCE2d_MakeParab2d which provides functions for more complex parabola constructions Geom2d_Parabola which provides additional functions for constructing parabolas and works, in particular, with the parametric equations of parabolas """ def Axis(self) -> gp_Ax22d: """ Returns the local coordinate system of the parabola. The "Location" point of this axis is the vertex of the parabola. """ def Coefficients(self) -> tuple[float, float, float, float, float, float]: """ Computes the coefficients of the implicit equation of the parabola (in WCS - World Coordinate System). """ def Directrix(self) -> gp_Ax2d: """ Computes the directrix of the parabola. The directrix is: - a line parallel to the "Y Direction" of the local coordinate system of this parabola, and - located on the negative side of the axis of symmetry, at a distance from the apex which is equal to the focal length of this parabola. The directrix is returned as an axis (a gp_Ax2d object), the origin of which is situated on the "X Axis" of this parabola. Computes the directrix of the parabola. The directrix is: - a line parallel to the "Y Direction" of the local coordinate system of this parabola, and - located on the negative side of the axis of symmetry, at a distance from the apex which is equal to the focal length of this parabola. The directrix is returned as an axis (a gp_Ax2d object), the origin of which is situated on the "X Axis" of this parabola. """ def Focal(self) -> float: """ Returns the distance between the vertex and the focus of the parabola. """ def Focus(self) -> gp_Pnt2d: """ Returns the focus of the parabola. """ def IsDirect(self) -> bool: """ Returns true if the local coordinate system is direct and false in the other case. """ def Location(self) -> gp_Pnt2d: """ Returns the vertex of the parabola. """ @overload def Mirror(self,theA : gp_Ax2d) -> None: """ None None """ @overload def Mirror(self,theP : gp_Pnt2d) -> None: ... def MirrorAxis(self) -> gp_Ax2d: """ Returns the symmetry axis of the parabola. The "Location" point of this axis is the vertex of the parabola. """ @overload def Mirrored(self,theP : gp_Pnt2d) -> gp_Parab2d: """ Performs the symmetrical transformation of a parabola with respect to the point theP which is the center of the symmetry Performs the symmetrical transformation of a parabola with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirrored(self,theA : gp_Ax2d) -> gp_Parab2d: ... def Parameter(self) -> float: """ Returns the distance between the focus and the directrix of the parabola. """ def Reverse(self) -> None: """ None """ def Reversed(self) -> gp_Parab2d: """ Reverses the orientation of the local coordinate system of this parabola (the "Y Direction" is reversed). Therefore, the implicit orientation of this parabola is reversed. Note: - Reverse assigns the result to this parabola, while - Reversed creates a new one. Reverses the orientation of the local coordinate system of this parabola (the "Y Direction" is reversed). Therefore, the implicit orientation of this parabola is reversed. Note: - Reverse assigns the result to this parabola, while - Reversed creates a new one. """ def Rotate(self,theP : gp_Pnt2d,theAng : float) -> None: """ None """ def Rotated(self,theP : gp_Pnt2d,theAng : float) -> gp_Parab2d: """ Rotates a parabola. theP is the center of the rotation. theAng is the angular value of the rotation in radians. """ def Scale(self,theP : gp_Pnt2d,theS : float) -> None: """ None None """ def Scaled(self,theP : gp_Pnt2d,theS : float) -> gp_Parab2d: """ Scales a parabola. theS is the scaling value. If theS is negative the direction of the symmetry axis "XAxis" is reversed and the direction of the "YAxis" too. Scales a parabola. theS is the scaling value. If theS is negative the direction of the symmetry axis "XAxis" is reversed and the direction of the "YAxis" too. """ def SetAxis(self,theA : gp_Ax22d) -> None: """ Changes the local coordinate system of the parabola. The "Location" point of A becomes the vertex of the parabola. """ def SetFocal(self,theFocal : float) -> None: """ Changes the focal distance of the parabola Warnings : It is possible to have theFocal = 0. Raises ConstructionError if theFocal < 0.0 """ def SetLocation(self,theP : gp_Pnt2d) -> None: """ Changes the "Location" point of the parabola. It is the vertex of the parabola. """ def SetMirrorAxis(self,theA : gp_Ax2d) -> None: """ Modifies this parabola, by redefining its local coordinate system so that its origin and "X Direction" become those of the axis MA. The "Y Direction" of the local coordinate system is then recomputed. The orientation of the local coordinate system is not modified. """ def Transform(self,theT : gp_Trsf2d) -> None: """ None None """ def Transformed(self,theT : gp_Trsf2d) -> gp_Parab2d: """ Transforms an parabola with the transformation theT from class Trsf2d. Transforms an parabola with the transformation theT from class Trsf2d. """ @overload def Translate(self,theP1 : gp_Pnt2d,theP2 : gp_Pnt2d) -> None: """ None None """ @overload def Translate(self,theV : gp_Vec2d) -> None: ... @overload def Translated(self,theV : gp_Vec2d) -> gp_Parab2d: """ Translates a parabola in the direction of the vectorthe theV. The magnitude of the translation is the vector's magnitude. Translates a parabola from the point theP1 to the point theP2. """ @overload def Translated(self,theP1 : gp_Pnt2d,theP2 : gp_Pnt2d) -> gp_Parab2d: ... @overload def __init__(self,theAxes : gp_Ax22d,theFocalLength : float) -> None: ... @overload def __init__(self,theMirrorAxis : gp_Ax2d,theFocalLength : float,theSense : bool=True) -> None: ... @overload def __init__(self) -> None: ... @overload def __init__(self,theDirectrix : gp_Ax2d,theFocus : gp_Pnt2d,theSense : bool=True) -> None: ... pass class gp_Pln(): """ Describes a plane. A plane is positioned in space with a coordinate system (a gp_Ax3 object), such that the plane is defined by the origin, "X Direction" and "Y Direction" of this coordinate system, which is the "local coordinate system" of the plane. The "main Direction" of the coordinate system is a vector normal to the plane. It gives the plane an implicit orientation such that the plane is said to be "direct", if the coordinate system is right-handed, or "indirect" in the other case. Note: when a gp_Pln plane is converted into a Geom_Plane plane, some implicit properties of its local coordinate system are used explicitly: - its origin defines the origin of the two parameters of the planar surface, - its implicit orientation is also that of the Geom_Plane. See Also gce_MakePln which provides functions for more complex plane constructions Geom_Plane which provides additional functions for constructing planes and works, in particular, with the parametric equations of planes """ def Axis(self) -> gp_Ax1: """ Returns the plane's normal Axis. """ def Coefficients(self) -> tuple[float, float, float, float]: """ Returns the coefficients of the plane's cartesian equation : Returns the coefficients of the plane's cartesian equation : """ @overload def Contains(self,theP : gp_Pnt,theLinearTolerance : float) -> bool: """ Returns true if this plane contains the point theP. This means that - the distance between point theP and this plane is less than or equal to theLinearTolerance, or - line L is normal to the "main Axis" of the local coordinate system of this plane, within the tolerance AngularTolerance, and the distance between the origin of line L and this plane is less than or equal to theLinearTolerance. Returns true if this plane contains the line theL. This means that - the distance between point P and this plane is less than or equal to LinearTolerance, or - line theL is normal to the "main Axis" of the local coordinate system of this plane, within the tolerance theAngularTolerance, and the distance between the origin of line theL and this plane is less than or equal to theLinearTolerance. """ @overload def Contains(self,theL : gp_Lin,theLinearTolerance : float,theAngularTolerance : float) -> bool: ... def Direct(self) -> bool: """ returns true if the Ax3 is right handed. """ @overload def Distance(self,theOther : gp_Pln) -> float: """ Computes the distance between and the point . Computes the distance between and the line . Computes the distance between two planes. Computes the distance between and the point . Computes the distance between and the line . Computes the distance between two planes. """ @overload def Distance(self,theL : gp_Lin) -> float: ... @overload def Distance(self,theP : gp_Pnt) -> float: ... def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def Location(self) -> gp_Pnt: """ Returns the plane's location (origin). """ @overload def Mirror(self,theA2 : gp_Ax2) -> None: """ None None None """ @overload def Mirror(self,theA1 : gp_Ax1) -> None: ... @overload def Mirror(self,theP : gp_Pnt) -> None: ... @overload def Mirrored(self,theA2 : gp_Ax2) -> gp_Pln: """ Performs the symmetrical transformation of a plane with respect to the point which is the center of the symmetry Warnings : The normal direction to the plane is not changed. The "XAxis" and the "YAxis" are reversed. Performs the symmetrical transformation of a plane with respect to an axis placement which is the axis of the symmetry. The transformation is performed on the "Location" point, on the "XAxis" and the "YAxis". The resulting normal direction is the cross product between the "XDirection" and the "YDirection" after transformation if the initial plane was right handed, else it is the opposite. Performs the symmetrical transformation of a plane with respect to an axis placement. The axis placement locates the plane of the symmetry. The transformation is performed on the "Location" point, on the "XAxis" and the "YAxis". The resulting normal direction is the cross product between the "XDirection" and the "YDirection" after transformation if the initial plane was right handed, else it is the opposite. """ @overload def Mirrored(self,theA1 : gp_Ax1) -> gp_Pln: ... @overload def Mirrored(self,theP : gp_Pnt) -> gp_Pln: ... def Position(self) -> gp_Ax3: """ Returns the local coordinate system of the plane . """ def Rotate(self,theA1 : gp_Ax1,theAng : float) -> None: """ None """ def Rotated(self,theA1 : gp_Ax1,theAng : float) -> gp_Pln: """ rotates a plane. theA1 is the axis of the rotation. theAng is the angular value of the rotation in radians. """ def Scale(self,theP : gp_Pnt,theS : float) -> None: """ None """ def Scaled(self,theP : gp_Pnt,theS : float) -> gp_Pln: """ Scales a plane. theS is the scaling value. """ def SetAxis(self,theA1 : gp_Ax1) -> None: """ Modifies this plane, by redefining its local coordinate system so that - its origin and "main Direction" become those of the axis theA1 (the "X Direction" and "Y Direction" are then recomputed). Raises ConstructionError if the theA1 is parallel to the "XAxis" of the plane. """ def SetLocation(self,theLoc : gp_Pnt) -> None: """ Changes the origin of the plane. """ def SetPosition(self,theA3 : gp_Ax3) -> None: """ Changes the local coordinate system of the plane. """ @overload def SquareDistance(self,theOther : gp_Pln) -> float: """ Computes the square distance between and the point . Computes the square distance between and the line . Computes the square distance between two planes. """ @overload def SquareDistance(self,theP : gp_Pnt) -> float: ... @overload def SquareDistance(self,theL : gp_Lin) -> float: ... def Transform(self,theT : gp_Trsf) -> None: """ None """ def Transformed(self,theT : gp_Trsf) -> gp_Pln: """ Transforms a plane with the transformation theT from class Trsf. The transformation is performed on the "Location" point, on the "XAxis" and the "YAxis". The resulting normal direction is the cross product between the "XDirection" and the "YDirection" after transformation. """ @overload def Translate(self,theV : gp_Vec) -> None: """ None None """ @overload def Translate(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> None: ... @overload def Translated(self,theV : gp_Vec) -> gp_Pln: """ Translates a plane in the direction of the vector theV. The magnitude of the translation is the vector's magnitude. Translates a plane from the point theP1 to the point theP2. """ @overload def Translated(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> gp_Pln: ... def UReverse(self) -> None: """ Reverses the U parametrization of the plane reversing the XAxis. """ def VReverse(self) -> None: """ Reverses the V parametrization of the plane reversing the YAxis. """ def XAxis(self) -> gp_Ax1: """ Returns the X axis of the plane. """ def YAxis(self) -> gp_Ax1: """ Returns the Y axis of the plane. """ @overload def __init__(self,theA3 : gp_Ax3) -> None: ... @overload def __init__(self,theP : gp_Pnt,theV : gp_Dir) -> None: ... @overload def __init__(self,theA : float,theB : float,theC : float,theD : float) -> None: ... @overload def __init__(self) -> None: ... pass class gp_Pnt(): """ Defines a 3D cartesian point. """ def BaryCenter(self,theAlpha : float,theP : gp_Pnt,theBeta : float) -> None: """ Assigns the result of the following expression to this point (theAlpha*this + theBeta*theP) / (theAlpha + theBeta) """ def ChangeCoord(self) -> gp_XYZ: """ Returns the coordinates of this point. Note: This syntax allows direct modification of the returned value. """ @overload def Coord(self) -> gp_XYZ: """ Returns the coordinate of corresponding to the value of theIndex : theIndex = 1 => X is returned theIndex = 2 => Y is returned theIndex = 3 => Z is returned Raises OutOfRange if theIndex != {1, 2, 3}. Raised if theIndex != {1, 2, 3}. For this point gives its three coordinates theXp, theYp and theZp. For this point, returns its three coordinates as a XYZ object. """ @overload def Coord(self,theIndex : int) -> float: ... @overload def Coord(self) -> tuple[float, float, float]: ... def Distance(self,theOther : gp_Pnt) -> float: """ Computes the distance between two points. Computes the distance between two points. """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def InitFromJson(self,theSStream : Any,theStreamPos : int) -> bool: """ Inits the content of me from the stream """ def IsEqual(self,theOther : gp_Pnt,theLinearTolerance : float) -> bool: """ Comparison Returns True if the distance between the two points is lower or equal to theLinearTolerance. """ @overload def Mirror(self,theA2 : gp_Ax2) -> None: """ Performs the symmetrical transformation of a point with respect to the point theP which is the center of the symmetry. None None """ @overload def Mirror(self,theP : gp_Pnt) -> None: ... @overload def Mirror(self,theA1 : gp_Ax1) -> None: ... @overload def Mirrored(self,theA2 : gp_Ax2) -> gp_Pnt: """ Performs the symmetrical transformation of a point with respect to an axis placement which is the axis of the symmetry. Performs the symmetrical transformation of a point with respect to a plane. The axis placement theA2 locates the plane of the symmetry : (Location, XDirection, YDirection). Rotates a point. theA1 is the axis of the rotation. theAng is the angular value of the rotation in radians. """ @overload def Mirrored(self,theA1 : gp_Ax1) -> gp_Pnt: ... @overload def Mirrored(self,theP : gp_Pnt) -> gp_Pnt: ... def Rotate(self,theA1 : gp_Ax1,theAng : float) -> None: """ None None """ def Rotated(self,theA1 : gp_Ax1,theAng : float) -> gp_Pnt: """ None """ def Scale(self,theP : gp_Pnt,theS : float) -> None: """ Scales a point. theS is the scaling value. Scales a point. theS is the scaling value. """ def Scaled(self,theP : gp_Pnt,theS : float) -> gp_Pnt: """ None """ @overload def SetCoord(self,theXp : float,theYp : float,theZp : float) -> None: """ Changes the coordinate of range theIndex : theIndex = 1 => X is modified theIndex = 2 => Y is modified theIndex = 3 => Z is modified Raised if theIndex != {1, 2, 3}. For this point, assigns the values theXp, theYp and theZp to its three coordinates. """ @overload def SetCoord(self,theIndex : int,theXi : float) -> None: ... def SetX(self,theX : float) -> None: """ Assigns the given value to the X coordinate of this point. """ def SetXYZ(self,theCoord : gp_XYZ) -> None: """ Assigns the three coordinates of theCoord to this point. """ def SetY(self,theY : float) -> None: """ Assigns the given value to the Y coordinate of this point. """ def SetZ(self,theZ : float) -> None: """ Assigns the given value to the Z coordinate of this point. """ def SquareDistance(self,theOther : gp_Pnt) -> float: """ Computes the square distance between two points. Computes the square distance between two points. """ def Transform(self,theT : gp_Trsf) -> None: """ Transforms a point with the transformation T. """ def Transformed(self,theT : gp_Trsf) -> gp_Pnt: """ None """ @overload def Translate(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> None: """ Translates a point in the direction of the vector theV. The magnitude of the translation is the vector's magnitude. Translates a point from the point theP1 to the point theP2. Translates a point in the direction of the vector theV. The magnitude of the translation is the vector's magnitude. """ @overload def Translate(self,theV : gp_Vec) -> None: ... @overload def Translated(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> gp_Pnt: """ None None None """ @overload def Translated(self,theV : gp_Vec) -> gp_Pnt: ... def X(self) -> float: """ For this point, returns its X coordinate. """ def XYZ(self) -> gp_XYZ: """ For this point, returns its three coordinates as a XYZ object. """ def Y(self) -> float: """ For this point, returns its Y coordinate. """ def Z(self) -> float: """ For this point, returns its Z coordinate. """ @overload def __init__(self,theCoord : gp_XYZ) -> None: ... @overload def __init__(self,theXp : float,theYp : float,theZp : float) -> None: ... @overload def __init__(self) -> None: ... pass class gp_Pnt2d(): """ Defines a non-persistent 2D cartesian point. """ def ChangeCoord(self) -> gp_XY: """ Returns the coordinates of this point. Note: This syntax allows direct modification of the returned value. """ @overload def Coord(self) -> gp_XY: """ Returns the coordinate of range theIndex : theIndex = 1 => X is returned theIndex = 2 => Y is returned Raises OutOfRange if theIndex != {1, 2}. For this point returns its two coordinates as a number pair. For this point, returns its two coordinates as a number pair. """ @overload def Coord(self) -> tuple[float, float]: ... @overload def Coord(self,theIndex : int) -> float: ... def Distance(self,theOther : gp_Pnt2d) -> float: """ Computes the distance between two points. Computes the distance between two points. """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def IsEqual(self,theOther : gp_Pnt2d,theLinearTolerance : float) -> bool: """ Comparison Returns True if the distance between the two points is lower or equal to theLinearTolerance. """ @overload def Mirror(self,theA : gp_Ax2d) -> None: """ Performs the symmetrical transformation of a point with respect to the point theP which is the center of the symmetry. None """ @overload def Mirror(self,theP : gp_Pnt2d) -> None: ... @overload def Mirrored(self,theP : gp_Pnt2d) -> gp_Pnt2d: """ Performs the symmetrical transformation of a point with respect to an axis placement which is the axis None """ @overload def Mirrored(self,theA : gp_Ax2d) -> gp_Pnt2d: ... def Rotate(self,theP : gp_Pnt2d,theAng : float) -> None: """ Rotates a point. theA1 is the axis of the rotation. Ang is the angular value of the rotation in radians. Rotates a point. theA1 is the axis of the rotation. Ang is the angular value of the rotation in radians. """ def Rotated(self,theP : gp_Pnt2d,theAng : float) -> gp_Pnt2d: """ None """ def Scale(self,theP : gp_Pnt2d,theS : float) -> None: """ Scales a point. theS is the scaling value. Scales a point. theS is the scaling value. """ def Scaled(self,theP : gp_Pnt2d,theS : float) -> gp_Pnt2d: """ None """ @overload def SetCoord(self,theXp : float,theYp : float) -> None: """ Assigns the value Xi to the coordinate that corresponds to theIndex: theIndex = 1 => X is modified theIndex = 2 => Y is modified Raises OutOfRange if theIndex != {1, 2}. For this point, assigns the values theXp and theYp to its two coordinates """ @overload def SetCoord(self,theIndex : int,theXi : float) -> None: ... def SetX(self,theX : float) -> None: """ Assigns the given value to the X coordinate of this point. """ def SetXY(self,theCoord : gp_XY) -> None: """ Assigns the two coordinates of Coord to this point. """ def SetY(self,theY : float) -> None: """ Assigns the given value to the Y coordinate of this point. """ def SquareDistance(self,theOther : gp_Pnt2d) -> float: """ Computes the square distance between two points. Computes the square distance between two points. """ def Transform(self,theT : gp_Trsf2d) -> None: """ Transforms a point with the transformation theT. """ def Transformed(self,theT : gp_Trsf2d) -> gp_Pnt2d: """ None """ @overload def Translate(self,theP1 : gp_Pnt2d,theP2 : gp_Pnt2d) -> None: """ Translates a point in the direction of the vector theV. The magnitude of the translation is the vector's magnitude. Translates a point from the point theP1 to the point theP2. Translates a point in the direction of the vector theV. The magnitude of the translation is the vector's magnitude. """ @overload def Translate(self,theV : gp_Vec2d) -> None: ... @overload def Translated(self,theP1 : gp_Pnt2d,theP2 : gp_Pnt2d) -> gp_Pnt2d: """ None None None """ @overload def Translated(self,theV : gp_Vec2d) -> gp_Pnt2d: ... def X(self) -> float: """ For this point, returns its X coordinate. """ def XY(self) -> gp_XY: """ For this point, returns its two coordinates as a number pair. """ def Y(self) -> float: """ For this point, returns its Y coordinate. """ @overload def __init__(self,theCoord : gp_XY) -> None: ... @overload def __init__(self,theXp : float,theYp : float) -> None: ... @overload def __init__(self) -> None: ... pass class gp_Quaternion(): """ Represents operation of rotation in 3d space as quaternion and implements operations with rotations basing on quaternion mathematics. """ @overload def Add(self,theOther : gp_Quaternion) -> None: """ Adds components of other quaternion; result is "rotations mix" Adds components of other quaternion; result is "rotations mix" """ @overload def Add(self,theQ : gp_Quaternion) -> None: ... def Added(self,theOther : gp_Quaternion) -> gp_Quaternion: """ Makes sum of quaternion components; result is "rotations mix" """ def Dot(self,theOther : gp_Quaternion) -> float: """ Computes inner product / scalar product / Dot """ def GetEulerAngles(self,theOrder : gp_EulerSequence) -> tuple[float, float, float]: """ Returns Euler angles describing current rotation """ def GetMatrix(self) -> gp_Mat: """ Returns rotation operation as 3*3 matrix """ def GetRotationAngle(self) -> float: """ Return rotation angle from -PI to PI """ def GetVectorAndAngle(self,theAxis : gp_Vec) -> tuple[float]: """ Convert a quaternion to Axis+Angle representation, preserve the axis direction and angle from -PI to +PI """ def Invert(self) -> None: """ Inverts quaternion (both rotation direction and norm) """ def Inverted(self) -> gp_Quaternion: """ Return inversed quaternion q^-1 """ def IsEqual(self,theOther : gp_Quaternion) -> bool: """ Simple equal test without precision """ @overload def Multiplied(self,theOther : gp_Quaternion) -> gp_Quaternion: """ Multiply function - work the same as Matrices multiplying. Result is rotation combination: q' than q (here q=this, q'=theQ). Notices that: Multiply function - work the same as Matrices multiplying. Result is rotation combination: q' than q (here q=this, q'=theQ). Notices that: """ @overload def Multiplied(self,theQ : gp_Quaternion) -> gp_Quaternion: ... @overload def Multiply(self,theOther : gp_Quaternion) -> None: """ Adds rotation by multiplication Rotates vector by quaternion as rotation operator """ @overload def Multiply(self,theVec : gp_Vec) -> gp_Vec: ... def Negated(self) -> gp_Quaternion: """ Returns quaternion with all components negated. Note that this operation does not affect neither rotation operator defined by quaternion nor its norm. """ def Norm(self) -> float: """ Returns norm of quaternion """ def Normalize(self) -> None: """ Scale quaternion that its norm goes to 1. The appearing of 0 magnitude or near is a error, so we can be sure that can divide by magnitude """ def Normalized(self) -> gp_Quaternion: """ Returns quaternion scaled so that its norm goes to 1. """ def Reverse(self) -> None: """ Reverse direction of rotation (conjugate quaternion) """ def Reversed(self) -> gp_Quaternion: """ Return rotation with reversed direction (conjugated quaternion) """ def Scale(self,theScale : float) -> None: """ Scale all components by quaternion by theScale; note that rotation is not changed by this operation (except 0-scaling) Scale all components by quaternion by theScale; note that rotation is not changed by this operation (except 0-scaling) """ def Scaled(self,theScale : float) -> gp_Quaternion: """ Returns scaled quaternion """ @overload def Set(self,theQuaternion : gp_Quaternion) -> None: """ None None None None """ @overload def Set(self,theX : float,theY : float,theZ : float,theW : float) -> None: ... def SetEulerAngles(self,theOrder : gp_EulerSequence,theAlpha : float,theBeta : float,theGamma : float) -> None: """ Create a unit quaternion representing rotation defined by generalized Euler