import OCP.Geom2d from typing import * from typing import Iterable as iterable from typing import Iterator as iterator from numpy import float64 _Shape = Tuple[int, ...] import OCP.TColStd import OCP.gp import OCP.TColgp import OCP.Standard import io import OCP.GeomAbs __all__ = [ "Geom2d_Geometry", "Geom2d_Curve", "Geom2d_BoundedCurve", "Geom2d_BSplineCurve", "Geom2d_Point", "Geom2d_Conic", "Geom2d_Circle", "Geom2d_BezierCurve", "Geom2d_Vector", "Geom2d_Ellipse", "Geom2d_AxisPlacement", "Geom2d_Hyperbola", "Geom2d_Line", "Geom2d_OffsetCurve", "Geom2d_Parabola", "Geom2d_CartesianPoint", "Geom2d_Transformation", "Geom2d_TrimmedCurve", "Geom2d_UndefinedDerivative", "Geom2d_UndefinedValue", "Geom2d_Direction", "Geom2d_VectorWithMagnitude" ] class Geom2d_Geometry(OCP.Standard.Standard_Transient): """ The general abstract class Geometry in 2D space describes the common behaviour of all the geometric entities.The general abstract class Geometry in 2D space describes the common behaviour of all the geometric entities.The general abstract class Geometry in 2D space describes the common behaviour of all the geometric entities. """ def Copy(self) -> Geom2d_Geometry: """ None """ def DecrementRefCounter(self) -> int: """ Decrements the reference counter of this object; returns the decremented value """ def Delete(self) -> None: """ Memory deallocator for transient classes """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def DynamicType(self) -> OCP.Standard.Standard_Type: """ None """ def GetRefCount(self) -> int: """ Get the reference counter of this object """ def IncrementRefCounter(self) -> None: """ Increments the reference counter of this object """ @overload def IsInstance(self,theType : OCP.Standard.Standard_Type) -> bool: """ Returns a true value if this is an instance of Type. Returns a true value if this is an instance of TypeName. """ @overload def IsInstance(self,theTypeName : str) -> bool: ... @overload def IsKind(self,theTypeName : str) -> bool: """ Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. """ @overload def IsKind(self,theType : OCP.Standard.Standard_Type) -> bool: ... @overload def Mirror(self,P : OCP.gp.gp_Pnt2d) -> None: """ Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirror(self,A : OCP.gp.gp_Ax2d) -> None: ... @overload def Mirrored(self,A : OCP.gp.gp_Ax2d) -> Geom2d_Geometry: """ None None """ @overload def Mirrored(self,P : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: ... def Rotate(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> None: """ Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. """ def Rotated(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> Geom2d_Geometry: """ None """ def Scale(self,P : OCP.gp.gp_Pnt2d,S : float) -> None: """ Scales a Geometry. S is the scaling value. """ def Scaled(self,P : OCP.gp.gp_Pnt2d,S : float) -> Geom2d_Geometry: """ None """ def This(self) -> OCP.Standard.Standard_Transient: """ Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. """ def Transform(self,T : OCP.gp.gp_Trsf2d) -> None: """ Transformation of a geometric object. This tansformation can be a translation, a rotation, a symmetry, a scaling or a complex transformation obtained by combination of the previous elementaries transformations. (see class Transformation of the package Geom2d). The following transformations have the same properties as the previous ones but they don't modified the object itself. A copy of the object is returned. """ def Transformed(self,T : OCP.gp.gp_Trsf2d) -> Geom2d_Geometry: """ None """ @overload def Translate(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> None: """ Translates a Geometry. V is the vector of the translation. Translates a Geometry from the point P1 to the point P2. """ @overload def Translate(self,V : OCP.gp.gp_Vec2d) -> None: ... @overload def Translated(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: """ None None """ @overload def Translated(self,V : OCP.gp.gp_Vec2d) -> Geom2d_Geometry: ... @staticmethod def get_type_descriptor_s() -> OCP.Standard.Standard_Type: """ None """ @staticmethod def get_type_name_s() -> str: """ None """ pass class Geom2d_Curve(Geom2d_Geometry, OCP.Standard.Standard_Transient): """ The abstract class Curve describes the common behavior of curves in 2D space. The Geom2d package provides numerous concrete classes of derived curves, including lines, circles, conics, Bezier or BSpline curves, etc. The main characteristic of these curves is that they are parameterized. The Geom2d_Curve class shows: - how to work with the parametric equation of a curve in order to calculate the point of parameter u, together with the vector tangent and the derivative vectors of order 2, 3,..., N at this point; - how to obtain general information about the curve (for example, level of continuity, closed characteristics, periodicity, bounds of the parameter field); - how the parameter changes when a geometric transformation is applied to the curve or when the orientation of the curve is inverted. All curves must have a geometric continuity: a curve is at least "C0". Generally, this property is checked at the time of construction or when the curve is edited. Where this is not the case, the documentation explicitly states so. Warning The Geom2d package does not prevent the construction of curves with null length or curves which self-intersect.The abstract class Curve describes the common behavior of curves in 2D space. The Geom2d package provides numerous concrete classes of derived curves, including lines, circles, conics, Bezier or BSpline curves, etc. The main characteristic of these curves is that they are parameterized. The Geom2d_Curve class shows: - how to work with the parametric equation of a curve in order to calculate the point of parameter u, together with the vector tangent and the derivative vectors of order 2, 3,..., N at this point; - how to obtain general information about the curve (for example, level of continuity, closed characteristics, periodicity, bounds of the parameter field); - how the parameter changes when a geometric transformation is applied to the curve or when the orientation of the curve is inverted. All curves must have a geometric continuity: a curve is at least "C0". Generally, this property is checked at the time of construction or when the curve is edited. Where this is not the case, the documentation explicitly states so. Warning The Geom2d package does not prevent the construction of curves with null length or curves which self-intersect.The abstract class Curve describes the common behavior of curves in 2D space. The Geom2d package provides numerous concrete classes of derived curves, including lines, circles, conics, Bezier or BSpline curves, etc. The main characteristic of these curves is that they are parameterized. The Geom2d_Curve class shows: - how to work with the parametric equation of a curve in order to calculate the point of parameter u, together with the vector tangent and the derivative vectors of order 2, 3,..., N at this point; - how to obtain general information about the curve (for example, level of continuity, closed characteristics, periodicity, bounds of the parameter field); - how the parameter changes when a geometric transformation is applied to the curve or when the orientation of the curve is inverted. All curves must have a geometric continuity: a curve is at least "C0". Generally, this property is checked at the time of construction or when the curve is edited. Where this is not the case, the documentation explicitly states so. Warning The Geom2d package does not prevent the construction of curves with null length or curves which self-intersect. """ def Continuity(self) -> OCP.GeomAbs.GeomAbs_Shape: """ It is the global continuity of the curve : C0 : only geometric continuity, C1 : continuity of the first derivative all along the Curve, C2 : continuity of the second derivative all along the Curve, C3 : continuity of the third derivative all along the Curve, G1 : tangency continuity all along the Curve, G2 : curvature continuity all along the Curve, CN : the order of continuity is infinite. """ def Copy(self) -> Geom2d_Geometry: """ None """ def D0(self,U : float,P : OCP.gp.gp_Pnt2d) -> None: """ Returns in P the point of parameter U. If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. """ def D1(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d) -> None: """ Returns the point P of parameter U and the first derivative V1. Raised if the continuity of the curve is not C1. """ def D2(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d) -> None: """ Returns the point P of parameter U, the first and second derivatives V1 and V2. Raised if the continuity of the curve is not C2. """ def D3(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d,V3 : OCP.gp.gp_Vec2d) -> None: """ Returns the point P of parameter U, the first, the second and the third derivative. Raised if the continuity of the curve is not C3. """ def DN(self,U : float,N : int) -> OCP.gp.gp_Vec2d: """ For the point of parameter U of this curve, computes the vector corresponding to the Nth derivative. Exceptions StdFail_UndefinedDerivative if: - the continuity of the curve is not "CN", or - the derivative vector cannot be computed easily; this is the case with specific