import OCP.GeomAbs from typing import * from typing import Iterable as iterable from typing import Iterator as iterator from numpy import float64 _Shape = Tuple[int, ...] __all__ = [ "GeomAbs_BSplKnotDistribution", "GeomAbs_CurveType", "GeomAbs_IsoType", "GeomAbs_JoinType", "GeomAbs_Shape", "GeomAbs_SurfaceType", "GeomAbs_Arc", "GeomAbs_BSplineCurve", "GeomAbs_BSplineSurface", "GeomAbs_BezierCurve", "GeomAbs_BezierSurface", "GeomAbs_C0", "GeomAbs_C1", "GeomAbs_C2", "GeomAbs_C3", "GeomAbs_CN", "GeomAbs_Circle", "GeomAbs_Cone", "GeomAbs_Cylinder", "GeomAbs_Ellipse", "GeomAbs_G1", "GeomAbs_G2", "GeomAbs_Hyperbola", "GeomAbs_Intersection", "GeomAbs_IsoU", "GeomAbs_IsoV", "GeomAbs_Line", "GeomAbs_NonUniform", "GeomAbs_NoneIso", "GeomAbs_OffsetCurve", "GeomAbs_OffsetSurface", "GeomAbs_OtherCurve", "GeomAbs_OtherSurface", "GeomAbs_Parabola", "GeomAbs_PiecewiseBezier", "GeomAbs_Plane", "GeomAbs_QuasiUniform", "GeomAbs_Sphere", "GeomAbs_SurfaceOfExtrusion", "GeomAbs_SurfaceOfRevolution", "GeomAbs_Tangent", "GeomAbs_Torus", "GeomAbs_Uniform" ] class GeomAbs_BSplKnotDistribution(): """ This enumeration is used in the classes BSplineCurve and BSplineSurface to describe the repartition of set of knots. (comments in classes BSplineCurve and BSplineSurface) Members: GeomAbs_NonUniform GeomAbs_Uniform GeomAbs_QuasiUniform GeomAbs_PiecewiseBezier """ def __eq__(self,other : object) -> bool: ... def __getstate__(self) -> int: ... def __hash__(self) -> int: ... def __index__(self) -> int: ... def __init__(self,value : int) -> None: ... def __int__(self) -> int: ... def __ne__(self,other : object) -> bool: ... def __repr__(self) -> str: ... def __setstate__(self,state : int) -> None: ... def __str__(self) -> str: ... @property def name(self) -> None: """ :type: None """ @property def value(self) -> int: """ :type: int """ GeomAbs_NonUniform: OCP.GeomAbs.GeomAbs_BSplKnotDistribution # value = GeomAbs_PiecewiseBezier: OCP.GeomAbs.GeomAbs_BSplKnotDistribution # value = GeomAbs_QuasiUniform: OCP.GeomAbs.GeomAbs_BSplKnotDistribution # value = GeomAbs_Uniform: OCP.GeomAbs.GeomAbs_BSplKnotDistribution # value = __entries: dict # value = {'GeomAbs_NonUniform': (, None), 'GeomAbs_Uniform': (, None), 'GeomAbs_QuasiUniform': (, None), 'GeomAbs_PiecewiseBezier': (, None)} __members__: dict # value = {'GeomAbs_NonUniform': , 'GeomAbs_Uniform': , 'GeomAbs_QuasiUniform': , 'GeomAbs_PiecewiseBezier': } pass class GeomAbs_CurveType(): """ Identifies the type of a curve. Members: GeomAbs_Line GeomAbs_Circle GeomAbs_Ellipse GeomAbs_Hyperbola GeomAbs_Parabola GeomAbs_BezierCurve GeomAbs_BSplineCurve GeomAbs_OffsetCurve GeomAbs_OtherCurve """ def __eq__(self,other : object) -> bool: ... def __getstate__(self) -> int: ... def __hash__(self) -> int: ... def __index__(self) -> int: ... def __init__(self,value : int) -> None: ... def __int__(self) -> int: ... def __ne__(self,other : object) -> bool: ... def __repr__(self) -> str: ... def __setstate__(self,state : int) -> None: ... def __str__(self) -> str: ... @property def name(self) -> None: """ :type: None """ @property def value(self) -> int: """ :type: int """ GeomAbs_BSplineCurve: OCP.GeomAbs.GeomAbs_CurveType # value = GeomAbs_BezierCurve: OCP.GeomAbs.GeomAbs_CurveType # value = GeomAbs_Circle: OCP.GeomAbs.GeomAbs_CurveType # value = GeomAbs_Ellipse: OCP.GeomAbs.GeomAbs_CurveType # value = GeomAbs_Hyperbola: OCP.GeomAbs.GeomAbs_CurveType # value = GeomAbs_Line: OCP.GeomAbs.GeomAbs_CurveType # value = GeomAbs_OffsetCurve: OCP.GeomAbs.GeomAbs_CurveType # value = GeomAbs_OtherCurve: OCP.GeomAbs.GeomAbs_CurveType # value = GeomAbs_Parabola: OCP.GeomAbs.GeomAbs_CurveType # value = __entries: dict # value = {'GeomAbs_Line': (, None), 'GeomAbs_Circle': (, None), 'GeomAbs_Ellipse': (, None), 'GeomAbs_Hyperbola': (, None), 'GeomAbs_Parabola': (, None), 'GeomAbs_BezierCurve': (, None), 'GeomAbs_BSplineCurve': (, None), 'GeomAbs_OffsetCurve': (, None), 'GeomAbs_OtherCurve': (, None)} __members__: dict # value = {'GeomAbs_Line': , 'GeomAbs_Circle': , 'GeomAbs_Ellipse': , 'GeomAbs_Hyperbola': , 'GeomAbs_Parabola': , 'GeomAbs_BezierCurve': , 'GeomAbs_BSplineCurve': , 'GeomAbs_OffsetCurve': , 'GeomAbs_OtherCurve': } pass class GeomAbs_IsoType(): """ this enumeration describes if a curve is an U isoparaetric or V isoparametric Members: GeomAbs_IsoU GeomAbs_IsoV GeomAbs_NoneIso """ def __eq__(self,other : object) -> bool: ... def __getstate__(self) -> int: ... def __hash__(self) -> int: ... def __index__(self) -> int: ... def __init__(self,value : int) -> None: ... def __int__(self) -> int: ... def __ne__(self,other : object) -> bool: ... def __repr__(self) -> str: ... def __setstate__(self,state : int) -> None: ... def __str__(self) -> str: ... @property def name(self) -> None: """ :type: None """ @property def value(self) -> int: """ :type: int """ GeomAbs_IsoU: OCP.GeomAbs.GeomAbs_IsoType # value = GeomAbs_IsoV: OCP.GeomAbs.GeomAbs_IsoType # value = GeomAbs_NoneIso: OCP.GeomAbs.GeomAbs_IsoType # value = __entries: dict # value = {'GeomAbs_IsoU': (, None), 'GeomAbs_IsoV': (, None), 'GeomAbs_NoneIso': (, None)} __members__: dict # value = {'GeomAbs_IsoU': , 'GeomAbs_IsoV': , 'GeomAbs_NoneIso': } pass class GeomAbs_JoinType(): """ Characterizes the type of a join, built by an algorithm for constructing parallel curves, between two consecutive arcs of a contour parallel to a given contour. Members: GeomAbs_Arc GeomAbs_Tangent GeomAbs_Intersection """ def __eq__(self,other : object) -> bool: ... def __getstate__(self) -> int: ... def __hash__(self) -> int: ... def __index__(self) -> int: ... def __init__(self,value : int) -> None: ... def __int__(self) -> int: ... def __ne__(self,other : object) -> bool: ... def __repr__(self) -> str: ... def __setstate__(self,state : int) -> None: ... def __str__(self) -> str: ... @property def name(self) -> None: """ :type: None """ @property def value(self) -> int: """ :type: int """ GeomAbs_Arc: OCP.GeomAbs.GeomAbs_JoinType # value = GeomAbs_Intersection: OCP.GeomAbs.GeomAbs_JoinType # value = GeomAbs_Tangent: OCP.GeomAbs.GeomAbs_JoinType # value = __entries: dict # value = {'GeomAbs_Arc': (, None), 'GeomAbs_Tangent': (, None), 'GeomAbs_Intersection': (, None)} __members__: dict # value = {'GeomAbs_Arc': , 'GeomAbs_Tangent': , 'GeomAbs_Intersection': } pass class GeomAbs_Shape(): """ Provides information about the continuity of a curve: - C0: only geometric continuity. - G1: for each point on the curve, the tangent vectors "on the right" and "on the left" are collinear with the same orientation. - C1: continuity of the first derivative. The "C1" curve is also "G1" but, in addition, the tangent vectors " on the right" and "on the left" are equal. - G2: for each point on the curve, the normalized normal vectors "on the right" and "on the left" are equal. - C2: continuity of the second derivative. - C3: continuity of the third derivative. - CN: continuity of the N-th derivative, whatever is the value given for N (infinite order of continuity). Also provides information about the continuity of a surface: - C0: only geometric continuity. - C1: continuity of the first derivatives; any isoparametric (in U or V) of a surface "C1" is also "C1". - G2: for BSpline curves only; "on the right" and "on the left" of a knot the computation of the "main curvature radii" and the "main directions" (when they exist) gives the same result. - C2: continuity of the second derivative. - C3: continuity of the third derivative. - CN: continuity of any N-th derivative, whatever is the value given for N (infinite order of continuity). We may also say that a surface is "Ci" in u, and "Cj" in v to indicate the continuity of its derivatives up to the order i in the u parametric direction, and j in the v parametric direction. Members: GeomAbs_C0 GeomAbs_G1 GeomAbs_C1 GeomAbs_G2 GeomAbs_C2 GeomAbs_C3 GeomAbs_CN """ def __eq__(self,other : object) -> bool: ... def __getstate__(self) -> int: ... def __hash__(self) -> int: ... def __index__(self) -> int: ... def __init__(self,value : int) -> None: ... def __int__(self) -> int: ... def __ne__(self,other : object) -> bool: ... def __repr__(self) -> str: ... def __setstate__(self,state : int) -> None: ... def __str__(self) -> str: ... @property def name(self) -> None: """ :type: None """ @property def value(self) -> int: """ :type: int """ GeomAbs_C0: OCP.GeomAbs.GeomAbs_Shape # value = GeomAbs_C1: OCP.GeomAbs.GeomAbs_Shape # value = GeomAbs_C2: OCP.GeomAbs.GeomAbs_Shape # value = GeomAbs_C3: OCP.GeomAbs.GeomAbs_Shape # value = GeomAbs_CN: OCP.GeomAbs.GeomAbs_Shape # value = GeomAbs_G1: OCP.GeomAbs.GeomAbs_Shape # value = GeomAbs_G2: OCP.GeomAbs.GeomAbs_Shape # value = __entries: dict # value = {'GeomAbs_C0': (, None), 'GeomAbs_G1': (, None), 'GeomAbs_C1': (, None), 'GeomAbs_G2': (, None), 'GeomAbs_C2': (, None), 'GeomAbs_C3': (, None), 'GeomAbs_CN': (, None)} __members__: dict # value = {'GeomAbs_C0': , 'GeomAbs_G1': , 'GeomAbs_C1': , 'GeomAbs_G2': , 'GeomAbs_C2': , 'GeomAbs_C3': , 'GeomAbs_CN': } pass class GeomAbs_SurfaceType(): """ None Members: GeomAbs_Plane GeomAbs_Cylinder GeomAbs_Cone GeomAbs_Sphere GeomAbs_Torus GeomAbs_BezierSurface GeomAbs_BSplineSurface GeomAbs_SurfaceOfRevolution GeomAbs_SurfaceOfExtrusion GeomAbs_OffsetSurface GeomAbs_OtherSurface """ def __eq__(self,other : object) -> bool: ... def __getstate__(self) -> int: ... def __hash__(self) -> int: ... def __index__(self) -> int: ... def __init__(self,value : int) -> None: ... def __int__(self) -> int: ... def __ne__(self,other : object) -> bool: ... def __repr__(self) -> str: ... def __setstate__(self,state : int) -> None: ... def __str__(self) -> str: ... @property def name(self) -> None: """ :type: None """ @property def value(self) -> int: """ :type: int """ GeomAbs_BSplineSurface: OCP.GeomAbs.GeomAbs_SurfaceType # value = GeomAbs_BezierSurface: OCP.GeomAbs.GeomAbs_SurfaceType # value = GeomAbs_Cone: OCP.GeomAbs.GeomAbs_SurfaceType # value = GeomAbs_Cylinder: OCP.GeomAbs.GeomAbs_SurfaceType # value = GeomAbs_OffsetSurface: OCP.GeomAbs.GeomAbs_SurfaceType # value = GeomAbs_OtherSurface: OCP.GeomAbs.GeomAbs_SurfaceType # value = GeomAbs_Plane: OCP.GeomAbs.GeomAbs_SurfaceType # value = GeomAbs_Sphere: OCP.GeomAbs.GeomAbs_SurfaceType # value = GeomAbs_SurfaceOfExtrusion: OCP.GeomAbs.GeomAbs_SurfaceType # value = GeomAbs_SurfaceOfRevolution: OCP.GeomAbs.GeomAbs_SurfaceType # value = GeomAbs_Torus: OCP.GeomAbs.GeomAbs_SurfaceType # value = __entries: dict # value = {'GeomAbs_Plane': (, None), 'GeomAbs_Cylinder': (, None), 'GeomAbs_Cone': (, None), 'GeomAbs_Sphere': (, None), 'GeomAbs_Torus': (, None), 'GeomAbs_BezierSurface': (, None), 'GeomAbs_BSplineSurface': (, None), 'GeomAbs_SurfaceOfRevolution': (, None), 'GeomAbs_SurfaceOfExtrusion': (, None), 'GeomAbs_OffsetSurface': (, None), 'GeomAbs_OtherSurface': (, None)} __members__: dict # value = {'GeomAbs_Plane': , 'GeomAbs_Cylinder': , 'GeomAbs_Cone': , 'GeomAbs_Sphere': , 'GeomAbs_Torus': , 'GeomAbs_BezierSurface': , 'GeomAbs_BSplineSurface': , 'GeomAbs_SurfaceOfRevolution': , 'GeomAbs_SurfaceOfExtrusion': , 'GeomAbs_OffsetSurface': , 'GeomAbs_OtherSurface': } pass GeomAbs_Arc: OCP.GeomAbs.GeomAbs_JoinType # value = GeomAbs_BSplineCurve: OCP.GeomAbs.GeomAbs_CurveType # value = GeomAbs_BSplineSurface: OCP.GeomAbs.GeomAbs_SurfaceType # value = GeomAbs_BezierCurve: OCP.GeomAbs.GeomAbs_CurveType # value = GeomAbs_BezierSurface: OCP.GeomAbs.GeomAbs_SurfaceType # value = GeomAbs_C0: OCP.GeomAbs.GeomAbs_Shape # value = GeomAbs_C1: OCP.GeomAbs.GeomAbs_Shape # value = GeomAbs_C2: OCP.GeomAbs.GeomAbs_Shape # value = GeomAbs_C3: OCP.GeomAbs.GeomAbs_Shape # value = GeomAbs_CN: OCP.GeomAbs.GeomAbs_Shape # value = GeomAbs_Circle: OCP.GeomAbs.GeomAbs_CurveType # value = GeomAbs_Cone: OCP.GeomAbs.GeomAbs_SurfaceType # value = GeomAbs_Cylinder: OCP.GeomAbs.GeomAbs_SurfaceType # value = GeomAbs_Ellipse: OCP.GeomAbs.GeomAbs_CurveType # value = GeomAbs_G1: OCP.GeomAbs.GeomAbs_Shape # value = GeomAbs_G2: OCP.GeomAbs.GeomAbs_Shape # value = GeomAbs_Hyperbola: OCP.GeomAbs.GeomAbs_CurveType # value = GeomAbs_Intersection: OCP.GeomAbs.GeomAbs_JoinType # value = GeomAbs_IsoU: OCP.GeomAbs.GeomAbs_IsoType # value = GeomAbs_IsoV: OCP.GeomAbs.GeomAbs_IsoType # value = GeomAbs_Line: OCP.GeomAbs.GeomAbs_CurveType # value = GeomAbs_NonUniform: OCP.GeomAbs.GeomAbs_BSplKnotDistribution # value = GeomAbs_NoneIso: OCP.GeomAbs.GeomAbs_IsoType # value = GeomAbs_OffsetCurve: OCP.GeomAbs.GeomAbs_CurveType # value = GeomAbs_OffsetSurface: OCP.GeomAbs.GeomAbs_SurfaceType # value = GeomAbs_OtherCurve: OCP.GeomAbs.GeomAbs_CurveType # value = GeomAbs_OtherSurface: OCP.GeomAbs.GeomAbs_SurfaceType # value = GeomAbs_Parabola: OCP.GeomAbs.GeomAbs_CurveType # value = GeomAbs_PiecewiseBezier: OCP.GeomAbs.GeomAbs_BSplKnotDistribution # value = GeomAbs_Plane: OCP.GeomAbs.GeomAbs_SurfaceType # value = GeomAbs_QuasiUniform: OCP.GeomAbs.GeomAbs_BSplKnotDistribution # value = GeomAbs_Sphere: OCP.GeomAbs.GeomAbs_SurfaceType # value = GeomAbs_SurfaceOfExtrusion: OCP.GeomAbs.GeomAbs_SurfaceType # value = GeomAbs_SurfaceOfRevolution: OCP.GeomAbs.GeomAbs_SurfaceType # value = GeomAbs_Tangent: OCP.GeomAbs.GeomAbs_JoinType # value = GeomAbs_Torus: OCP.GeomAbs.GeomAbs_SurfaceType # value = GeomAbs_Uniform: OCP.GeomAbs.GeomAbs_BSplKnotDistribution # value =