angles """ def SetIdent(self) -> None: """ Make identity quaternion (zero-rotation) """ def SetMatrix(self,theMat : gp_Mat) -> None: """ Create a unit quaternion by rotation matrix matrix must contain only rotation (not scale or shear) """ @overload def SetRotation(self,theVecFrom : gp_Vec,theVecTo : gp_Vec) -> None: """ Sets quaternion to shortest-arc rotation producing vector theVecTo from vector theVecFrom. If vectors theVecFrom and theVecTo are opposite then rotation axis is computed as theVecFrom ^ (1,0,0) or theVecFrom ^ (0,0,1). Sets quaternion to shortest-arc rotation producing vector theVecTo from vector theVecFrom. If vectors theVecFrom and theVecTo are opposite then rotation axis is computed as theVecFrom ^ theHelpCrossVec. """ @overload def SetRotation(self,theVecFrom : gp_Vec,theVecTo : gp_Vec,theHelpCrossVec : gp_Vec) -> None: ... def SetVectorAndAngle(self,theAxis : gp_Vec,theAngle : float) -> None: """ Create a unit quaternion from Axis+Angle representation """ def SquareNorm(self) -> float: """ Returns square norm of quaternion """ def StabilizeLength(self) -> None: """ Stabilize quaternion length within 1 - 1/4. This operation is a lot faster than normalization and preserve length goes to 0 or infinity """ @overload def Subtract(self,theOther : gp_Quaternion) -> None: """ Subtracts components of other quaternion; result is "rotations mix" Subtracts components of other quaternion; result is "rotations mix" """ @overload def Subtract(self,theQ : gp_Quaternion) -> None: ... def Subtracted(self,theOther : gp_Quaternion) -> gp_Quaternion: """ Makes difference of quaternion components; result is "rotations mix" """ def W(self) -> float: """ None """ def X(self) -> float: """ None """ def Y(self) -> float: """ None """ def Z(self) -> float: """ None """ def __add__(self,theOther : gp_Quaternion) -> gp_Quaternion: """ None """ def __iadd__(self,theOther : gp_Quaternion) -> None: """ None """ @overload def __imul__(self,theOther : gp_Quaternion) -> None: """ None None """ @overload def __imul__(self,theScale : float) -> None: ... @overload def __init__(self,theMat : gp_Mat) -> None: ... @overload def __init__(self) -> None: ... @overload def __init__(self,theAxis : gp_Vec,theAngle : float) -> None: ... @overload def __init__(self,theX : float,theY : float,theZ : float,theW : float) -> None: ... @overload def __init__(self,theVecFrom : gp_Vec,theVecTo : gp_Vec,theHelpCrossVec : gp_Vec) -> None: ... @overload def __init__(self,theVecFrom : gp_Vec,theVecTo : gp_Vec) -> None: ... def __isub__(self,theOther : gp_Quaternion) -> None: """ None """ @overload def __mul__(self,theVec : gp_Vec) -> gp_Vec: """ None None None """ @overload def __mul__(self,theScale : float) -> gp_Quaternion: ... @overload def __mul__(self,theOther : gp_Quaternion) -> gp_Quaternion: ... @overload def __rmul__(self,theVec : gp_Vec) -> gp_Vec: """ None None None """ @overload def __rmul__(self,theScale : float) -> gp_Quaternion: ... @overload def __rmul__(self,theOther : gp_Quaternion) -> gp_Quaternion: ... @overload def __sub__(self) -> gp_Quaternion: """ None None """ @overload def __sub__(self,theOther : gp_Quaternion) -> gp_Quaternion: ... pass class gp_QuaternionNLerp(): """ Class perform linear interpolation (approximate rotation interpolation), result quaternion nonunit, its length lay between. sqrt(2)/2 and 1.0 """ def Init(self,theQStart : gp_Quaternion,theQEnd : gp_Quaternion) -> None: """ Initialize the tool with Start and End values. """ def InitFromUnit(self,theQStart : gp_Quaternion,theQEnd : gp_Quaternion) -> None: """ Initialize the tool with Start and End unit quaternions. """ def Interpolate(self,theT : float,theResultQ : gp_Quaternion) -> None: """ Set interpolated quaternion for theT position (from 0.0 to 1.0) """ @staticmethod def Interpolate_s(theQStart : gp_Quaternion,theQEnd : gp_Quaternion,theT : float) -> gp_Quaternion: """ Compute interpolated quaternion between two quaternions. """ @overload def __init__(self) -> None: ... @overload def __init__(self,theQStart : gp_Quaternion,theQEnd : gp_Quaternion) -> None: ... pass class gp_QuaternionSLerp(): """ Perform Spherical Linear Interpolation of the quaternions, return unit length quaternion. """ def Init(self,theQStart : gp_Quaternion,theQEnd : gp_Quaternion) -> None: """ Initialize the tool with Start and End values. """ def InitFromUnit(self,theQStart : gp_Quaternion,theQEnd : gp_Quaternion) -> None: """ Initialize the tool with Start and End unit quaternions. """ def Interpolate(self,theT : float,theResultQ : gp_Quaternion) -> None: """ Set interpolated quaternion for theT position (from 0.0 to 1.0) """ @staticmethod def Interpolate_s(theQStart : gp_Quaternion,theQEnd : gp_Quaternion,theT : float) -> gp_Quaternion: """ Compute interpolated quaternion between two quaternions. """ @overload def __init__(self) -> None: ... @overload def __init__(self,theQStart : gp_Quaternion,theQEnd : gp_Quaternion) -> None: ... pass class gp_Sphere(): """ Describes a sphere. A sphere is defined by its radius and positioned in space with a coordinate system (a gp_Ax3 object). The origin of the coordinate system is the center of the sphere. This coordinate system is the "local coordinate system" of the sphere. Note: when a gp_Sphere sphere is converted into a Geom_SphericalSurface sphere, some implicit properties of its local coordinate system are used explicitly: - its origin, "X Direction", "Y Direction" and "main Direction" are used directly to define the parametric directions on the sphere and the origin of the parameters, - its implicit orientation (right-handed or left-handed) gives the orientation (direct, indirect) to the Geom_SphericalSurface sphere. See Also gce_MakeSphere which provides functions for more complex sphere constructions Geom_SphericalSurface which provides additional functions for constructing spheres and works, in particular, with the parametric equations of spheres. """ def Area(self) -> float: """ Computes the area of the sphere. """ def Coefficients(self) -> tuple[float, float, float, float, float, float, float, float, float, float]: """ Computes the coefficients of the implicit equation of the quadric in the absolute cartesian coordinates system : """ def Direct(self) -> bool: """ Returns true if the local coordinate system of this sphere is right-handed. """ def Location(self) -> gp_Pnt: """ --- Purpose ; Returns the center of the sphere. """ @overload def Mirror(self,theP : gp_Pnt) -> None: """ None None None """ @overload def Mirror(self,theA2 : gp_Ax2) -> None: ... @overload def Mirror(self,theA1 : gp_Ax1) -> None: ... @overload def Mirrored(self,theP : gp_Pnt) -> gp_Sphere: """ Performs the symmetrical transformation of a sphere with respect to the point theP which is the center of the symmetry. Performs the symmetrical transformation of a sphere with respect to an axis placement which is the axis of the symmetry. Performs the symmetrical transformation of a sphere with respect to a plane. The axis placement theA2 locates the plane of the of the symmetry : (Location, XDirection, YDirection). """ @overload def Mirrored(self,theA2 : gp_Ax2) -> gp_Sphere: ... @overload def Mirrored(self,theA1 : gp_Ax1) -> gp_Sphere: ... def Position(self) -> gp_Ax3: """ Returns the local coordinates system of the sphere. """ def Radius(self) -> float: """ Returns the radius of the sphere. """ def Rotate(self,theA1 : gp_Ax1,theAng : float) -> None: """ None """ def Rotated(self,theA1 : gp_Ax1,theAng : float) -> gp_Sphere: """ Rotates a sphere. theA1 is the axis of the rotation. theAng is the angular value of the rotation in radians. """ def Scale(self,theP : gp_Pnt,theS : float) -> None: """ None None """ def Scaled(self,theP : gp_Pnt,theS : float) -> gp_Sphere: """ Scales a sphere. theS is the scaling value. The absolute value of S is used to scale the sphere Scales a sphere. theS is the scaling value. The absolute value of S is used to scale the sphere """ def SetLocation(self,theLoc : gp_Pnt) -> None: """ Changes the center of the sphere. """ def SetPosition(self,theA3 : gp_Ax3) -> None: """ Changes the local coordinate system of the sphere. """ def SetRadius(self,theR : float) -> None: """ Assigns theR the radius of the Sphere. Warnings : It is not forbidden to create a sphere with null radius. Raises ConstructionError if theR < 0.0 """ def Transform(self,theT : gp_Trsf) -> None: """ None None """ def Transformed(self,theT : gp_Trsf) -> gp_Sphere: """ Transforms a sphere with the transformation theT from class Trsf. Transforms a sphere with the transformation theT from class Trsf. """ @overload def Translate(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> None: """ None None """ @overload def Translate(self,theV : gp_Vec) -> None: ... @overload def Translated(self,theV : gp_Vec) -> gp_Sphere: """ Translates a sphere in the direction of the vector theV. The magnitude of the translation is the vector's magnitude. Translates a sphere from the point theP1 to the point theP2. """ @overload def Translated(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> gp_Sphere: ... def UReverse(self) -> None: """ Reverses the U parametrization of the sphere reversing the YAxis. """ def VReverse(self) -> None: """ Reverses the V parametrization of the sphere reversing the ZAxis. """ def Volume(self) -> float: """ Computes the volume of the sphere """ def XAxis(self) -> gp_Ax1: """ Returns the axis X of the sphere. """ def YAxis(self) -> gp_Ax1: """ Returns the axis Y of the sphere. """ @overload def __init__(self,theA3 : gp_Ax3,theRadius : float) -> None: ... @overload def __init__(self) -> None: ... pass class gp_Torus(): """ Describes a torus. A torus is defined by its major and minor radii and positioned in space with a coordinate system (a gp_Ax3 object) as follows: - The origin of the coordinate system is the center of the torus; - The surface is obtained by rotating a circle of radius equal to the minor radius of the torus about the "main Direction" of the coordinate system. This circle is located in the plane defined by the origin, the "X Direction" and the "main Direction" of the coordinate system. It is centered on the "X Axis" of this coordinate system, and located at a distance, from the origin of this coordinate system, equal to the major radius of the torus; - The "X Direction" and "Y Direction" define the reference plane of the torus. The coordinate system described above is the "local coordinate system" of the torus. Note: when a gp_Torus torus is converted into a Geom_ToroidalSurface torus, some implicit properties of its local coordinate system are used explicitly: - its origin, "X Direction", "Y Direction" and "main Direction" are used directly to define the parametric directions on the torus and the origin of the parameters, - its implicit orientation (right-handed or left-handed) gives the orientation (direct, indirect) to the Geom_ToroidalSurface torus. See Also gce_MakeTorus which provides functions for more complex torus constructions Geom_ToroidalSurface which provides additional functions for constructing tori and works, in particular, with the parametric equations of tori. """ def Area(self) -> float: """ Computes the area of the torus. """ def Axis(self) -> gp_Ax1: """ returns the symmetry axis of the torus. """ def Coefficients(self,theCoef : OCP.TColStd.TColStd_Array1OfReal) -> None: """ Computes the coefficients of the implicit equation of the surface in the absolute Cartesian coordinate system: Raises DimensionError if the length of theCoef is lower than 35. """ def Direct(self) -> bool: """ returns true if the Ax3, the local coordinate system of this torus, is right handed. """ def Location(self) -> gp_Pnt: """ Returns the Torus's location. """ def MajorRadius(self) -> float: """ returns the major radius of the torus. """ def MinorRadius(self) -> float: """ returns the minor radius of the torus. """ @overload def Mirror(self,theP : gp_Pnt) -> None: """ None None None """ @overload def Mirror(self,theA1 : gp_Ax1) -> None: ... @overload def Mirror(self,theA2 : gp_Ax2) -> None: ... @overload def Mirrored(self,theA1 : gp_Ax1) -> gp_Torus: """ Performs the symmetrical transformation of a torus with respect to the point theP which is the center of the symmetry. Performs the symmetrical transformation of a torus with respect to an axis placement which is the axis of the symmetry. Performs the symmetrical transformation of a torus with respect to a plane. The axis placement theA2 locates the plane of the of the symmetry : (Location, XDirection, YDirection). """ @overload def Mirrored(self,theP : gp_Pnt) -> gp_Torus: ... @overload def Mirrored(self,theA2 : gp_Ax2) -> gp_Torus: ... def Position(self) -> gp_Ax3: """ Returns the local coordinates system of the torus. """ def Rotate(self,theA1 : gp_Ax1,theAng : float) -> None: """ None """ def Rotated(self,theA1 : gp_Ax1,theAng : float) -> gp_Torus: """ Rotates a torus. theA1 is the axis of the rotation. theAng is the angular value of the rotation in radians. """ def Scale(self,theP : gp_Pnt,theS : float) -> None: """ None None """ def Scaled(self,theP : gp_Pnt,theS : float) -> gp_Torus: """ Scales a torus. S is the scaling value. The absolute value of S is used to scale the torus Scales a torus. S is the scaling value. The absolute value of S is used to scale the torus """ def SetAxis(self,theA1 : gp_Ax1) -> None: """ Modifies this torus, by redefining its local coordinate system so that: - its origin and "main Direction" become those of the axis theA1 (the "X Direction" and "Y Direction" are then recomputed). Raises ConstructionError if the direction of theA1 is parallel to the "XDirection" of the coordinate system of the toroidal surface. """ def SetLocation(self,theLoc : gp_Pnt) -> None: """ Changes the location of the torus. """ def SetMajorRadius(self,theMajorRadius : float) -> None: """ Assigns value to the major radius of this torus. Raises ConstructionError if theMajorRadius - MinorRadius <= Resolution() """ def SetMinorRadius(self,theMinorRadius : float) -> None: """ Assigns value to the minor radius of this torus. Raises ConstructionError if theMinorRadius < 0.0 or if MajorRadius - theMinorRadius <= Resolution from gp. """ def SetPosition(self,theA3 : gp_Ax3) -> None: """ Changes the local coordinate system of the surface. """ def Transform(self,theT : gp_Trsf) -> None: """ None None """ def Transformed(self,theT : gp_Trsf) -> gp_Torus: """ Transforms a torus with the transformation theT from class Trsf. Transforms a torus with the transformation theT from class Trsf. """ @overload def Translate(self,theV : gp_Vec) -> None: """ None None """ @overload def Translate(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> None: ... @overload def Translated(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> gp_Torus: """ Translates a torus in the direction of the vector theV. The magnitude of the translation is the vector's magnitude. Translates a torus from the point theP1 to the point theP2. """ @overload def Translated(self,theV : gp_Vec) -> gp_Torus: ... def UReverse(self) -> None: """ Reverses the U parametrization of the torus reversing the YAxis. """ def VReverse(self) -> None: """ Reverses the V parametrization of the torus reversing the ZAxis. """ def Volume(self) -> float: """ Computes the volume of the torus. """ def XAxis(self) -> gp_Ax1: """ returns the axis X of the torus. """ def YAxis(self) -> gp_Ax1: """ returns the axis Y of the torus. """ @overload def __init__(self,theA3 : gp_Ax3,theMajorRadius : float,theMinorRadius : float) -> None: ... @overload def __init__(self) -> None: ... pass class gp_Trsf(): """ Defines a non-persistent transformation in 3D space. The following transformations are implemented : . Translation, Rotation, Scale . Symmetry with respect to a point, a line, a plane. Complex transformations can be obtained by combining the previous elementary transformations using the method Multiply. The transformations can be represented as follow : where {V1, V2, V3} defines the vectorial part of the transformation and T defines the translation part of the transformation. This transformation never change the nature of the objects. """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def Form(self) -> gp_TrsfForm: """ Returns the nature of the transformation. It can be: an identity transformation, a rotation, a translation, a mirror transformation (relative to a point, an axis or a plane), a scaling transformation, or a compound transformation. """ @overload def GetRotation(self) -> gp_Quaternion: """ Returns the boolean True if there is non-zero rotation. In the presence of rotation, the output parameters store the axis and the angle of rotation. The method always returns positive value "theAngle", i.e., 0. < theAngle <= PI. Note that this rotation is defined only by the vectorial part of the transformation; generally you would need to check also the translational part to obtain the axis (gp_Ax1) of rotation. Returns quaternion representing rotational part of the transformation. """ @overload def GetRotation(self,theAxis : gp_XYZ,theAngle : float) -> bool: ... def HVectorialPart(self) -> gp_Mat: """ Computes the homogeneous vectorial part of the transformation. It is a 3*3 matrix which doesn't include the scale factor. In other words, the vectorial part of this transformation is equal to its homogeneous vectorial part, multiplied by the scale factor. The coefficients of this matrix must be multiplied by the scale factor to obtain the coefficients of the transformation. """ def InitFromJson(self,theSStream : Any,theStreamPos : int) -> bool: """ Inits the content of me from the stream """ def Invert(self) -> None: """ None """ def Inverted(self) -> gp_Trsf: """ Computes the reverse transformation Raises an exception if the matrix of the transformation is not inversible, it means that the scale factor is lower or equal to Resolution from package gp. Computes the transformation composed with T and . In a C++ implementation you can also write Tcomposed = * T. Example : """ def IsNegative(self) -> bool: """ Returns true if the determinant of the vectorial part of this transformation is negative. """ def Multiplied(self,theT : gp_Trsf) -> gp_Trsf: """ None """ def Multiply(self,theT : gp_Trsf) -> None: """ Computes the transformation composed with and theT. = * theT """ def Power(self,theN : int) -> None: """ None """ def Powered(self,theN : int) -> gp_Trsf: """ Computes the following composition of transformations * * .......* , theN time. if theN = 0 = Identity if theN < 0 = .Inverse() *...........* .Inverse(). """ def PreMultiply(self,theT : gp_Trsf) -> None: """ Computes the transformation composed with and T. = theT * """ def ScaleFactor(self) -> float: """ Returns the scale factor. """ def SetDisplacement(self,theFromSystem1 : gp_Ax3,theToSystem2 : gp_Ax3) -> None: """ Modifies this transformation so that it transforms the coordinate system defined by theFromSystem1 into the one defined by theToSystem2. After this modification, this transformation transforms: - the origin of theFromSystem1 into the origin of theToSystem2, - the "X Direction" of theFromSystem1 into the "X Direction" of theToSystem2, - the "Y Direction" of theFromSystem1 into the "Y Direction" of theToSystem2, and - the "main Direction" of theFromSystem1 into the "main Direction" of theToSystem2. Warning When you know the coordinates of a point in one coordinate system and you want to express these coordinates in another one, do not use the transformation resulting from this function. Use the transformation that results from SetTransformation instead. SetDisplacement and SetTransformation create related transformations: the vectorial part of one is the inverse of the vectorial part of the other. """ def SetForm(self,theP : gp_TrsfForm) -> None: """ None """ @overload def SetMirror(self,theP : gp_Pnt) -> None: """ Makes the transformation into a symmetrical transformation. theP is the center of the symmetry. Makes the transformation into a symmetrical transformation. theA1 is the center of the axial symmetry. Makes the transformation into a symmetrical transformation. theA2 is the center of the planar symmetry and defines the plane of symmetry by its origin, "X Direction" and "Y Direction". Makes the transformation into a symmetrical transformation. theP is the center of the symmetry. """ @overload def SetMirror(self,theA1 : gp_Ax1) -> None: ... @overload def SetMirror(self,theA2 : gp_Ax2) -> None: ... @overload def SetRotation(self,theR : gp_Quaternion) -> None: """ Changes the transformation into a rotation. theA1 is the rotation axis and theAng is the angular value of the rotation in radians. Changes the transformation into a rotation defined by quaternion. Note that rotation is performed around origin, i.e. no translation is involved. """ @overload def SetRotation(self,theA1 : gp_Ax1,theAng : float) -> None: ... def SetRotationPart(self,theR : gp_Quaternion) -> None: """ Replaces the rotation part with specified quaternion. """ def SetScale(self,theP : gp_Pnt,theS : float) -> None: """ Changes the transformation into a scale. theP is the center of the scale and theS is the scaling value. Raises ConstructionError If is null. """ def SetScaleFactor(self,theS : float) -> None: """ Modifies the scale factor. Raises ConstructionError If theS is null. """ @overload def SetTransformation(self,theToSystem : gp_Ax3) -> None: """ Modifies this transformation so that it transforms the coordinates of any point, (x, y, z), relative to a source coordinate system into the coordinates (x', y', z') which are relative to a target coordinate system, but which represent the same point The transformation is from the coordinate system "theFromSystem1" to the coordinate system "theToSystem2". Example : Modifies this transformation so that it transforms the coordinates of any point, (x, y, z), relative to a source coordinate system into the coordinates (x', y', z') which are relative to a target coordinate system, but which represent the same point The transformation is from the default coordinate system to the local coordinate system defined with the Ax3 theToSystem. Use in the same way as the previous method. FromSystem1 is defaulted to the absolute coordinate system. Sets transformation by directly specified rotation and translation. """ @overload def SetTransformation(self,R : gp_Quaternion,theT : gp_Vec) -> None: ... @overload def SetTransformation(self,theFromSystem1 : gp_Ax3,theToSystem2 : gp_Ax3) -> None: ... @overload def SetTranslation(self,theV : gp_Vec) -> None: """ Changes the transformation into a translation. theV is the vector of the translation. Makes the transformation into a translation where the translation vector is the vector (theP1, theP2) defined from point theP1 to point theP2. Changes the transformation into a translation. theV is the vector of the translation. Makes the transformation into a translation where the translation vector is the vector (theP1, theP2) defined from point theP1 to point theP2. """ @overload def SetTranslation(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> None: ... def SetTranslationPart(self,theV : gp_Vec) -> None: """ Replaces the translation vector with the vector theV. """ def SetValues(self,a11 : float,a12 : float,a13 : float,a14 : float,a21 : float,a22 : float,a23 : float,a24 : float,a31 : float,a32 : float,a33 : float,a34 : float) -> None: """ Sets the coefficients of the transformation. The transformation of the point x,y,z is the point x',y',z' with : The method Value(i,j) will return aij. Raises ConstructionError if the determinant of the aij is null. The matrix is orthogonalized before future using. """ @overload def Transforms(self,theCoord : gp_XYZ) -> None: """ Transformation of a triplet XYZ with a Trsf Transformation of a triplet XYZ with a Trsf None None """ @overload def Transforms(self) -> tuple[float, float, float]: ... def TranslationPart(self) -> gp_XYZ: """ Returns the translation part of the transformation's matrix """ def Value(self,theRow : int,theCol : int) -> float: """ Returns the coefficients of the transformation's matrix. It is a 3 rows * 4 columns matrix. This coefficient includes the scale factor. Raises OutOfRanged if theRow < 1 or theRow > 3 or theCol < 1 or theCol > 4 Returns the coefficients of the transformation's matrix. It is a 3 rows * 4 columns matrix. This coefficient includes the scale factor. Raises OutOfRanged if theRow < 1 or theRow > 3 or theCol < 1 or theCol > 4 """ def VectorialPart(self) -> gp_Mat: """ Returns the vectorial part of the transformation. It is a 3*3 matrix which includes the scale factor. """ def __imul__(self,theT : gp_Trsf) -> None: """ None """ @overload def __init__(self,theT : gp_Trsf2d) -> None: ... @overload def __init__(self) -> None: ... def __mul__(self,theT : gp_Trsf) -> gp_Trsf: """ None """ def __rmul__(self,theT : gp_Trsf) -> gp_Trsf: """ None """ pass class gp_Trsf2d(): """ Defines a non-persistent transformation in 2D space. The following transformations are implemented : - Translation, Rotation, Scale - Symmetry with respect to a point and a line. Complex transformations can be obtained by combining the previous elementary transformations using the method Multiply. The transformations can be represented as follow : where {V1, V2} defines the vectorial part of the transformation and T defines the translation part of the transformation. This transformation never change the nature of the objects. """ def Form(self) -> gp_TrsfForm: """ Returns the nature of the transformation. It can be an identity transformation, a rotation, a translation, a mirror (relative to a point or an axis), a scaling transformation, or a compound transformation. """ def HVectorialPart(self) -> gp_Mat2d: """ Returns the homogeneous vectorial part of the transformation. It is a 2*2 matrix which doesn't include the scale factor. The coefficients of this matrix must be multiplied by the scale factor to obtain the coefficients of the transformation. """ def Invert(self) -> None: """ None """ def Inverted(self) -> gp_Trsf2d: """ Computes the reverse transformation. Raises an exception if the matrix of the transformation is not inversible, it means that the scale factor is lower or equal to Resolution from package gp. """ def IsNegative(self) -> bool: """ Returns true if the determinant of the vectorial part of this transformation is negative.. """ def Multiplied(self,theT : gp_Trsf2d) -> gp_Trsf2d: """ None """ def Multiply(self,theT : gp_Trsf2d) -> None: """ Computes the transformation composed from and theT. = * theT """ def Power(self,theN : int) -> None: """ None """ def Powered(self,theN : int) -> gp_Trsf2d: """ Computes the following composition of transformations * * .......