types of curve (for example, a rational BSpline curve where N is greater than 3). Standard_RangeError if N is less than 1. """ def DecrementRefCounter(self) -> int: """ Decrements the reference counter of this object; returns the decremented value """ def Delete(self) -> None: """ Memory deallocator for transient classes """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def DynamicType(self) -> OCP.Standard.Standard_Type: """ None """ def FirstParameter(self) -> float: """ Returns the value of the first parameter. Warnings : It can be RealFirst or RealLast from package Standard if the curve is infinite """ def GetRefCount(self) -> int: """ Get the reference counter of this object """ def IncrementRefCounter(self) -> None: """ Increments the reference counter of this object """ def IsCN(self,N : int) -> bool: """ Returns true if the degree of continuity of this curve is at least N. Exceptions Standard_RangeError if N is less than 0. """ def IsClosed(self) -> bool: """ Returns true if the curve is closed. Examples : Some curves such as circle are always closed, others such as line are never closed (by definition). Some Curves such as OffsetCurve can be closed or not. These curves are considered as closed if the distance between the first point and the last point of the curve is lower or equal to the Resolution from package gp which is a fixed criterion independent of the application. """ @overload def IsInstance(self,theType : OCP.Standard.Standard_Type) -> bool: """ Returns a true value if this is an instance of Type. Returns a true value if this is an instance of TypeName. """ @overload def IsInstance(self,theTypeName : str) -> bool: ... @overload def IsKind(self,theTypeName : str) -> bool: """ Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. """ @overload def IsKind(self,theType : OCP.Standard.Standard_Type) -> bool: ... def IsPeriodic(self) -> bool: """ Returns true if the parameter of the curve is periodic. It is possible only if the curve is closed and if the following relation is satisfied : for each parametric value U the distance between the point P(u) and the point P (u + T) is lower or equal to Resolution from package gp, T is the period and must be a constant. There are three possibilities : . the curve is never periodic by definition (SegmentLine) . the curve is always periodic by definition (Circle) . the curve can be defined as periodic (BSpline). In this case a function SetPeriodic allows you to give the shape of the curve. The general rule for this case is : if a curve can be periodic or not the default periodicity set is non periodic and you have to turn (explicitly) the curve into a periodic curve if you want the curve to be periodic. """ def LastParameter(self) -> float: """ Value of the last parameter. Warnings : It can be RealFirst or RealLast from package Standard if the curve is infinite """ @overload def Mirror(self,P : OCP.gp.gp_Pnt2d) -> None: """ Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirror(self,A : OCP.gp.gp_Ax2d) -> None: ... @overload def Mirrored(self,A : OCP.gp.gp_Ax2d) -> Geom2d_Geometry: """ None None """ @overload def Mirrored(self,P : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: ... def ParametricTransformation(self,T : OCP.gp.gp_Trsf2d) -> float: """ Returns the coefficient required to compute the parametric transformation of this curve when transformation T is applied. This coefficient is the ratio between the parameter of a point on this curve and the parameter of the transformed point on the new curve transformed by T. Note: this function generally returns 1. but it can be redefined (for example, on a line). """ def Period(self) -> float: """ Returns the period of this curve. raises if the curve is not periodic """ def Reverse(self) -> None: """ Changes the direction of parametrization of . The "FirstParameter" and the "LastParameter" are not changed but the orientation of the curve is modified. If the curve is bounded the StartPoint of the initial curve becomes the EndPoint of the reversed curve and the EndPoint of the initial curve becomes the StartPoint of the reversed curve. """ def Reversed(self) -> Geom2d_Curve: """ Creates a reversed duplicate Changes the orientation of this curve. The first and last parameters are not changed, but the parametric direction of the curve is reversed. If the curve is bounded: - the start point of the initial curve becomes the end point of the reversed curve, and - the end point of the initial curve becomes the start point of the reversed curve. - Reversed creates a new curve. """ def ReversedParameter(self,U : float) -> float: """ Computes the parameter on the reversed curve for the point of parameter U on this curve. Note: The point of parameter U on this curve is identical to the point of parameter ReversedParameter(U) on the reversed curve. """ def Rotate(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> None: """ Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. """ def Rotated(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> Geom2d_Geometry: """ None """ def Scale(self,P : OCP.gp.gp_Pnt2d,S : float) -> None: """ Scales a Geometry. S is the scaling value. """ def Scaled(self,P : OCP.gp.gp_Pnt2d,S : float) -> Geom2d_Geometry: """ None """ def This(self) -> OCP.Standard.Standard_Transient: """ Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. """ def Transform(self,T : OCP.gp.gp_Trsf2d) -> None: """ Transformation of a geometric object. This tansformation can be a translation, a rotation, a symmetry, a scaling or a complex transformation obtained by combination of the previous elementaries transformations. (see class Transformation of the package Geom2d). The following transformations have the same properties as the previous ones but they don't modified the object itself. A copy of the object is returned. """ def Transformed(self,T : OCP.gp.gp_Trsf2d) -> Geom2d_Geometry: """ None """ def TransformedParameter(self,U : float,T : OCP.gp.gp_Trsf2d) -> float: """ Computes the parameter on the curve transformed by T for the point of parameter U on this curve. Note: this function generally returns U but it can be redefined (for example, on a line). """ @overload def Translate(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> None: """ Translates a Geometry. V is the vector of the translation. Translates a Geometry from the point P1 to the point P2. """ @overload def Translate(self,V : OCP.gp.gp_Vec2d) -> None: ... @overload def Translated(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: """ None None """ @overload def Translated(self,V : OCP.gp.gp_Vec2d) -> Geom2d_Geometry: ... def Value(self,U : float) -> OCP.gp.gp_Pnt2d: """ Computes the point of parameter U on . If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. """ @staticmethod def get_type_descriptor_s() -> OCP.Standard.Standard_Type: """ None """ @staticmethod def get_type_name_s() -> str: """ None """ pass class Geom2d_BoundedCurve(Geom2d_Curve, Geom2d_Geometry, OCP.Standard.Standard_Transient): """ The abstract class BoundedCurve describes the common behavior of bounded curves in 2D space. A bounded curve is limited by two finite values of the parameter, termed respectively "first parameter" and "last parameter". The "first parameter" gives the "start point" of the bounded curve, and the "last parameter" gives the "end point" of the bounded curve. The length of a bounded curve is finite. The Geom2d package provides three concrete classes of bounded curves: - two frequently used mathematical formulations of complex curves: - Geom2d_BezierCurve, - Geom2d_BSplineCurve, and - Geom2d_TrimmedCurve to trim a curve, i.e. to only take part of the curve limited by two values of the parameter of the basis curve.The abstract class BoundedCurve describes the common behavior of bounded curves in 2D space. A bounded curve is limited by two finite values of the parameter, termed respectively "first parameter" and "last parameter". The "first parameter" gives the "start point" of the bounded curve, and the "last parameter" gives the "end point" of the bounded curve. The length of a bounded curve is finite. The Geom2d package provides three concrete classes of bounded curves: - two frequently used mathematical formulations of complex curves: - Geom2d_BezierCurve, - Geom2d_BSplineCurve, and - Geom2d_TrimmedCurve to trim a curve, i.e. to only take part of the curve limited by two values of the parameter of the basis curve.The abstract class BoundedCurve describes the common behavior of bounded curves in 2D space. A bounded curve is limited by two finite values of the parameter, termed respectively "first parameter" and "last parameter". The "first parameter" gives the "start point" of the bounded curve, and the "last parameter" gives the "end point" of the bounded curve. The length of a bounded curve is finite. The Geom2d package provides three concrete classes of bounded curves: - two frequently used mathematical formulations of complex curves: - Geom2d_BezierCurve, - Geom2d_BSplineCurve, and - Geom2d_TrimmedCurve to trim a curve, i.e. to only take part of the curve limited by two values of the parameter of the basis curve. """ def Continuity(self) -> OCP.GeomAbs.GeomAbs_Shape: """ It is the global continuity of the curve : C0 : only geometric continuity, C1 : continuity of the first derivative all along the Curve, C2 : continuity of the second derivative all along the Curve, C3 : continuity of the third derivative all along the Curve, G1 : tangency continuity all along the Curve, G2 : curvature continuity all along the Curve, CN : the order of continuity is infinite. """ def Copy(self) -> Geom2d_Geometry: """ None """ def D0(self,U : float,P : OCP.gp.gp_Pnt2d) -> None: """ Returns in P the point of parameter U. If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. """ def D1(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d) -> None: """ Returns the point P of parameter U and the first derivative V1. Raised if the continuity of the curve is not C1. """ def D2(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d) -> None: """ Returns the point P of parameter U, the first and second derivatives V1 and V2. Raised if the continuity of the curve is not C2. """ def D3(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d,V3 : OCP.gp.gp_Vec2d) -> None: """ Returns the point P of parameter U, the first, the second and the third derivative. Raised if the continuity of the curve is not C3. """ def DN(self,U : float,N : int) -> OCP.gp.gp_Vec2d: """ For the point of parameter U of this curve, computes the vector corresponding to the Nth derivative. Exceptions StdFail_UndefinedDerivative if: - the continuity of the curve is not "CN", or - the derivative vector cannot be computed easily; this is the case with specific types of curve (for example, a rational BSpline curve where N is greater than 3). Standard_RangeError if N is less than 1. """ def DecrementRefCounter(self) -> int: """ Decrements the reference counter of this object; returns the decremented value """ def Delete(self) -> None: """ Memory deallocator for transient classes """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def DynamicType(self) -> OCP.Standard.Standard_Type: """ None """ def EndPoint(self) -> OCP.gp.gp_Pnt2d: """ Returns the end point of the curve. The end point is the value of the curve for the "LastParameter" of the curve. """ def FirstParameter(self) -> float: """ Returns the value of the first parameter. Warnings : It can be RealFirst or RealLast from package Standard if the curve is infinite """ def GetRefCount(self) -> int: """ Get the reference counter of this object """ def IncrementRefCounter(self) -> None: """ Increments the reference counter of this object """ def IsCN(self,N : int) -> bool: """ Returns true if the degree of continuity of this curve is at least N. Exceptions Standard_RangeError if N is less than 0. """ def IsClosed(self) -> bool: """ Returns true if the curve is closed. Examples : Some curves such as circle are always closed, others such as line are never closed (by definition). Some Curves such as OffsetCurve can be closed or not. These curves are considered as closed if the distance between the first point and the last point of the curve is lower or equal to the Resolution from package gp which is a fixed criterion independent of the application. """ @overload def IsInstance(self,theType : OCP.Standard.Standard_Type) -> bool: """ Returns a true value if this is an instance of Type. Returns a true value if this is an instance of TypeName. """ @overload def IsInstance(self,theTypeName : str) -> bool: ... @overload def IsKind(self,theTypeName : str) -> bool: """ Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. """ @overload def IsKind(self,theType : OCP.Standard.Standard_Type) -> bool: ... def IsPeriodic(self) -> bool: """ Returns true if the parameter of the curve is periodic. It is possible only if the curve is closed and if the following relation is satisfied : for each parametric value U the distance between the point P(u) and the point P (u + T) is lower or equal to Resolution from package gp, T is the period and must be a constant. There are three possibilities : . the curve is never periodic by definition (SegmentLine) . the curve is always periodic by definition (Circle) . the curve can be defined as periodic (BSpline). In this case a function SetPeriodic allows you to give the shape of the curve. The general rule for this case is : if a curve can be periodic or not the default periodicity set is non periodic and you have to turn (explicitly) the curve into a periodic curve if you want the curve to be periodic. """ def LastParameter(self) -> float: """ Value of the last parameter. Warnings : It can be RealFirst or RealLast from package Standard if the curve is infinite """ @overload def Mirror(self,P : OCP.gp.gp_Pnt2d) -> None: """ Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirror(self,A : OCP.gp.gp_Ax2d) -> None: ... @overload def Mirrored(self,A : OCP.gp.gp_Ax2d) -> Geom2d_Geometry: """ None None """ @overload def Mirrored(self,P : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: ... def ParametricTransformation(self,T : OCP.gp.gp_Trsf2d) -> float: """ Returns the coefficient required to compute the parametric transformation of this curve when transformation T is applied. This coefficient is the ratio between the parameter of a point on this curve and the parameter of the transformed point on the new curve transformed by T. Note: this function generally returns 1. but it can be redefined (for example, on a line). """ def Period(self) -> float: """ Returns the period of this curve. raises if the curve is not periodic """ def Reverse(self) -> None: """ Changes the direction of parametrization of . The "FirstParameter" and the "LastParameter" are not changed but the orientation of the curve is modified. If the curve is bounded the StartPoint of the initial curve becomes the EndPoint of the reversed curve and the EndPoint of the initial curve becomes the StartPoint of the reversed curve. """ def Reversed(self) -> Geom2d_Curve: """ Creates a reversed duplicate Changes the orientation of this curve. The first and last parameters are not changed, but the parametric direction of the curve is reversed. If the curve is bounded: - the start point of the initial curve becomes the end point of the reversed curve, and - the end point of the initial curve becomes the start point of the reversed curve. - Reversed creates a new curve. """ def ReversedParameter(self,U : float) -> float: """ Computes the parameter on the reversed curve for the point of parameter U on this curve. Note: The point of parameter U on this curve is identical to the point of parameter ReversedParameter(U) on the reversed curve. """ def Rotate(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> None: """ Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. """ def Rotated(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> Geom2d_Geometry: """ None """ def Scale(self,P : OCP.gp.gp_Pnt2d,S : float) -> None: """ Scales a Geometry. S is the scaling value. """ def Scaled(self,P : OCP.gp.gp_Pnt2d,S : float) -> Geom2d_Geometry: """ None """ def StartPoint(self) -> OCP.gp.gp_Pnt2d: """ Returns the start point of the curve. The start point is the value of the curve for the "FirstParameter" of the curve. """ def This(self) -> OCP.Standard.Standard_Transient: """ Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. """ def Transform(self,T : OCP.gp.gp_Trsf2d) -> None: """ Transformation of a geometric object. This tansformation can be a translation, a rotation, a symmetry, a scaling or a complex transformation obtained by combination of the previous elementaries transformations. (see class Transformation of the package Geom2d). The following transformations have the same properties as the previous ones but they don't modified the object itself. A copy of the object is returned. """ def Transformed(self,T : OCP.gp.gp_Trsf2d) -> Geom2d_Geometry: """ None """ def TransformedParameter(self,U : float,T : OCP.gp.gp_Trsf2d) -> float: """ Computes the parameter on the curve transformed by T for the point of parameter U on this curve. Note: this function generally returns U but it can be redefined (for example, on a line). """ @overload def Translate(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> None: """ Translates a Geometry. V is the vector of the translation. Translates a Geometry from the point P1 to the point P2. """ @overload def Translate(self,V : OCP.gp.gp_Vec2d) -> None: ... @overload def Translated(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: """ None None """ @overload def Translated(self,V : OCP.gp.gp_Vec2d) -> Geom2d_Geometry: ... def Value(self,U : float) -> OCP.gp.gp_Pnt2d: """ Computes the point of parameter U on . If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. """ @staticmethod def get_type_descriptor_s() -> OCP.Standard.Standard_Type: """ None """ @staticmethod def get_type_name_s() -> str: """ None """ pass class Geom2d_BSplineCurve(Geom2d_BoundedCurve, Geom2d_Curve, Geom2d_Geometry, OCP.Standard.Standard_Transient): """ Describes a BSpline curve. A BSpline curve can be: - uniform or non-uniform, - rational or non-rational, - periodic or non-periodic. A BSpline curve is defined by: - its degree; the degree for a Geom2d_BSplineCurve is limited to a value (25) which is defined and controlled by the system. This value is returned by the function MaxDegree; - its periodic or non-periodic nature; - a table of poles (also called control points), with