* , theN time. if theN = 0 = Identity if theN < 0 = .Inverse() *...........* .Inverse(). """ def PreMultiply(self,theT : gp_Trsf2d) -> None: """ Computes the transformation composed from and theT. = theT * """ def RotationPart(self) -> float: """ Returns the angle corresponding to the rotational component of the transformation matrix (operation opposite to SetRotation()). """ def ScaleFactor(self) -> float: """ Returns the scale factor. """ @overload def SetMirror(self,theP : gp_Pnt2d) -> None: """ Changes the transformation into a symmetrical transformation. theP is the center of the symmetry. Changes the transformation into a symmetrical transformation. theA is the center of the axial symmetry. Changes the transformation into a symmetrical transformation. theP is the center of the symmetry. """ @overload def SetMirror(self,theA : gp_Ax2d) -> None: ... def SetRotation(self,theP : gp_Pnt2d,theAng : float) -> None: """ Changes the transformation into a rotation. theP is the rotation's center and theAng is the angular value of the rotation in radian. Changes the transformation into a rotation. theP is the rotation's center and theAng is the angular value of the rotation in radian. """ def SetScale(self,theP : gp_Pnt2d,theS : float) -> None: """ Changes the transformation into a scale. theP is the center of the scale and theS is the scaling value. Changes the transformation into a scale. theP is the center of the scale and theS is the scaling value. """ def SetScaleFactor(self,theS : float) -> None: """ Modifies the scale factor. """ @overload def SetTransformation(self,theFromSystem1 : gp_Ax2d,theToSystem2 : gp_Ax2d) -> None: """ Changes a transformation allowing passage from the coordinate system "theFromSystem1" to the coordinate system "theToSystem2". Changes the transformation allowing passage from the basic coordinate system {P(0.,0.,0.), VX (1.,0.,0.), VY (0.,1.,0.)} to the local coordinate system defined with the Ax2d theToSystem. """ @overload def SetTransformation(self,theToSystem : gp_Ax2d) -> None: ... @overload def SetTranslation(self,theP1 : gp_Pnt2d,theP2 : gp_Pnt2d) -> None: """ Changes the transformation into a translation. theV is the vector of the translation. Makes the transformation into a translation from the point theP1 to the point theP2. Changes the transformation into a translation. theV is the vector of the translation. Makes the transformation into a translation from the point theP1 to the point theP2. """ @overload def SetTranslation(self,theV : gp_Vec2d) -> None: ... def SetTranslationPart(self,theV : gp_Vec2d) -> None: """ Replaces the translation vector with theV. """ def SetValues(self,a11 : float,a12 : float,a13 : float,a21 : float,a22 : float,a23 : float) -> None: """ Sets the coefficients of the transformation. The transformation of the point x,y is the point x',y' with : The method Value(i,j) will return aij. Raises ConstructionError if the determinant of the aij is null. If the matrix as not a uniform scale it will be orthogonalized before future using. """ @overload def Transforms(self) -> tuple[float, float]: """ Transforms a doublet XY with a Trsf2d Transforms a doublet XY with a Trsf2d None None """ @overload def Transforms(self,theCoord : gp_XY) -> None: ... def TranslationPart(self) -> gp_XY: """ Returns the translation part of the transformation's matrix """ def Value(self,theRow : int,theCol : int) -> float: """ Returns the coefficients of the transformation's matrix. It is a 2 rows * 3 columns matrix. Raises OutOfRange if theRow < 1 or theRow > 2 or theCol < 1 or theCol > 3 Returns the coefficients of the transformation's matrix. It is a 2 rows * 3 columns matrix. Raises OutOfRange if theRow < 1 or theRow > 2 or theCol < 1 or theCol > 3 """ def VectorialPart(self) -> gp_Mat2d: """ Returns the vectorial part of the transformation. It is a 2*2 matrix which includes the scale factor. """ def __imul__(self,theT : gp_Trsf2d) -> None: """ None """ @overload def __init__(self) -> None: ... @overload def __init__(self,theT : gp_Trsf) -> None: ... def __mul__(self,theT : gp_Trsf2d) -> gp_Trsf2d: """ None """ def __rmul__(self,theT : gp_Trsf2d) -> gp_Trsf2d: """ None """ pass class gp_TrsfForm(): """ Identifies the type of a geometric transformation. Members: gp_Identity gp_Rotation gp_Translation gp_PntMirror gp_Ax1Mirror gp_Ax2Mirror gp_Scale gp_CompoundTrsf gp_Other """ def __eq__(self,other : object) -> bool: ... def __getstate__(self) -> int: ... def __hash__(self) -> int: ... def __index__(self) -> int: ... def __init__(self,value : int) -> None: ... def __int__(self) -> int: ... def __ne__(self,other : object) -> bool: ... def __repr__(self) -> str: ... def __setstate__(self,state : int) -> None: ... def __str__(self) -> str: ... @property def name(self) -> None: """ :type: None """ @property def value(self) -> int: """ :type: int """ __entries: dict # value = {'gp_Identity': (, None), 'gp_Rotation': (, None), 'gp_Translation': (, None), 'gp_PntMirror': (, None), 'gp_Ax1Mirror': (, None), 'gp_Ax2Mirror': (, None), 'gp_Scale': (, None), 'gp_CompoundTrsf': (, None), 'gp_Other': (, None)} __members__: dict # value = {'gp_Identity': , 'gp_Rotation': , 'gp_Translation': , 'gp_PntMirror': , 'gp_Ax1Mirror': , 'gp_Ax2Mirror': , 'gp_Scale': , 'gp_CompoundTrsf': , 'gp_Other': } gp_Ax1Mirror: OCP.gp.gp_TrsfForm # value = gp_Ax2Mirror: OCP.gp.gp_TrsfForm # value = gp_CompoundTrsf: OCP.gp.gp_TrsfForm # value = gp_Identity: OCP.gp.gp_TrsfForm # value = gp_Other: OCP.gp.gp_TrsfForm # value = gp_PntMirror: OCP.gp.gp_TrsfForm # value = gp_Rotation: OCP.gp.gp_TrsfForm # value = gp_Scale: OCP.gp.gp_TrsfForm # value = gp_Translation: OCP.gp.gp_TrsfForm # value = pass class gp_Vec(): """ Defines a non-persistent vector in 3D space. """ def Add(self,theOther : gp_Vec) -> None: """ Adds two vectors """ def Added(self,theOther : gp_Vec) -> gp_Vec: """ Adds two vectors """ def Angle(self,theOther : gp_Vec) -> float: """ Computes the angular value between and Returns the angle value between 0 and PI in radian. Raises VectorWithNullMagnitude if .Magnitude() <= Resolution from gp or theOther.Magnitude() <= Resolution because the angular value is indefinite if one of the vectors has a null magnitude. Computes the angular value between and Returns the angle value between 0 and PI in radian. Raises VectorWithNullMagnitude if .Magnitude() <= Resolution from gp or theOther.Magnitude() <= Resolution because the angular value is indefinite if one of the vectors has a null magnitude. """ def AngleWithRef(self,theOther : gp_Vec,theVRef : gp_Vec) -> float: """ Computes the angle, in radians, between this vector and vector theOther. The result is a value between -Pi and Pi. For this, theVRef defines the positive sense of rotation: the angular value is positive, if the cross product this ^ theOther has the same orientation as theVRef relative to the plane defined by the vectors this and theOther. Otherwise, the angular value is negative. Exceptions gp_VectorWithNullMagnitude if the magnitude of this vector, the vector theOther, or the vector theVRef is less than or equal to gp::Resolution(). Standard_DomainError if this vector, the vector theOther, and the vector theVRef are coplanar, unless this vector and the vector theOther are parallel. Computes the angle, in radians, between this vector and vector theOther. The result is a value between -Pi and Pi. For this, theVRef defines the positive sense of rotation: the angular value is positive, if the cross product this ^ theOther has the same orientation as theVRef relative to the plane defined by the vectors this and theOther. Otherwise, the angular value is negative. Exceptions gp_VectorWithNullMagnitude if the magnitude of this vector, the vector theOther, or the vector theVRef is less than or equal to gp::Resolution(). Standard_DomainError if this vector, the vector theOther, and the vector theVRef are coplanar, unless this vector and the vector theOther are parallel. """ @overload def Coord(self) -> tuple[float, float, float]: """ Returns the coordinate of range theIndex : theIndex = 1 => X is returned theIndex = 2 => Y is returned theIndex = 3 => Z is returned Raised if theIndex != {1, 2, 3}. For this vector returns its three coordinates theXv, theYv, and theZv inline """ @overload def Coord(self,theIndex : int) -> float: ... def Cross(self,theRight : gp_Vec) -> None: """ computes the cross product between two vectors """ def CrossCross(self,theV1 : gp_Vec,theV2 : gp_Vec) -> None: """ Computes the triple vector product. ^= (theV1 ^ theV2) """ def CrossCrossed(self,theV1 : gp_Vec,theV2 : gp_Vec) -> gp_Vec: """ Computes the triple vector product. ^ (theV1 ^ theV2) """ def CrossMagnitude(self,theRight : gp_Vec) -> float: """ Computes the magnitude of the cross product between and theRight. Returns || ^ theRight || """ def CrossSquareMagnitude(self,theRight : gp_Vec) -> float: """ Computes the square magnitude of the cross product between and theRight. Returns || ^ theRight ||**2 """ def Crossed(self,theRight : gp_Vec) -> gp_Vec: """ computes the cross product between two vectors """ def Divide(self,theScalar : float) -> None: """ Divides a vector by a scalar """ def Divided(self,theScalar : float) -> gp_Vec: """ Divides a vector by a scalar """ def Dot(self,theOther : gp_Vec) -> float: """ computes the scalar product """ def DotCross(self,theV1 : gp_Vec,theV2 : gp_Vec) -> float: """ Computes the triple scalar product * (theV1 ^ theV2). """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def IsEqual(self,theOther : gp_Vec,theLinearTolerance : float,theAngularTolerance : float) -> bool: """ Returns True if the two vectors have the same magnitude value and the same direction. The precision values are theLinearTolerance for the magnitude and theAngularTolerance for the direction. """ def IsNormal(self,theOther : gp_Vec,theAngularTolerance : float) -> bool: """ Returns True if abs(.Angle(theOther) - PI/2.) <= theAngularTolerance Raises VectorWithNullMagnitude if .Magnitude() <= Resolution or theOther.Magnitude() <= Resolution from gp Returns True if abs(.Angle(theOther) - PI/2.) <= theAngularTolerance Raises VectorWithNullMagnitude if .Magnitude() <= Resolution or theOther.Magnitude() <= Resolution from gp """ def IsOpposite(self,theOther : gp_Vec,theAngularTolerance : float) -> bool: """ Returns True if PI - .Angle(theOther) <= theAngularTolerance Raises VectorWithNullMagnitude if .Magnitude() <= Resolution or Other.Magnitude() <= Resolution from gp """ def IsParallel(self,theOther : gp_Vec,theAngularTolerance : float) -> bool: """ Returns True if Angle(, theOther) <= theAngularTolerance or PI - Angle(, theOther) <= theAngularTolerance This definition means that two parallel vectors cannot define a plane but two vectors with opposite directions are considered as parallel. Raises VectorWithNullMagnitude if .Magnitude() <= Resolution or Other.Magnitude() <= Resolution from gp """ def Magnitude(self) -> float: """ Computes the magnitude of this vector. """ @overload def Mirror(self,theA1 : gp_Ax1) -> None: """ None None None """ @overload def Mirror(self,theV : gp_Vec) -> None: ... @overload def Mirror(self,theA2 : gp_Ax2) -> None: ... @overload def Mirrored(self,theV : gp_Vec) -> gp_Vec: """ Performs the symmetrical transformation of a vector with respect to the vector theV which is the center of the