their associated weights if the BSpline curve is rational. The poles of the curve are "control points" used to deform the curve. If the curve is non-periodic, the first pole is the start point of the curve, and the last pole is the end point of the curve. The segment, which joins the first pole to the second pole, is the tangent to the curve at its start point, and the segment, which joins the last pole to the second-from-last pole, is the tangent to the curve at its end point. If the curve is periodic, these geometric properties are not verified. It is more difficult to give a geometric signification to the weights but they are useful for providing exact representations of the arcs of a circle or ellipse. Moreover, if the weights of all the poles are equal, the curve has a polynomial equation; it is therefore a non-rational curve. - a table of knots with their multiplicities. For a Geom2d_BSplineCurve, the table of knots is an increasing sequence of reals without repetition; the multiplicities define the repetition of the knots. A BSpline curve is a piecewise polynomial or rational curve. The knots are the parameters of junction points between two pieces. The multiplicity Mult(i) of the knot Knot(i) of the BSpline curve is related to the degree of continuity of the curve at the knot Knot(i), which is equal to Degree - Mult(i) where Degree is the degree of the BSpline curve. If the knots are regularly spaced (i.e. the difference between two consecutive knots is a constant), three specific and frequently used cases of knot distribution can be identified: - "uniform" if all multiplicities are equal to 1, - "quasi-uniform" if all multiplicities are equal to 1, except the first and the last knot which have a multiplicity of Degree + 1, where Degree is the degree of the BSpline curve, - "Piecewise Bezier" if all multiplicities are equal to Degree except the first and last knot which have a multiplicity of Degree + 1, where Degree is the degree of the BSpline curve. A curve of this type is a concatenation of arcs of Bezier curves. If the BSpline curve is not periodic: - the bounds of the Poles and Weights tables are 1 and NbPoles, where NbPoles is the number of poles of the BSpline curve, - the bounds of the Knots and Multiplicities tables are 1 and NbKnots, where NbKnots is the number of knots of the BSpline curve. If the BSpline curve is periodic, and if there are k periodic knots and p periodic poles, the period is: period = Knot(k + 1) - Knot(1) and the poles and knots tables can be considered as infinite tables, such that: - Knot(i+k) = Knot(i) + period - Pole(i+p) = Pole(i) Note: data structures of a periodic BSpline curve are more complex than those of a non-periodic one. Warnings : In this class we consider that a weight value is zero if Weight <= Resolution from package gp. For two parametric values (or two knot values) U1, U2 we consider that U1 = U2 if Abs (U2 - U1) <= Epsilon (U1). For two weights values W1, W2 we consider that W1 = W2 if Abs (W2 - W1) <= Epsilon (W1). The method Epsilon is defined in the class Real from package Standard.Describes a BSpline curve. A BSpline curve can be: - uniform or non-uniform, - rational or non-rational, - periodic or non-periodic. A BSpline curve is defined by: - its degree; the degree for a Geom2d_BSplineCurve is limited to a value (25) which is defined and controlled by the system. This value is returned by the function MaxDegree; - its periodic or non-periodic nature; - a table of poles (also called control points), with their associated weights if the BSpline curve is rational. The poles of the curve are "control points" used to deform the curve. If the curve is non-periodic, the first pole is the start point of the curve, and the last pole is the end point of the curve. The segment, which joins the first pole to the second pole, is the tangent to the curve at its start point, and the segment, which joins the last pole to the second-from-last pole, is the tangent to the curve at its end point. If the curve is periodic, these geometric properties are not verified. It is more difficult to give a geometric signification to the weights but they are useful for providing exact representations of the arcs of a circle or ellipse. Moreover, if the weights of all the poles are equal, the curve has a polynomial equation; it is therefore a non-rational curve. - a table of knots with their multiplicities. For a Geom2d_BSplineCurve, the table of knots is an increasing sequence of reals without repetition; the multiplicities define the repetition of the knots. A BSpline curve is a piecewise polynomial or rational curve. The knots are the parameters of junction points between two pieces. The multiplicity Mult(i) of the knot Knot(i) of the BSpline curve is related to the degree of continuity of the curve at the knot Knot(i), which is equal to Degree - Mult(i) where Degree is the degree of the BSpline curve. If the knots are regularly spaced (i.e. the difference between two consecutive knots is a constant), three specific and frequently used cases of knot distribution can be identified: - "uniform" if all multiplicities are equal to 1, - "quasi-uniform" if all multiplicities are equal to 1, except the first and the last knot which have a multiplicity of Degree + 1, where Degree is the degree of the BSpline curve, - "Piecewise Bezier" if all multiplicities are equal to Degree except the first and last knot which have a multiplicity of Degree + 1, where Degree is the degree of the BSpline curve. A curve of this type is a concatenation of arcs of Bezier curves. If the BSpline curve is not periodic: - the bounds of the Poles and Weights tables are 1 and NbPoles, where NbPoles is the number of poles of the BSpline curve, - the bounds of the Knots and Multiplicities tables are 1 and NbKnots, where NbKnots is the number of knots of the BSpline curve. If the BSpline curve is periodic, and if there are k periodic knots and p periodic poles, the period is: period = Knot(k + 1) - Knot(1) and the poles and knots tables can be considered as infinite tables, such that: - Knot(i+k) = Knot(i) + period - Pole(i+p) = Pole(i) Note: data structures of a periodic BSpline curve are more complex than those of a non-periodic one. Warnings : In this class we consider that a weight value is zero if Weight <= Resolution from package gp. For two parametric values (or two knot values) U1, U2 we consider that U1 = U2 if Abs (U2 - U1) <= Epsilon (U1). For two weights values W1, W2 we consider that W1 = W2 if Abs (W2 - W1) <= Epsilon (W1). The method Epsilon is defined in the class Real from package Standard.Describes a BSpline curve. A BSpline curve can be: - uniform or non-uniform, - rational or non-rational, - periodic or non-periodic. A BSpline curve is defined by: - its degree; the degree for a Geom2d_BSplineCurve is limited to a value (25) which is defined and controlled by the system. This value is returned by the function MaxDegree; - its periodic or non-periodic nature; - a table of poles (also called control points), with their associated weights if the BSpline curve is rational. The poles of the curve are "control points" used to deform the curve. If the curve is non-periodic, the first pole is the start point of the curve, and the last pole is the end point of the curve. The segment, which joins the first pole to the second pole, is the tangent to the curve at its start point, and the segment, which joins the last pole to the second-from-last pole, is the tangent to the curve at its end point. If the curve is periodic, these geometric properties are not verified. It is more difficult to give a geometric signification to the weights but they are useful for providing exact representations of the arcs of a circle or ellipse. Moreover, if the weights of all the poles are equal, the curve has a polynomial equation; it is therefore a non-rational curve. - a table of knots with their multiplicities. For a Geom2d_BSplineCurve, the table of knots is an increasing sequence of reals without repetition; the multiplicities define the repetition of the knots. A BSpline curve is a piecewise polynomial or rational curve. The knots are the parameters of junction points between two pieces. The multiplicity Mult(i) of the knot Knot(i) of the BSpline curve is related to the degree of continuity of the curve at the knot Knot(i), which is equal to Degree - Mult(i) where Degree is the degree of the BSpline curve. If the knots are regularly spaced (i.e. the difference between two consecutive knots is a constant), three specific and frequently used cases of knot distribution can be identified: - "uniform" if all multiplicities are equal to 1, - "quasi-uniform" if all multiplicities are equal to 1, except the first and the last knot which have a multiplicity of Degree + 1, where Degree is the degree of the BSpline curve, - "Piecewise Bezier" if all multiplicities are equal to Degree except the first and last knot which have a multiplicity of Degree + 1, where Degree is the degree of the BSpline curve. A curve of this type is a concatenation of arcs of Bezier curves. If the BSpline curve is not periodic: - the bounds of the Poles and Weights tables are 1 and NbPoles, where NbPoles is the number of poles of the BSpline curve, - the bounds of the Knots and Multiplicities tables are 1 and NbKnots, where NbKnots is the number of knots of the BSpline curve. If the BSpline curve is periodic, and if there are k periodic knots and p periodic poles, the period is: period = Knot(k + 1) - Knot(1) and the poles and knots tables can be considered as infinite tables, such that: - Knot(i+k) = Knot(i) + period - Pole(i+p) = Pole(i) Note: data structures of a periodic BSpline curve are more complex than those of a non-periodic one. Warnings : In this class we consider that a weight value is zero if Weight <= Resolution from package gp. For two parametric values (or two knot values) U1, U2 we consider that U1 = U2 if Abs (U2 - U1) <= Epsilon (U1). For two weights values W1, W2 we consider that W1 = W2 if Abs (W2 - W1) <= Epsilon (W1). The method Epsilon is defined in the class Real from package Standard. """ def Continuity(self) -> OCP.GeomAbs.GeomAbs_Shape: """ Returns the global continuity of the curve : C0 : only geometric continuity, C1 : continuity of the first derivative all along the Curve, C2 : continuity of the second derivative all along the Curve, C3 : continuity of the third derivative all along the Curve, CN : the order of continuity is infinite. For a B-spline curve of degree d if a knot Ui has a multiplicity p the B-spline curve is only Cd-p continuous at Ui. So the global continuity of the curve can't be greater than Cd-p where p is the maximum multiplicity of the interior Knots. In the interior of a knot span the curve is infinitely continuously differentiable. """ def Copy(self) -> Geom2d_Geometry: """ Creates a new object which is a copy of this BSpline curve. """ def D0(self,U : float,P : OCP.gp.gp_Pnt2d) -> None: """ None """ def D1(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d) -> None: """ Raised if the continuity of the curve is not C1. """ def D2(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d) -> None: """ Raised if the continuity of the curve is not C2. """ def D3(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d,V3 : OCP.gp.gp_Vec2d) -> None: """ For this BSpline curve, computes - the point P of parameter U, or - the point P and one or more of the following values: - V1, the first derivative vector, - V2, the second derivative vector, - V3, the third derivative vector. Warning On a point where the continuity of the curve is not the one requested, these functions impact the part defined by the parameter with a value greater than U, i.e. the part of the curve to the "right" of the singularity. Raises UndefinedDerivative if the continuity of the curve is not C3. """ def DN(self,U : float,N : int) -> OCP.gp.gp_Vec2d: """ For the point of parameter U of this BSpline curve, computes the vector corresponding to the Nth derivative. Warning On a point where the continuity of the curve is not the one requested, this function impacts the part defined by the parameter with a value greater than U, i.e. the part of the curve to the "right" of the singularity. Raises UndefinedDerivative if the continuity of the curve is not CN. RangeError if N < 1. The following functions computes the point of parameter U and the derivatives at this point on the B-spline curve arc defined between the knot FromK1 and the knot ToK2. U can be out of bounds [Knot (FromK1), Knot (ToK2)] but for the computation we only use the definition of the curve between these two knots. This method is useful to compute local derivative, if the order of continuity of the whole curve is not greater enough. Inside the parametric domain Knot (FromK1), Knot (ToK2) the evaluations are the same as if we consider the whole definition of the curve. Of course the evaluations are different outside this parametric domain. """ def DecrementRefCounter(self) -> int: """ Decrements the reference counter of this object; returns the decremented value """ def Degree(self) -> int: """ Returns the degree of this BSpline curve. In this class the degree of the basis normalized B-spline functions cannot be greater than "MaxDegree" Computation of value and derivatives """ def Delete(self) -> None: """ Memory deallocator for transient classes """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def DynamicType(self) -> OCP.Standard.Standard_Type: """ None """ def EndPoint(self) -> OCP.gp.gp_Pnt2d: """ Returns the last point of the curve. Warnings : The last point of the curve is different from the last pole of the curve if the multiplicity of the last knot is lower than Degree. """ def FirstParameter(self) -> float: """ Computes the parametric value of the start point of the curve. It is a knot value. """ def FirstUKnotIndex(self) -> int: """ For a B-spline curve the first parameter (which gives the start point of the curve) is a knot value but if the multiplicity of the first knot index is lower than Degree + 1 it is not the first knot of the curve. This method computes the index of the knot corresponding to the first parameter. """ def GetRefCount(self) -> int: """ Get the reference counter of this object """ def IncreaseDegree(self,Degree : int) -> None: """ Increases the degree of this BSpline curve to Degree. As a result, the poles, weights and multiplicities tables are modified; the knots table is not changed. Nothing is done if Degree is less than or equal to the current degree. Exceptions Standard_ConstructionError if Degree is greater than Geom2d_BSplineCurve::MaxDegree(). """ @overload def IncreaseMultiplicity(self,Index : int,M : int) -> None: """ Increases the multiplicity of the knot to . Increases the multiplicities of the knots in [I1,I2] to . """ @overload def IncreaseMultiplicity(self,I1 : int,I2 : int,M : int) -> None: ... def IncrementMultiplicity(self,I1 : int,I2 : int,M : int) -> None: """ Increases by M the multiplicity of the knots of indexes I1 to I2 in the knots table of this BSpline curve. For each knot, the resulting multiplicity is limited to the degree of this curve. If M is negative, nothing is done. As a result, the poles and weights tables of this BSpline curve are modified. Warning It is forbidden to modify the multiplicity of the first or last knot of a non-periodic curve. Be careful as Geom2d does not protect against this. Exceptions Standard_OutOfRange if I1 or I2 is outside the bounds of the knots table. """ def IncrementRefCounter(self) -> None: """ Increments the reference counter of this object """ def InsertKnot(self,U : float,M : int=1,ParametricTolerance : float=0.0) -> None: """ Inserts a knot value in the sequence of knots. If is an existing knot the multiplicity is increased by . """ def InsertKnots(self,Knots : OCP.TColStd.TColStd_Array1OfReal,Mults : OCP.TColStd.TColStd_Array1OfInteger,ParametricTolerance : float=0.0,Add : bool=False) -> None: """ Inserts the values of the array Knots, with the respective multiplicities given by the array Mults, into the knots table of this BSpline curve. If a value of the array Knots is an existing knot, its multiplicity is: - increased by M, if Add is true, or - increased to M, if Add is false (default value). The tolerance criterion used for knot equality is the larger of the values ParametricTolerance (defaulted to 0.) and Standard_Real::Epsilon(U), where U is the current knot value. Warning - For a value of the array Knots which is less than the first parameter or greater than the last parameter of this BSpline curve, nothing is done. - For a value of the array Mults which is negative or null, nothing is done. - The multiplicity of a knot is limited to the degree of this BSpline curve. """ def InsertPoleAfter(self,Index : int,P : OCP.gp.gp_Pnt2d,Weight : float=1.0) -> None: """ The new pole is inserted after the pole of range Index. If the curve was non rational it can become rational. """ def InsertPoleBefore(self,Index : int,P : OCP.gp.gp_Pnt2d,Weight : float=1.0) -> None: """ The new pole is inserted before the pole of range Index. If the curve was non rational it can become rational. """ def IsCN(self,N : int) -> bool: """ Returns true if the degree of continuity of this BSpline curve is at least N. A BSpline curve is at least GeomAbs_C0. Exceptions Standard_RangeError if N is negative. """ def IsClosed(self) -> bool: """ Returns true if the distance between the first point and the last point of the curve is lower or equal to Resolution from package gp. Warnings : The first and the last point can be different from the first pole and the last pole of the curve. """ def IsG1(self,theTf : float,theTl : float,theAngTol : float) -> bool: """ Check if curve has at least G1 continuity in interval [theTf, theTl] Returns true if IsCN(1) or angle between "left" and "right" first derivatives at knots with C0 continuity is less then theAngTol only knots in interval [theTf, theTl] is checked """ @overload def IsInstance(self,theType : OCP.Standard.Standard_Type) -> bool: """ Returns a true value if this is an instance of Type. Returns a true value if this is an instance of TypeName. """ @overload def IsInstance(self,theTypeName : str) -> bool: ... @overload def IsKind(self,theTypeName : str) -> bool: """ Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. """ @overload def IsKind(self,theType : OCP.Standard.Standard_Type) -> bool: ... def IsPeriodic(self) -> bool: """ Returns True if the curve is periodic. """ def