symmetry. Performs the symmetrical transformation of a vector with respect to an axis placement which is the axis of the symmetry. Performs the symmetrical transformation of a vector with respect to a plane. The axis placement theA2 locates the plane of the symmetry : (Location, XDirection, YDirection). """ @overload def Mirrored(self,theA2 : gp_Ax2) -> gp_Vec: ... @overload def Mirrored(self,theA1 : gp_Ax1) -> gp_Vec: ... def Multiplied(self,theScalar : float) -> gp_Vec: """ Multiplies a vector by a scalar """ def Multiply(self,theScalar : float) -> None: """ Multiplies a vector by a scalar """ def Normalize(self) -> None: """ normalizes a vector Raises an exception if the magnitude of the vector is lower or equal to Resolution from gp. """ def Normalized(self) -> gp_Vec: """ normalizes a vector Raises an exception if the magnitude of the vector is lower or equal to Resolution from gp. normalizes a vector Raises an exception if the magnitude of the vector is lower or equal to Resolution from gp. """ def Reverse(self) -> None: """ Reverses the direction of a vector """ def Reversed(self) -> gp_Vec: """ Reverses the direction of a vector """ def Rotate(self,theA1 : gp_Ax1,theAng : float) -> None: """ None None """ def Rotated(self,theA1 : gp_Ax1,theAng : float) -> gp_Vec: """ Rotates a vector. theA1 is the axis of the rotation. theAng is the angular value of the rotation in radians. """ def Scale(self,theS : float) -> None: """ None """ def Scaled(self,theS : float) -> gp_Vec: """ Scales a vector. theS is the scaling value. """ @overload def SetCoord(self,theIndex : int,theXi : float) -> None: """ Changes the coordinate of range theIndex theIndex = 1 => X is modified theIndex = 2 => Y is modified theIndex = 3 => Z is modified Raised if theIndex != {1, 2, 3}. For this vector, assigns - the values theXv, theYv and theZv to its three coordinates. """ @overload def SetCoord(self,theXv : float,theYv : float,theZv : float) -> None: ... @overload def SetLinearForm(self,theV1 : gp_Vec,theV2 : gp_Vec) -> None: """ is set to the following linear form : theA1 * theV1 + theA2 * theV2 + theA3 * theV3 + theV4 is set to the following linear form : theA1 * theV1 + theA2 * theV2 + theA3 * theV3 is set to the following linear form : theA1 * theV1 + theA2 * theV2 + theV3 is set to the following linear form : theA1 * theV1 + theA2 * theV2 is set to the following linear form : theA1 * theV1 + theV2 is set to the following linear form : theV1 + theV2 """ @overload def SetLinearForm(self,theA1 : float,theV1 : gp_Vec,theA2 : float,theV2 : gp_Vec,theA3 : float,theV3 : gp_Vec,theV4 : gp_Vec) -> None: ... @overload def SetLinearForm(self,theA1 : float,theV1 : gp_Vec,theV2 : gp_Vec) -> None: ... @overload def SetLinearForm(self,theA1 : float,theV1 : gp_Vec,theA2 : float,theV2 : gp_Vec,theA3 : float,theV3 : gp_Vec) -> None: ... @overload def SetLinearForm(self,theA1 : float,theV1 : gp_Vec,theA2 : float,theV2 : gp_Vec) -> None: ... @overload def SetLinearForm(self,theA1 : float,theV1 : gp_Vec,theA2 : float,theV2 : gp_Vec,theV3 : gp_Vec) -> None: ... def SetX(self,theX : float) -> None: """ Assigns the given value to the X coordinate of this vector. """ def SetXYZ(self,theCoord : gp_XYZ) -> None: """ Assigns the three coordinates of theCoord to this vector. """ def SetY(self,theY : float) -> None: """ Assigns the given value to the X coordinate of this vector. """ def SetZ(self,theZ : float) -> None: """ Assigns the given value to the X coordinate of this vector. """ def SquareMagnitude(self) -> float: """ Computes the square magnitude of this vector. """ def Subtract(self,theRight : gp_Vec) -> None: """ Subtracts two vectors """ def Subtracted(self,theRight : gp_Vec) -> gp_Vec: """ Subtracts two vectors """ def Transform(self,theT : gp_Trsf) -> None: """ Transforms a vector with the transformation theT. """ def Transformed(self,theT : gp_Trsf) -> gp_Vec: """ Transforms a vector with the transformation theT. """ def X(self) -> float: """ For this vector, returns its X coordinate. """ def XYZ(self) -> gp_XYZ: """ For this vector, returns - its three coordinates as a number triple """ def Y(self) -> float: """ For this vector, returns its Y coordinate. """ def Z(self) -> float: """ For this vector, returns its Z coordinate. """ def __add__(self,theOther : gp_Vec) -> gp_Vec: """ None """ def __iadd__(self,theOther : gp_Vec) -> None: """ None """ def __imul__(self,theScalar : float) -> None: """ None """ @overload def __init__(self) -> None: ... @overload def __init__(self,theP1 : gp_Pnt,theP2 : gp_Pnt) -> None: ... @overload def __init__(self,theCoord : gp_XYZ) -> None: ... @overload def __init__(self,theXv : float,theYv : float,theZv : float) -> None: ... @overload def __init__(self,theV : gp_Dir) -> None: ... def __ipow__(self,theRight : gp_Vec) -> None: """ None """ def __isub__(self,theRight : gp_Vec) -> None: """ None """ def __itruediv__(self,theScalar : float) -> None: """ None """ @overload def __mul__(self,theOther : gp_Vec) -> float: """ None None """ @overload def __mul__(self,theScalar : float) -> gp_Vec: ... def __pow__(self,theRight : gp_Vec) -> gp_Vec: """ None """ @overload def __rmul__(self,theOther : gp_Vec) -> float: """ None None """ @overload def __rmul__(self,theScalar : float) -> gp_Vec: ... @overload def __sub__(self,theRight : gp_Vec) -> gp_Vec: """ None None """ @overload def __sub__(self) -> gp_Vec: ... def __truediv__(self,theScalar : float) -> gp_Vec: """ None """ pass class gp_Vec2d(): """ Defines a non-persistent vector in 2D space. """ def Add(self,theOther : gp_Vec2d) -> None: """ None """ def Added(self,theOther : gp_Vec2d) -> gp_Vec2d: """ Adds two vectors """ def Angle(self,theOther : gp_Vec2d) -> float: """ Computes the angular value between and returns the angle value between -PI and PI in radian. The orientation is from to theOther. The positive sense is the trigonometric sense. Raises VectorWithNullMagnitude if .Magnitude() <= Resolution from gp or theOther.Magnitude() <= Resolution because the angular value is indefinite if one of the vectors has a null magnitude. """ @overload def Coord(self) -> tuple[float, float]: """ Returns the coordinate of range theIndex : theIndex = 1 => X is returned theIndex = 2 => Y is returned Raised if theIndex != {1, 2}. For this vector, returns its two coordinates theXv and theYv """ @overload def Coord(self,theIndex : int) -> float: ... def CrossMagnitude(self,theRight : gp_Vec2d) -> float: """ Computes the magnitude of the cross product between and theRight. Returns || ^ theRight || """ def CrossSquareMagnitude(self,theRight : gp_Vec2d) -> float: """ Computes the square magnitude of the cross product between and theRight. Returns || ^ theRight ||**2 """ def Crossed(self,theRight : gp_Vec2d) -> float: """ Computes the crossing product between two vectors """ def Divide(self,theScalar : float) -> None: """ None """ def Divided(self,theScalar : float) -> gp_Vec2d: """ divides a vector by a scalar """ def Dot(self,theOther : gp_Vec2d) -> float: """ Computes the scalar product """ def GetNormal(self) -> gp_Vec2d: """ None """ def IsEqual(self,theOther : gp_Vec2d,theLinearTolerance : float,theAngularTolerance : float) -> bool: """ Returns True if the two vectors have the same magnitude value and the same direction. The precision values are theLinearTolerance for the magnitude and theAngularTolerance for the direction. """ def IsNormal(self,theOther : gp_Vec2d,theAngularTolerance : float) -> bool: """ Returns True if abs(Abs(.Angle(theOther)) - PI/2.) <= theAngularTolerance Raises VectorWithNullMagnitude if .Magnitude() <= Resolution or theOther.Magnitude() <= Resolution from gp. """ def IsOpposite(self,theOther : gp_Vec2d,theAngularTolerance : float) -> bool: """ Returns True if PI - Abs(.Angle(theOther)) <= theAngularTolerance Raises VectorWithNullMagnitude if .Magnitude() <= Resolution or theOther.Magnitude() <= Resolution from gp. Returns True if PI - Abs(.Angle(theOther)) <= theAngularTolerance Raises VectorWithNullMagnitude if .Magnitude() <= Resolution or theOther.Magnitude() <= Resolution from gp. """ def IsParallel(self,theOther : gp_Vec2d,theAngularTolerance : float) -> bool: """ Returns true if Abs(Angle(, theOther)) <= theAngularTolerance or PI - Abs(Angle(, theOther)) <= theAngularTolerance Two vectors with opposite directions are considered as parallel. Raises VectorWithNullMagnitude if .Magnitude() <= Resolution or theOther.Magnitude() <= Resolution from gp Returns true if Abs(Angle(, theOther)) <= theAngularTolerance or PI - Abs(Angle(, theOther)) <= theAngularTolerance Two vectors with opposite directions are considered as parallel. Raises VectorWithNullMagnitude if .Magnitude() <= Resolution or theOther.Magnitude() <= Resolution from gp """ def Magnitude(self) -> float: """ Computes the magnitude of this vector. """ @overload def Mirror(self,theA1 : gp_Ax2d) -> None: """ Performs the symmetrical transformation of a vector with respect to the vector theV which is the center of the symmetry. Performs the symmetrical transformation of a vector with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirror(self,theV : gp_Vec2d) -> None: ... @overload def Mirrored(self,theV : gp_Vec2d) -> gp_Vec2d: """ Performs the symmetrical transformation of a vector with respect to the vector theV which is the center of the symmetry. Performs the symmetrical transformation of a vector with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirrored(self,theA1 : gp_Ax2d) -> gp_Vec2d: ... def Multiplied(self,theScalar : float) -> gp_Vec2d: """ Normalizes a vector Raises an exception if the magnitude of the vector is lower or equal to Resolution from package gp. """ def Multiply(self,theScalar : float) -> None: """ None """ def Normalize(self) -> None: """ None """ def Normalized(self) -> gp_Vec2d: """ Normalizes a vector Raises an exception if the magnitude of the vector is lower or equal to Resolution from package gp. Reverses the direction of a vector Normalizes a vector Raises an exception if the magnitude of the vector is lower or equal to Resolution from package gp. Reverses the direction of a vector """ def Reverse(self) -> None: """ None """ def Reversed(self) -> gp_Vec2d: """ Reverses the direction of a vector """ def Rotate(self,theAng : float) -> None: """ None None """ def Rotated(self,theAng : float) -> gp_Vec2d: """ Rotates a vector. theAng is the angular value of the rotation in radians. """ def Scale(self,theS : float) -> None: """ None """ def Scaled(self,theS : float) -> gp_Vec2d: """ Scales a vector. theS is the scaling value. """ @overload def SetCoord(self,theIndex : int,theXi : float) -> None: """ Changes the coordinate of range theIndex theIndex = 1 => X is modified theIndex = 2 => Y is modified Raises OutOfRange if theIndex != {1, 2}. For this vector, assigns the values theXv and theYv to its two coordinates """ @overload def SetCoord(self,theXv : float,theYv : float) -> None: ... @overload def SetLinearForm(self,theA1 : float,theV1 : gp_Vec2d,theV2 : gp_Vec2d) -> None: """ is set to the following linear form : theA1 * theV1 + theA2 * theV2 + theV3 is set to the following linear form : theA1 * theV1 + theA2 * theV2 is set to the following linear form : theA1 * theV1 + theV2 is set to the following linear form : theV1 + theV2 """ @overload def SetLinearForm(self,theA1 : float,theV1 : gp_Vec2d,theA2 : float,theV2 : gp_Vec2d) -> None: ... @overload def SetLinearForm(self,theV1 : gp_Vec2d,theV2 : gp_Vec2d) -> None: ... @overload def SetLinearForm(self,theA1 : float,theV1 : gp_Vec2d,theA2 : float,theV2 : gp_Vec2d,theV3 : gp_Vec2d) -> None: ... def SetX(self,theX : float) -> None: """ Assigns the given value to the X coordinate of this vector. """ def SetXY(self,theCoord : gp_XY) -> None: """ Assigns the two coordinates of theCoord to this vector. """ def SetY(self,theY : float) -> None: """ Assigns the given value to the Y coordinate of this vector. """ def SquareMagnitude(self) -> float: """ Computes the square magnitude of this vector. """ def Subtract(self,theRight : gp_Vec2d) -> None: """ Subtracts two vectors """ def Subtracted(self,theRight : gp_Vec2d) -> gp_Vec2d: """ Subtracts two vectors """ def Transform(self,theT : gp_Trsf2d) -> None: """ None """ def Transformed(self,theT : gp_Trsf2d) -> gp_Vec2d: """ Transforms a vector with a Trsf from gp. """ def X(self) -> float: """ For this vector, returns its X coordinate. """ def XY(self) -> gp_XY: """ For this vector, returns its two coordinates as a number pair """ def Y(self) -> float: """ For this vector, returns its Y coordinate. """ def __add__(self,theOther : gp_Vec2d) -> gp_Vec2d: """ None """ def __iadd__(self,theOther : gp_Vec2d) -> None: """ None """ def __imul__(self,theScalar : float) -> None: """ None """ @overload def __init__(self,theP1 : gp_Pnt2d,theP2 : gp_Pnt2d) -> None: ... @overload def __init__(self) -> None: ... @overload def __init__(self,theCoord : gp_XY) -> None: ... @overload def __init__(self,theXv : float,theYv : float) -> None: ... @overload def __init__(self,theV : gp_Dir2d) -> None: ... def __isub__(self,theRight : gp_Vec2d) -> None: """ None """ def __itruediv__(self,theScalar : float) -> None: """ None """ @overload def __mul__(self,theOther : gp_Vec2d) -> float: """ None None """ @overload def __mul__(self,theScalar : float) -> gp_Vec2d: ... def __pow__(self,theRight : gp_Vec2d) -> float: """ None """ @overload def __rmul__(self,theScalar : float) -> gp_Vec2d: """ None None """ @overload def __rmul__(self,theOther : gp_Vec2d) -> float: ... @overload def __sub__(self) -> gp_Vec2d: """ None None """ @overload def __sub__(self,theRight : gp_Vec2d) -> gp_Vec2d: ... def __truediv__(self,theScalar : float) -> gp_Vec2d: """ None """ pass class gp_Vec2f(): """ Defines the 2D-vector template. The main target for this class - to handle raw low-level arrays (from/to graphic driver etc.). """ def ChangeData(self) -> float: """ None """ @staticmethod def DX_s() -> gp_Vec2f: """ Construct DX unit vector. """ @staticmethod def DY_s() -> gp_Vec2f: """ Construct DY unit vector. """ def Dot(self,theOther : gp_Vec2f) -> float: """ Computes the dot product. """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def GetData(self) -> float: """ Raw access to the data (for OpenGL exchange). """ def IsEqual(self,theOther : gp_Vec2f) -> bool: """ Check this vector with another vector for equality (without tolerance!). """ @staticmethod def Length_s() -> int: """ Returns the number of components. """ def Modulus(self) -> float: """ Computes the vector modulus (magnitude, length). """ def Multiplied(self,theFactor : float) -> gp_Vec2f: """ Compute per-component multiplication by scale factor. """ def Multiply(self,theFactor : float) -> None: """ Compute per-component multiplication by scale factor. """ def SetValues(self,theX : float,theY : float) -> None: """ Assign new values to the vector. """ def SquareModulus(self) -> float: """ Computes the square of vector modulus (magnitude, length). This method may be used for performance tricks. """ def __iadd__(self,theAdd : gp_Vec2f) -> gp_Vec2f: """ Compute per-component summary. """ @overload def __imul__(self,theFactor : float) -> gp_Vec2f: """ Compute per-component multiplication. Compute per-component multiplication by scale factor. """ @overload def __imul__(self,theRight : gp_Vec2f) -> gp_Vec2f: ... @overload def __init__(self,theXY : float) -> None: ... @overload def __init__(self,theX : float,theY : float) -> None: ... @overload def __init__(self) -> None: ... def __isub__(self,theDec : gp_Vec2f) -> gp_Vec2f: """ Compute per-component subtraction. """ @overload def __itruediv__(self,theInvFactor : float) -> gp_Vec2f: """ Compute per-component division by scale factor. Compute per-component division. """ @overload def __itruediv__(self,theRight : gp_Vec2f) -> gp_Vec2f: ... def __mul__(self,theFactor : float) -> gp_Vec2f: """ Compute per-component multiplication by scale factor. """ def __rmul__(self,theFactor : float) -> gp_Vec2f: """ Compute per-component multiplication by scale factor. """ def __sub__(self) -> gp_Vec2f: """ Unary -. """ def __truediv__(self,theInvFactor : float) -> gp_Vec2f: """ Compute per-component division by scale factor. """ def cwiseAbs(self) -> gp_Vec2f: """ Compute component-wise modulus of the vector. """ def cwiseMax(self,theVec : gp_Vec2f) -> gp_Vec2f: """ Compute component-wise maximum of two vectors. """ def cwiseMin(self,theVec : gp_Vec2f) -> gp_Vec2f: """ Compute component-wise minimum of two vectors. """ def maxComp(self) -> float: """ Compute maximum component of the vector. """ def minComp(self) -> float: """ Compute minimum component of the vector. """ def x(self) -> float: """ Alias to 1st component as X coordinate in XY. Alias to 1st component as X coordinate in XY. """ def xy(self) -> gp_Vec2f: """ None """ def y(self) -> float: """ Alias to 2nd component as Y coordinate in XY. Alias to 2nd component as Y coordinate in XY. """ def yx(self) -> gp_Vec2f: """ None """ pass class gp_Vec3f(): """ Generic 3-components vector. To be used as RGB color pixel or XYZ 3D-point. The main target for this class - to handle raw low-level arrays (from/to graphic driver etc.). """ def ChangeData(self) -> float: """ None """ @staticmethod def Cross_s(theVec1 : gp_Vec3f,theVec2 : gp_Vec3f) -> gp_Vec3f: """ Computes the cross product. """ @staticmethod def DX_s() -> gp_Vec3f: """ Construct DX unit vector. """ @staticmethod def DY_s() -> gp_Vec3f: """ Construct DY unit vector. """ @staticmethod def DZ_s() -> gp_Vec3f: """ Construct DZ unit vector. """ def Dot(self,theOther : gp_Vec3f) -> float: """ Computes the dot product. """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def GetData(self) -> float: """ Raw access to the data (for OpenGL exchange). """ @staticmethod def GetLERP_s(theFrom : gp_Vec3f,theTo : gp_Vec3f,theT : float) -> gp_Vec3f: """ Compute linear interpolation between to vectors. """ def IsEqual(self,theOther : gp_Vec3f) -> bool: """ Check this vector with another vector for equality (without tolerance!). """ @staticmethod def Length_s() -> int: """ Returns the number of components. """ def Modulus(self) -> float: """ Computes the vector modulus (magnitude, length). """ def Multiplied(self,theFactor : float) -> gp_Vec3f: """ Compute per-component multiplication by scale factor. """ def Multiply(self,theFactor : float) -> None: """ Compute per-component multiplication by scale factor. """ def Normalize(self) -> None: """ Normalize the vector. """ def Normalized(self) -> gp_Vec3f: """ Normalize the vector. """ @overload def SetValues(self,theVec2 : gp_Vec2f,theZ : float) -> None: """ Assign new values to the vector. Assign new values to the vector. """ @overload def SetValues(self,theX : float,theY : float,theZ : float) -> None: ... def SquareModulus(self) -> float: """ Computes the square of vector modulus (magnitude, length). This method may be used for performance tricks. """ def __iadd__(self,theAdd : gp_Vec3f) -> gp_Vec3f: """ Compute per-component summary. """ @overload def __imul__(self,theFactor : float) -> gp_Vec3f: """ Compute per-component multiplication. Compute per-component multiplication by scale factor. """ @overload def __imul__(self,theRight : gp_Vec3f) -> gp_Vec3f: ... @overload def __init__(self,theX : float,theY : float,theZ : float) -> None: ... @overload def __init__(self) -> None: ... @overload def __init__(self,theValue : float) -> None: ... @overload def __init__(self,theVec2 : gp_Vec2f,theZ : float=0.0) -> None: ... def __isub__(self,theDec : gp_Vec3f) -> gp_Vec3f: """ Compute per-component subtraction. """ @overload def __itruediv__(self,theRight : gp_Vec3f) -> gp_Vec3f: """ Compute per-component division by scale factor. Compute per-component division. """ @overload def __itruediv__(self,theInvFactor : float) -> gp_Vec3f: ... def __mul__(self,theFactor : float) -> gp_Vec3f: """ Compute per-component multiplication by scale factor. """ def __rmul__(self,theFactor : float) -> gp_Vec3f: """ Compute per-component multiplication by scale factor. """ def __sub__(self) -> gp_Vec3f: """ Unary -. """ def __truediv__(self,theInvFactor : float) -> gp_Vec3f: """ Compute per-component division by scale factor. """ def b(self) -> float: """ Alias to 3rd component as BLUE channel in RGB. Alias to 3rd component as BLUE channel in RGB. """ def cwiseAbs(self) -> gp_Vec3f: """ Compute component-wise modulus of the vector. """ def cwiseMax(self,theVec : gp_Vec3f) -> gp_Vec3f: """ Compute component-wise maximum of two vectors. """ def cwiseMin(self,theVec : gp_Vec3f) -> gp_Vec3f: """ Compute component-wise minimum of two vectors. """ def g(self) -> float: """ Alias to 2nd component as GREEN channel in RGB. Alias to 2nd component as GREEN channel in RGB. """ def maxComp(self) -> float: """ Compute maximum component of the vector. """ def minComp(self) -> float: """ Compute minimum component of the vector. """ def r(self) -> float: """ Alias to 1st component as RED channel in RGB. Alias to 1st component as RED channel in RGB. """ def x(self) -> float: """ Alias to 1st component as X coordinate in XYZ. Alias to 1st component as X coordinate in XYZ. """ def xy(self) -> gp_Vec2f: """ None """ def xyz(self) -> gp_Vec3f: """ None """ def xz(self) -> gp_Vec2f: """ None """ def xzy(self) -> gp_Vec3f: """ None """ def y(self) -> float: """ Alias to 2nd component as Y coordinate in XYZ. Alias to 2nd component as Y coordinate in XYZ. """ def yx(self) -> gp_Vec2f: """ None """ def yxz(self) -> gp_Vec3f: """ None """ def yz(self) -> gp_Vec2f: """ None """ def yzx(self) -> gp_Vec3f: """ None """ def z(self) -> float: """ Alias to 3rd component as Z coordinate in XYZ. Alias to 3rd component as Z coordinate in XYZ. """ def zx(self) -> gp_Vec2f: """ None """ def zxy(self) -> gp_Vec3f: """ None """ def zy(self) -> gp_Vec2f: """ None """ def zyx(self) -> gp_Vec3f: """ None """ pass class gp_VectorWithNullMagnitude(Exception, BaseException): class type(): pass __cause__: getset_descriptor # value = __context__: getset_descriptor # value = __dict__: mappingproxy # value = mappingproxy({'__module__': 'OCP.gp', '__weakref__': , '__doc__': None}) __suppress_context__: member_descriptor # value = __traceback__: getset_descriptor # value = __weakref__: getset_descriptor # value = args: getset_descriptor # value = pass class gp_XY(): """ This class describes a cartesian coordinate entity in 2D space {X,Y}. This class is non persistent. This entity used for algebraic calculation. An XY can be transformed with a Trsf2d or a GTrsf2d from package gp. It is used in vectorial computations or for holding this type of information in data structures. """ def Add(self,theOther : gp_XY) -> None: """ Computes the sum of this number pair and number pair theOther """ def Added(self,theOther : gp_XY) -> gp_XY: """ Computes the sum of this number pair and number pair theOther """ def ChangeCoord(self,theIndex : int) -> float: """ None """ @overload def Coord(self,theIndex : int) -> float: """ returns the coordinate of range theIndex : theIndex = 1 => X is returned theIndex = 2 => Y is returned Raises OutOfRange if theIndex != {1, 2}. For this number pair, returns its coordinates X and Y. """ @overload def Coord(self) -> tuple[float, float]: ... def CrossMagnitude(self,theRight : gp_XY) -> float: """ computes the magnitude of the cross product between and theRight. Returns || ^ theRight || """ def CrossSquareMagnitude(self,theRight : gp_XY) -> float: """ computes the square magnitude of the cross product between and theRight. Returns || ^ theRight ||**2 """ def Crossed(self,theOther : gp_XY) -> float: ... def Divide(self,theScalar : float) -> None: """ divides by a real. """ def Divided(self,theScalar : float) -> gp_XY: """ Divides by a real. """ def Dot(self,theOther : gp_XY) -> float: """ Computes the scalar product between and theOther """ def IsEqual(self,theOther : gp_XY,theTolerance : float) -> bool: """ Returns true if the coordinates of this number pair are equal to the respective coordinates of the number pair theOther, within the specified tolerance theTolerance. I.e.: abs(.X() - theOther.X()) <= theTolerance and abs(.Y() - theOther.Y()) <= theTolerance and computations """ def Modulus(self) -> float: """ Computes Sqrt (X*X + Y*Y) where X and Y are the two coordinates of this number pair. """ @overload def Multiplied(self,theScalar : float) -> gp_XY: """ New = theMatrix * """ @overload def Multiplied(self,theMatrix : gp_Mat2d) -> gp_XY: ... @overload def Multiplied(self,theOther : gp_XY) -> gp_XY: ... @overload def Multiply(self,theOther : gp_XY) -> None: """ = theMatrix * = theMatrix * """ @overload def Multiply(self,theScalar : float) -> None: ... @overload def Multiply(self,theMatrix : gp_Mat2d) -> None: ... def Normalize(self) -> None: """ Raises ConstructionError if .Modulus() <= Resolution from gp Raises ConstructionError if .Modulus() <= Resolution from gp """ def Normalized(self) -> gp_XY: """ Raises ConstructionError if .Modulus() <= Resolution from gp """ def Reverse(self) -> None: ... def Reversed(self) -> gp_XY: ... @overload def SetCoord(self,theIndex : int,theXi : float) -> None: """ modifies the coordinate of range theIndex theIndex = 1 => X is modified theIndex = 2 => Y is modified Raises OutOfRange if theIndex != {1, 2}. For this number pair, assigns the values theX and theY to its coordinates """ @overload def SetCoord(self,theX : float,theY : float) -> None: ... @overload def SetLinearForm(self,theA1 : float,theXY1 : gp_XY,theA2 : float,theXY2 : gp_XY,theXY3 : gp_XY) -> None: """ Computes the following linear combination and assigns the result to this number pair: -- Computes the following linear combination and assigns the result to this number pair: Computes the following linear combination and assigns the result to this number pair: Computes the following linear combination and assigns the result to this number pair: """ @overload def SetLinearForm(self,theA1 : float,theXY1 : gp_XY,theA2 : float,theXY2 : gp_XY) -> None: ... @overload def SetLinearForm(self,theA1 : float,theXY1 : gp_XY,theXY2 : gp_XY) -> None: ... @overload def SetLinearForm(self,theXY1 : gp_XY,theXY2 : gp_XY) -> None: ... def SetX(self,theX : float) -> None: """ Assigns the given value to the X coordinate of this number pair. """ def SetY(self,theY : float) -> None: """ Assigns the given value to the Y coordinate of this number pair. """ def SquareModulus(self) -> float: """ Computes X*X + Y*Y where X and Y are the two coordinates of this number pair. """ def Subtract(self,theOther : gp_XY) -> None: ... def Subtracted(self,theOther : gp_XY) -> gp_XY: ... def X(self) -> float: """ Returns the X coordinate of this number pair. """ def Y(self) -> float: """ Returns the Y coordinate of this number pair. """ def __add__(self,theOther : gp_XY) -> gp_XY: """ None """ def __iadd__(self,theOther : gp_XY) -> None: """ None """ @overload def __imul__(self,theScalar : float) -> None: """ None None None """ @overload def __imul__(self,theMatrix : gp_Mat2d) -> None: ... @overload def __imul__(self,theOther : gp_XY) -> None: ... @overload def __init__(self,theX : float,theY : float) -> None: ... @overload def __init__(self) -> None: ... def __isub__(self,theOther : gp_XY) -> None: """ None """ def __itruediv__(self,theScalar : float) -> None: """ None """ @overload def __mul__(self,theScalar : float) -> gp_XY: """ None None None """ @overload def __mul__(self,theMatrix : gp_Mat2d) -> gp_XY: ... @overload def __mul__(self,theOther : gp_XY) -> float: ... def __pow__(self,theOther : gp_XY) -> float: """ None """ @overload def __rmul__(self,theMatrix : gp_Mat2d) -> gp_XY: """ None None None """ @overload def __rmul__(self,theOther : gp_XY) -> float: ... @overload def __rmul__(self,theScalar : float) -> gp_XY: ... @overload def __sub__(self,theOther : gp_XY) -> gp_XY: """ None None """ @overload def __sub__(self) -> gp_XY: ... def __truediv__(self,theScalar : float) -> gp_XY: """ None """ pass class gp_XYZ(): """ This class describes a cartesian coordinate entity in 3D space {X,Y,Z}. This entity is used for algebraic calculation. This entity can be transformed with a "Trsf" or a "GTrsf" from package "gp". It is used in vectorial computations or for holding this type of information in data structures. """ def Add(self,theOther : gp_XYZ) -> None: ... def Added(self,theOther : gp_XYZ) -> gp_XYZ: ... def ChangeCoord(self,theIndex : int) -> float: """ None """ def ChangeData(self) -> float: """ Returns a ptr to coordinates location. Is useful for algorithms, but DOES NOT PERFORM ANY CHECKS! """ @overload def Coord(self,theIndex : int) -> float: """ returns the coordinate of range theIndex : theIndex = 1 => X is returned theIndex = 2 => Y is returned theIndex = 3 => Z is returned None """ @overload def Coord(self) -> tuple[float, float, float]: ... @overload def Cross(self,theRight : gp_XYZ) -> None: ... @overload def Cross(self,theOther : gp_XYZ) -> None: ... def CrossCross(self,theCoord1 : gp_XYZ,theCoord2 : gp_XYZ) -> None: """ Triple vector product Computes = .Cross(theCoord1.Cross(theCoord2)) Triple vector product Computes = .Cross(theCoord1.Cross(theCoord2)) """ def CrossCrossed(self,theCoord1 : gp_XYZ,theCoord2 : gp_XYZ) -> gp_XYZ: """ Triple vector product computes New = .Cross(theCoord1.Cross(theCoord2)) """ def CrossMagnitude(self,theRight : gp_XYZ) -> float: """ Computes the magnitude of the cross product between and theRight. Returns || ^ theRight || Computes the magnitude of the cross product between and theRight. Returns || ^ theRight || """ def CrossSquareMagnitude(self,theRight : gp_XYZ) -> float: """ Computes the square magnitude of the cross product between and theRight. Returns || ^ theRight ||**2 Computes the square magnitude of the cross product between and theRight. Returns || ^ theRight ||**2 """ def Crossed(self,theOther : gp_XYZ) -> gp_XYZ: ... def Divide(self,theScalar : float) -> None: """ divides by a real. """ def Divided(self,theScalar : float) -> gp_XYZ: """ divides by a real. """ def Dot(self,theOther : gp_XYZ) -> float: """ computes the scalar product between and theOther """ def DotCross(self,theCoord1 : gp_XYZ,theCoord2 : gp_XYZ) -> float: """ computes the triple scalar product computes the triple scalar product """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def GetData(self) -> float: """ Returns a const ptr to coordinates location. Is useful for algorithms, but DOES NOT PERFORM ANY CHECKS! """ def InitFromJson(self,theSStream : Any,theStreamPos : int) -> bool: """ Inits the content of me from the stream """ def IsEqual(self,theOther : gp_XYZ,theTolerance : float) -> bool: """ Returns True if he coordinates of this XYZ object are equal to the respective coordinates Other, within the specified tolerance theTolerance. I.e.: abs(.X() - theOther.X()) <= theTolerance and abs(.Y() - theOther.Y()) <= theTolerance and abs(.Z() - theOther.Z()) <= theTolerance. """ def Modulus(self) -> float: """ computes Sqrt (X*X + Y*Y + Z*Z) where X, Y and Z are the three coordinates of this XYZ object. """ @overload def Multiplied(self,theMatrix : gp_Mat) -> gp_XYZ: """ New = theMatrix * """ @overload def Multiplied(self,theOther : gp_XYZ) -> gp_XYZ: ... @overload def Multiplied(self,theScalar : float) -> gp_XYZ: ... @overload def Multiply(self,theMatrix : gp_Mat) -> None: """ = theMatrix * = theMatrix * """ @overload def Multiply(self,theOther : gp_XYZ) -> None: ... @overload def Multiply(self,theScalar : float) -> None: ... def Normalize(self) -> None: """ Raised if .Modulus() <= Resolution from gp Raised if .Modulus() <= Resolution from gp """ def Normalized(self) -> gp_XYZ: """ Raised if .Modulus() <= Resolution from gp """ def Reverse(self) -> None: ... def Reversed(self) -> gp_XYZ: ... @overload def SetCoord(self,theIndex : int,theXi : float) -> None: """ For this XYZ object, assigns the values theX, theY and theZ to its three coordinates modifies the coordinate of range theIndex theIndex = 1 => X is modified theIndex = 2 => Y is modified theIndex = 3 => Z is modified Raises OutOfRange if theIndex != {1, 2, 3}. """ @overload def SetCoord(self,theX : float,theY : float,theZ : float) -> None: ... @overload def SetLinearForm(self,theA1 : float,theXYZ1 : gp_XYZ,theA2 : float,theXYZ2 : gp_XYZ) -> None: """ is set to the following linear form : is set to the following linear form : is set to the following linear form : is set to the following linear form : is set to the following linear form : is set to the following linear form : """ @overload def SetLinearForm(self,theA1 : float,theXYZ1 : gp_XYZ,theA2 : float,theXYZ2 : gp_XYZ,theA3 : float,theXYZ3 : gp_XYZ) -> None: ... @overload def SetLinearForm(self,theXYZ1 : gp_XYZ,theXYZ2 : gp_XYZ) -> None: ... @overload def SetLinearForm(self,theA1 : float,theXYZ1 : gp_XYZ,theA2 : float,theXYZ2 : gp_XYZ,theXYZ3 : gp_XYZ) -> None: ... @overload def SetLinearForm(self,theA1 : float,theXYZ1 : gp_XYZ,theXYZ2 : gp_XYZ) -> None: ... @overload def SetLinearForm(self,theA1 : float,theXYZ1 : gp_XYZ,theA2 : float,theXYZ2 : gp_XYZ,theA3 : float,theXYZ3 : gp_XYZ,theXYZ4 : gp_XYZ) -> None: ... def SetX(self,theX : float) -> None: """ Assigns the given value to the X coordinate """ def SetY(self,theY : float) -> None: """ Assigns the given value to the Y coordinate """ def SetZ(self,theZ : float) -> None: """ Assigns the given value to the Z coordinate """ def SquareModulus(self) -> float: """ Computes X*X + Y*Y + Z*Z where X, Y and Z are the three coordinates of this XYZ object. """ def Subtract(self,theOther : gp_XYZ) -> None: ... def Subtracted(self,theOther : gp_XYZ) -> gp_XYZ: ... def X(self) -> float: """ Returns the X coordinate """ def Y(self) -> float: """ Returns the Y coordinate """ def Z(self) -> float: """ Returns the Z coordinate """ def __add__(self,theOther : gp_XYZ) -> gp_XYZ: """ None """ def __iadd__(self,theOther : gp_XYZ) -> None: """ None """ @overload def __imul__(self,theMatrix : gp_Mat) -> None: """ None None None """ @overload def __imul__(self,theScalar : float) -> None: ... @overload def __imul__(self,theOther : gp_XYZ) -> None: ... @overload def __init__(self) -> None: ... @overload def __init__(self,theX : float,theY : float,theZ : float) -> None: ... def __ipow__(self,theOther : gp_XYZ) -> None: """ None """ def __isub__(self,theOther : gp_XYZ) -> None: """ None """ def __itruediv__(self,theScalar : float) -> None: """ None """ @overload def __mul__(self,theScalar : float) -> gp_XYZ: """ None None None """ @overload def __mul__(self,theOther : gp_XYZ) -> float: ... @overload def __mul__(self,theMatrix : gp_Mat) -> gp_XYZ: ... def __pow__(self,theOther : gp_XYZ) -> gp_XYZ: """ None """ @overload def __rmul__(self,theScalar : float) -> gp_XYZ: """ None None None """ @overload def __rmul__(self,theOther : gp_XYZ) -> float: ... @overload def __rmul__(self,theMatrix : gp_Mat) -> gp_XYZ: ... def __sub__(self,theOther : gp_XYZ) -> gp_XYZ: """ None """ def __truediv__(self,theScalar : float) -> gp_XYZ: """ None """ pass @overload def __mul__(theScalar : float,theV : gp_Vec2d) -> gp_Vec2d: """ None None None None None None None None """ @overload def __mul__(theMatrix : gp_Mat,theCoord1 : gp_XYZ) -> gp_XYZ: pass @overload def __mul__(theScalar : float,theV : gp_Vec) -> gp_Vec: pass @overload def __mul__(theScalar : float,theCoord1 : gp_XY) -> gp_XY: pass @overload def __mul__(theScalar : float,theMat3D : gp_Mat) -> gp_Mat: pass @overload def __mul__(theMatrix : gp_Mat2d,theCoord1 : gp_XY) -> gp_XY: pass @overload def __mul__(theScalar : float,theCoord1 : gp_XYZ) -> gp_XYZ: pass @overload def __mul__(theScalar : float,theMat2D : gp_Mat2d) -> gp_Mat2d: pass @overload def __rmul__(theMatrix : gp_Mat2d,theCoord1 : gp_XY) -> gp_XY: """ None None None None None None None None """ @overload def __rmul__(theScalar : float,theMat2D : gp_Mat2d) -> gp_Mat2d: pass @overload def __rmul__(theScalar : float,theV : gp_Vec2d) -> gp_Vec2d: pass @overload def __rmul__(theScalar : float,theCoord1 : gp_XY) -> gp_XY: pass @overload def __rmul__(theScalar : float,theCoord1 : gp_XYZ) -> gp_XYZ: pass @overload def __rmul__(theMatrix : gp_Mat,theCoord1 : gp_XYZ) -> gp_XYZ: pass @overload def __rmul__(theScalar : float,theV : gp_Vec) -> gp_Vec: pass @overload def __rmul__(theScalar : float,theMat3D : gp_Mat) -> gp_Mat: pass gp_Ax1Mirror: OCP.gp.gp_TrsfForm # value = gp_Ax2Mirror: OCP.gp.gp_TrsfForm # value = gp_CompoundTrsf: OCP.gp.gp_TrsfForm # value = gp_EulerAngles: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_XYX: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_XYZ: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_XZX: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_XZY: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_YXY: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_YXZ: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_YZX: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_YZY: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_ZXY: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_ZXZ: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_ZYX: OCP.gp.gp_EulerSequence # value = gp_Extrinsic_ZYZ: OCP.gp.gp_EulerSequence # value = gp_Identity: OCP.gp.gp_TrsfForm # value = gp_Intrinsic_XYX: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_XYZ: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_XZX: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_XZY: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_YXY: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_YXZ: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_YZX: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_YZY: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_ZXY: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_ZXZ: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_ZYX: OCP.gp.gp_EulerSequence # value = gp_Intrinsic_ZYZ: OCP.gp.gp_EulerSequence # value = gp_Other: OCP.gp.gp_TrsfForm # value = gp_PntMirror: OCP.gp.gp_TrsfForm # value = gp_Rotation: OCP.gp.gp_TrsfForm # value = gp_Scale: OCP.gp.gp_TrsfForm # value = gp_Translation: OCP.gp.gp_TrsfForm # value = gp_YawPitchRoll: OCP.gp.gp_EulerSequence # value =