IsRational(self) -> bool: """ Returns True if the weights are not identical. The tolerance criterion is Epsilon of the class Real. """ def Knot(self,Index : int) -> float: """ Returns the knot of range Index. When there is a knot with a multiplicity greater than 1 the knot is not repeated. The method Multiplicity can be used to get the multiplicity of the Knot. Raised if Index < 1 or Index > NbKnots """ def KnotDistribution(self) -> OCP.GeomAbs.GeomAbs_BSplKnotDistribution: """ Returns NonUniform or Uniform or QuasiUniform or PiecewiseBezier. If all the knots differ by a positive constant from the preceding knot the BSpline Curve can be : - Uniform if all the knots are of multiplicity 1, - QuasiUniform if all the knots are of multiplicity 1 except for the first and last knot which are of multiplicity Degree + 1, - PiecewiseBezier if the first and last knots have multiplicity Degree + 1 and if interior knots have multiplicity Degree A piecewise Bezier with only two knots is a BezierCurve. else the curve is non uniform. The tolerance criterion is Epsilon from class Real. """ @overload def KnotSequence(self,K : OCP.TColStd.TColStd_Array1OfReal) -> None: """ Returns the knots sequence. In this sequence the knots with a multiplicity greater than 1 are repeated. Example : K = {k1, k1, k1, k2, k3, k3, k4, k4, k4} Returns the knots sequence. In this sequence the knots with a multiplicity greater than 1 are repeated. Example : K = {k1, k1, k1, k2, k3, k3, k4, k4, k4} """ @overload def KnotSequence(self) -> OCP.TColStd.TColStd_Array1OfReal: ... @overload def Knots(self,K : OCP.TColStd.TColStd_Array1OfReal) -> None: """ returns the knot values of the B-spline curve; returns the knot values of the B-spline curve; """ @overload def Knots(self) -> OCP.TColStd.TColStd_Array1OfReal: ... def LastParameter(self) -> float: """ Computes the parametric value of the end point of the curve. It is a knot value. """ def LastUKnotIndex(self) -> int: """ For a BSpline curve the last parameter (which gives the end point of the curve) is a knot value but if the multiplicity of the last knot index is lower than Degree + 1 it is not the last knot of the curve. This method computes the index of the knot corresponding to the last parameter. """ def LocalD0(self,U : float,FromK1 : int,ToK2 : int,P : OCP.gp.gp_Pnt2d) -> None: """ Raised if FromK1 = ToK2. """ def LocalD1(self,U : float,FromK1 : int,ToK2 : int,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d) -> None: """ Raised if the local continuity of the curve is not C1 between the knot K1 and the knot K2. Raised if FromK1 = ToK2. """ def LocalD2(self,U : float,FromK1 : int,ToK2 : int,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d) -> None: """ Raised if the local continuity of the curve is not C2 between the knot K1 and the knot K2. Raised if FromK1 = ToK2. """ def LocalD3(self,U : float,FromK1 : int,ToK2 : int,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d,V3 : OCP.gp.gp_Vec2d) -> None: """ Raised if the local continuity of the curve is not C3 between the knot K1 and the knot K2. Raised if FromK1 = ToK2. """ def LocalDN(self,U : float,FromK1 : int,ToK2 : int,N : int) -> OCP.gp.gp_Vec2d: """ Raised if the local continuity of the curve is not CN between the knot K1 and the knot K2. Raised if FromK1 = ToK2. Raised if N < 1. """ def LocalValue(self,U : float,FromK1 : int,ToK2 : int) -> OCP.gp.gp_Pnt2d: """ Raised if FromK1 = ToK2. """ def LocateU(self,U : float,ParametricTolerance : float,WithKnotRepetition : bool=False) -> tuple[int, int]: """ Locates the parametric value U in the sequence of knots. If "WithKnotRepetition" is True we consider the knot's representation with repetition of multiple knot value, otherwise we consider the knot's representation with no repetition of multiple knot values. Knots (I1) <= U <= Knots (I2) . if I1 = I2 U is a knot value (the tolerance criterion ParametricTolerance is used). . if I1 < 1 => U < Knots (1) - Abs(ParametricTolerance) . if I2 > NbKnots => U > Knots (NbKnots) + Abs(ParametricTolerance) """ @staticmethod def MaxDegree_s() -> int: """ Returns the value of the maximum degree of the normalized B-spline basis functions in this package. """ @overload def Mirror(self,P : OCP.gp.gp_Pnt2d) -> None: """ Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirror(self,A : OCP.gp.gp_Ax2d) -> None: ... @overload def Mirrored(self,A : OCP.gp.gp_Ax2d) -> Geom2d_Geometry: """ None None """ @overload def Mirrored(self,P : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: ... def MovePoint(self,U : float,P : OCP.gp.gp_Pnt2d,Index1 : int,Index2 : int) -> tuple[int, int]: """ Moves the point of parameter U of this BSpline curve to P. Index1 and Index2 are the indexes in the table of poles of this BSpline curve of the first and last poles designated to be moved. FirstModifiedPole and LastModifiedPole are the indexes of the first and last poles, which are effectively modified. In the event of incompatibility between Index1, Index2 and the value U: - no change is made to this BSpline curve, and - the FirstModifiedPole and LastModifiedPole are returned null. Exceptions Standard_OutOfRange if: - Index1 is greater than or equal to Index2, or - Index1 or Index2 is less than 1 or greater than the number of poles of this BSpline curve. """ def MovePointAndTangent(self,U : float,P : OCP.gp.gp_Pnt2d,Tangent : OCP.gp.gp_Vec2d,Tolerance : float,StartingCondition : int,EndingCondition : int) -> tuple[int]: """ Move a point with parameter U to P. and makes it tangent at U be Tangent. StartingCondition = -1 means first can move EndingCondition = -1 means last point can move StartingCondition = 0 means the first point cannot move EndingCondition = 0 means the last point cannot move StartingCondition = 1 means the first point and tangent cannot move EndingCondition = 1 means the last point and tangent cannot move and so forth ErrorStatus != 0 means that there are not enough degree of freedom with the constrain to deform the curve accordingly """ @overload def Multiplicities(self,M : OCP.TColStd.TColStd_Array1OfInteger) -> None: """ Returns the multiplicity of the knots of the curve. returns the multiplicity of the knots of the curve. """ @overload def Multiplicities(self) -> OCP.TColStd.TColStd_Array1OfInteger: ... def Multiplicity(self,Index : int) -> int: """ Returns the multiplicity of the knots of range Index. Raised if Index < 1 or Index > NbKnots """ def NbKnots(self) -> int: """ Returns the number of knots. This method returns the number of knot without repetition of multiple knots. """ def NbPoles(self) -> int: """ Returns the number of poles """ def ParametricTransformation(self,T : OCP.gp.gp_Trsf2d) -> float: """ Returns the coefficient required to compute the parametric transformation of this curve when transformation T is applied. This coefficient is the ratio between the parameter of a point on this curve and the parameter of the transformed point on the new curve transformed by T. Note: this function generally returns 1. but it can be redefined (for example, on a line). """ def Period(self) -> float: """ Returns the period of this curve. raises if the curve is not periodic """ def PeriodicNormalization(self) -> tuple[float]: """ Computes the parameter normalized within the "first" period of this BSpline curve, if it is periodic: the returned value is in the range Param1 and Param1 + Period, where: - Param1 is the "first parameter", and - Period the period of this BSpline curve. Note: If this curve is not periodic, U is not modified. """ def Pole(self,Index : int) -> OCP.gp.gp_Pnt2d: """ Returns the pole of range Index. Raised if Index < 1 or Index > NbPoles. """ @overload def Poles(self) -> OCP.TColgp.TColgp_Array1OfPnt2d: """ Returns the poles of the B-spline curve; Returns the poles of the B-spline curve; """ @overload def Poles(self,P : OCP.TColgp.TColgp_Array1OfPnt2d) -> None: ... def RemoveKnot(self,Index : int,M : int,Tolerance : float) -> bool: """ Reduces the multiplicity of the knot of index Index to M. If M is equal to 0, the knot is removed. With a modification of this type, the array of poles is also modified. Two different algorithms are systematically used to compute the new poles of the curve. If, for each pole, the distance between the pole calculated using the first algorithm and the same pole calculated using the second algorithm, is less than Tolerance, this ensures that the curve is not modified by more than Tolerance. Under these conditions, true is returned; otherwise, false is returned. A low tolerance is used to prevent modification of the curve. A high tolerance is used to "smooth" the curve. Exceptions Standard_OutOfRange if Index is outside the bounds of the knots table. """ def RemovePole(self,Index : int) -> None: """ Removes the pole of range Index If the curve was rational it can become non rational. """ def Resolution(self,ToleranceUV : float) -> tuple[float]: """ Computes for this BSpline curve the parametric tolerance UTolerance for a given tolerance Tolerance3D (relative to dimensions in the plane). If f(t) is the equation of this BSpline curve, UTolerance ensures that: | t1 - t0| < Utolerance ===> |f(t1) - f(t0)| < ToleranceUV """ def Reverse(self) -> None: """ Reverses the orientation of this BSpline curve. As a result - the knots and poles tables are modified; - the start point of the initial curve becomes the end point of the reversed curve; - the end point of the initial curve becomes the start point of the reversed curve. """ def Reversed(self) -> Geom2d_Curve: """ Creates a reversed duplicate Changes the orientation of this curve. The first and last parameters are not changed, but the parametric direction of the curve is reversed. If the curve is bounded: - the start point of the initial curve becomes the end point of the reversed curve, and - the end point of the initial curve becomes the start point of the reversed curve. - Reversed creates a new curve. """ def ReversedParameter(self,U : float) -> float: """ Computes the parameter on the reversed curve for the point of parameter U on this BSpline curve. The returned value is: UFirst + ULast - U, where UFirst and ULast are the values of the first and last parameters of this BSpline curve. """ def Rotate(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> None: """ Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. """ def Rotated(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> Geom2d_Geometry: """ None """ def Scale(self,P : OCP.gp.gp_Pnt2d,S : float) -> None: """ Scales a Geometry. S is the scaling value. """ def Scaled(self,P : OCP.gp.gp_Pnt2d,S : float) -> Geom2d_Geometry: """ None """ def Segment(self,U1 : float,U2 : float,theTolerance : float=9.999999999999999e-10) -> None: """ Modifies this BSpline curve by segmenting it between U1 and U2. Either of these values can be outside the bounds of the curve, but U2 must be greater than U1. All data structure tables of this BSpline curve are modified, but the knots located between U1 and U2 are retained. The degree of the curve is not modified. """ @overload def SetKnot(self,Index : int,K : float) -> None: """ Modifies this BSpline curve by assigning the value K to the knot of index Index in the knots table. This is a relatively local modification because K must be such that: Knots(Index - 1) < K < Knots(Index + 1) Exceptions Standard_ConstructionError if: - K is not such that: Knots(Index - 1) < K < Knots(Index + 1) - M is greater than the degree of this BSpline curve or lower than the previous multiplicity of knot of index Index in the knots table. Standard_OutOfRange if Index is outside the bounds of the knots table. Modifies this BSpline curve by assigning the value K to the knot of index Index in the knots table. This is a relatively local modification because K must be such that: Knots(Index - 1) < K < Knots(Index + 1) The second syntax allows you also to increase the multiplicity of the knot to M (but it is not possible to decrease the multiplicity of the knot with this function). Exceptions Standard_ConstructionError if: - K is not such that: Knots(Index - 1) < K < Knots(Index + 1) - M is greater than the degree of this BSpline curve or lower than the previous multiplicity of knot of index Index in the knots table. Standard_OutOfRange if Index is outside the bounds of the knots table. """ @overload def SetKnot(self,Index : int,K : float,M : int) -> None: ... def SetKnots(self,K : OCP.TColStd.TColStd_Array1OfReal) -> None: """ Modifies this BSpline curve by assigning the array K to its knots table. The multiplicity of the knots is not modified. Exceptions Standard_ConstructionError if the values in the array K are not in ascending order. Standard_OutOfRange if the bounds of the array K are not respectively 1 and the number of knots of this BSpline curve. """ def SetNotPeriodic(self) -> None: """ Changes this BSpline curve into a non-periodic curve. If this curve is already non-periodic, it is not modified. Note that the poles and knots tables are modified. Warning If this curve is periodic, as the multiplicity of the first and last knots is not modified, and is not equal to Degree + 1, where Degree is the degree of this BSpline curve, the start and end points of the curve are not its first and last poles. """ def SetOrigin(self,Index : int) -> None: """ Assigns the knot of index Index in the knots table as the origin of this periodic BSpline curve. As a consequence, the knots and poles tables are modified. Exceptions Standard_NoSuchObject if this curve is not periodic. Standard_DomainError if Index is outside the bounds of the knots table. """ def SetPeriodic(self) -> None: """ Changes this BSpline curve into a periodic curve. To become periodic, the curve must first be closed. Next, the knot sequence must be periodic. For this, FirstUKnotIndex and LastUKnotIndex are used to compute I1 and I2, the indexes in the knots array of the knots corresponding to the first and last parameters of this BSpline curve. The period is therefore Knot(I2) - Knot(I1). Consequently, the knots and poles tables are modified. Exceptions Standard_ConstructionError if this BSpline curve is not closed. """ @overload def SetPole(self,Index : int,P : OCP.gp.gp_Pnt2d) -> None: """ Modifies this BSpline curve by assigning P to the pole of index Index in the poles table. Exceptions Standard_OutOfRange if Index is outside the bounds of the poles table. Standard_ConstructionError if Weight is negative or null. Modifies this BSpline curve by assigning P to the pole of index Index in the poles table. The second syntax also allows you to modify the weight of the modified pole, which becomes Weight. In this case, if this BSpline curve is non-rational, it can become rational and vice versa. Exceptions Standard_OutOfRange if Index is outside the bounds of the poles table. Standard_ConstructionError if Weight is negative or null. """ @overload def SetPole(self,Index : int,P : OCP.gp.gp_Pnt2d,Weight : float) -> None: ... def SetWeight(self,Index : int,Weight : float) -> None: """ Assigns the weight Weight to the pole of index Index of the poles table. If the curve was non rational it can become rational. If the curve was rational it can become non rational. Exceptions Standard_OutOfRange if Index is outside the bounds of the poles table. Standard_ConstructionError if Weight is negative or null. """ def StartPoint(self) -> OCP.gp.gp_Pnt2d: """ Returns the start point of the curve. Warnings : This point is different from the first pole of the curve if the multiplicity of the first knot is lower than Degree. """ def This(self) -> OCP.Standard.Standard_Transient: """ Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. """ def Transform(self,T : OCP.gp.gp_Trsf2d) -> None: """ Applies the transformation T to this BSpline curve. """ def Transformed(self,T : OCP.gp.gp_Trsf2d) -> Geom2d_Geometry: """ None """ def TransformedParameter(self,U : float,T : OCP.gp.gp_Trsf2d) -> float: """ Computes the parameter on the curve transformed by T for the point of parameter U on this curve. Note: this function generally returns U but it can be redefined (for example, on a line). """ @overload def Translate(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> None: """ Translates a Geometry. V is the vector of the translation. Translates a Geometry from the point P1 to the point P2. """ @overload def Translate(self,V : OCP.gp.gp_Vec2d) -> None: ... @overload def Translated(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: """ None None """ @overload def Translated(self,V : OCP.gp.gp_Vec2d) -> Geom2d_Geometry: ... def Value(self,U : float) -> OCP.gp.gp_Pnt2d: """ Computes the point of parameter U on . If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. """ def Weight(self,Index : int) -> float: """ Returns the weight of the pole of range Index . Raised if Index < 1 or Index > NbPoles. """ @overload def Weights(self) -> OCP.TColStd.TColStd_Array1OfReal: """ Returns the weights of the B-spline curve; Returns the weights of the B-spline curve; """ @overload def Weights(self,W : OCP.TColStd.TColStd_Array1OfReal) -> None: ... @overload def __init__(self,Poles : OCP.TColgp.TColgp_Array1OfPnt2d,Knots : OCP.TColStd.TColStd_Array1OfReal,Multiplicities : OCP.TColStd.TColStd_Array1OfInteger,Degree : int,Periodic : bool=False) -> None: ... @overload def __init__(self,Poles : OCP.TColgp.TColgp_Array1OfPnt2d,Weights : OCP.TColStd.TColStd_Array1OfReal,Knots : OCP.TColStd.TColStd_Array1OfReal,Multiplicities : OCP.TColStd.TColStd_Array1OfInteger,Degree : int,Periodic : bool=False) -> None: ... @staticmethod def get_type_descriptor_s() -> OCP.Standard.Standard_Type: """ None """ @staticmethod def get_type_name_s() -> str: """ None """ pass class Geom2d_Point(Geom2d_Geometry, OCP.Standard.Standard_Transient): """ The abstract class Point describes the common behavior of geometric points in 2D space. The Geom2d package also provides the concrete class Geom2d_CartesianPoint.The abstract class Point describes the common behavior of geometric points in 2D space. The Geom2d package also provides the concrete class Geom2d_CartesianPoint.The abstract class Point describes the common behavior of geometric points in 2D space. The Geom2d package also provides the concrete class Geom2d_CartesianPoint. """ def Coord(self) -> tuple[float, float]: """ returns the Coordinates of . """ def Copy(self) -> Geom2d_Geometry: """ None """ def DecrementRefCounter(self) -> int: """ Decrements the reference counter of this object; returns the decremented value """ def Delete(self) -> None: """ Memory deallocator for transient classes """ def Distance(self,Other : Geom2d_Point) -> float: """ computes the distance between and . """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def DynamicType(self) -> OCP.Standard.Standard_Type: """ None """ def GetRefCount(self) -> int: """ Get the reference counter of this object """ def IncrementRefCounter(self) -> None: """ Increments the reference counter of this object """ @overload def IsInstance(self,theType : OCP.Standard.Standard_Type) -> bool: """ Returns a true value if this is an instance of Type. Returns a true value if this is an instance of TypeName. """ @overload def IsInstance(self,theTypeName : str) -> bool: ... @overload def IsKind(self,theTypeName : str) -> bool: """ Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. """ @overload def IsKind(self,theType : OCP.Standard.Standard_Type) -> bool: ... @overload def Mirror(self,P : OCP.gp.gp_Pnt2d) -> None: """ Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirror(self,A : OCP.gp.gp_Ax2d) -> None: ... @overload def Mirrored(self,A : OCP.gp.gp_Ax2d) -> Geom2d_Geometry: """ None None """ @overload def Mirrored(self,P : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: ... def Pnt2d(self) -> OCP.gp.gp_Pnt2d: """ returns a non persistent copy of """ def Rotate(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> None: """ Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. """ def Rotated(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> Geom2d_Geometry: """ None """ def Scale(self,P : OCP.gp.gp_Pnt2d,S : float) -> None: """ Scales a Geometry. S is the scaling value. """ def Scaled(self,P : OCP.gp.gp_Pnt2d,S : float) -> Geom2d_Geometry: """ None """ def SquareDistance(self,Other : Geom2d_Point) -> float: """ computes the square distance between and . """ def This(self) -> OCP.Standard.Standard_Transient: """ Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. """ def Transform(self,T : OCP.gp.gp_Trsf2d) -> None: """ Transformation of a geometric object. This tansformation can be a translation, a rotation, a symmetry, a scaling or a complex transformation obtained by combination of the previous elementaries transformations. (see class Transformation of the package Geom2d). The following transformations have the same properties as the previous ones but they don't modified the object itself. A copy of the object is returned. """ def Transformed(self,T : OCP.gp.gp_Trsf2d) -> Geom2d_Geometry: """ None """ @overload def Translate(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> None: """ Translates a Geometry. V is the vector of the translation. Translates a Geometry from the point P1 to the point P2. """ @overload def Translate(self,V : OCP.gp.gp_Vec2d) -> None: ... @overload def Translated(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: """ None None """ @overload def Translated(self,V : OCP.gp.gp_Vec2d) -> Geom2d_Geometry: ... def X(self) -> float: """ returns the X coordinate of . """ def Y(self) -> float: """ returns the Y coordinate of . """ @staticmethod def get_type_descriptor_s() -> OCP.Standard.Standard_Type: """ None """ @staticmethod def get_type_name_s() -> str: """ None """ pass class Geom2d_Conic(Geom2d_Curve, Geom2d_Geometry, OCP.Standard.Standard_Transient): """ The abstract class Conic describes the common behavior of conic curves in 2D space and, in particular, their general characteristics. The Geom2d package provides four specific classes of conics: Geom2d_Circle, Geom2d_Ellipse, Geom2d_Hyperbola and Geom2d_Parabola. A conic is positioned in the plane with a coordinate system (gp_Ax22d object), where the origin is the center of the conic (or the apex in case of a parabola). This coordinate system is the local coordinate system of the conic. It gives the conic an explicit orientation, determining the direction in which the parameter increases along the conic. The "X Axis" of the local coordinate system also defines the origin of the parameter of the conic.The abstract class Conic describes the common behavior of conic curves in 2D space and, in particular, their general characteristics. The Geom2d package provides four specific classes of conics: Geom2d_Circle, Geom2d_Ellipse, Geom2d_Hyperbola and Geom2d_Parabola. A conic is positioned in the plane with a coordinate system (gp_Ax22d object), where the origin is the center of the conic (or the apex in case of a parabola). This coordinate system is the local coordinate system of the conic. It gives the conic an explicit orientation, determining the direction in which the parameter increases along the conic. The "X Axis" of the local coordinate system also defines the origin of the parameter of the conic.The abstract class Conic describes the common behavior of conic curves in 2D space and, in particular, their general characteristics. The Geom2d package provides four specific classes of conics: Geom2d_Circle, Geom2d_Ellipse, Geom2d_Hyperbola and Geom2d_Parabola. A conic is positioned in the plane with a coordinate system (gp_Ax22d object), where the origin is the center of the conic (or the apex in case of a parabola). This coordinate system is the local coordinate system of the conic. It gives the conic an explicit orientation, determining the direction in which the parameter increases along the conic. The "X Axis" of the local coordinate system also defines the origin of the parameter of the conic. """ def Continuity(self) -> OCP.GeomAbs.GeomAbs_Shape: """ Returns GeomAbs_CN which is the global continuity of any conic. """ def Copy(self) -> Geom2d_Geometry: """ None """ def D0(self,U : float,P : OCP.gp.gp_Pnt2d) -> None: """ Returns in P the point of parameter U. If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. """ def D1(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d) -> None: """ Returns the point P of parameter U and the first derivative V1. Raised if the continuity of the curve is not C1. """ def D2(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d) -> None: """ Returns the point P of parameter U, the first and second derivatives V1 and V2. Raised if the continuity of the curve is not C2. """ def D3(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d,V3 : OCP.gp.gp_Vec2d) -> None: """ Returns the point P of parameter U, the first, the second and the third derivative. Raised if the continuity of the curve is not C3. """ def DN(self,U : float,N : int) -> OCP.gp.gp_Vec2d: """ For the point of parameter U of this curve, computes the vector corresponding to the Nth derivative. Exceptions StdFail_UndefinedDerivative if: - the continuity of the curve is not "CN", or - the derivative vector cannot be computed easily; this is the case with specific types of curve (for example, a rational BSpline curve where N is greater than 3). Standard_RangeError if N is less than 1. """ def DecrementRefCounter(self) -> int: """ Decrements the reference counter of this object; returns the decremented value """ def Delete(self) -> None: """ Memory deallocator for transient classes """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def DynamicType(self) -> OCP.Standard.Standard_Type: """ None """ def Eccentricity(self) -> float: """ returns the eccentricity value of the conic e. e = 0 for a circle 0 < e < 1 for an ellipse (e = 0 if MajorRadius = MinorRadius) e > 1 for a hyperbola e = 1 for a parabola """ def FirstParameter(self) -> float: """ Returns the value of the first parameter. Warnings : It can be RealFirst or RealLast from package Standard if the curve is infinite """ def GetRefCount(self) -> int: """ Get the reference counter of this object """ def IncrementRefCounter(self) -> None: """ Increments the reference counter of this object """ def IsCN(self,N : int) -> bool: """ Returns True, the order of continuity of a conic is infinite. """ def IsClosed(self) -> bool: """ Returns true if the curve is closed. Examples : Some curves such as circle are always closed, others such as line are never closed (by definition). Some Curves such as OffsetCurve can be closed or not. These curves are considered as closed if the distance between the first point and the last point of the curve is lower or equal to the Resolution from package gp which is a fixed criterion independent of the application. """ @overload def IsInstance(self,theType : OCP.Standard.Standard_Type) -> bool: """ Returns a true value if this is an instance of Type. Returns a true value if this is an instance of TypeName. """ @overload def IsInstance(self,theTypeName : str) -> bool: ... @overload def IsKind(self,theTypeName : str) -> bool: """ Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. """ @overload def IsKind(self,theType : OCP.Standard.Standard_Type) -> bool: ... def IsPeriodic(self) -> bool: """ Returns true if the parameter of the curve is periodic. It is possible only if the curve is closed and if the following relation is satisfied : for each parametric value U the distance between the point P(u) and the point P (u + T) is lower or equal to Resolution from package gp, T is the period and must be a constant. There are three possibilities : . the curve is never periodic by definition (SegmentLine) . the curve is always periodic by definition (Circle) . the curve can be defined as periodic (BSpline). In this case a function SetPeriodic allows you to give the shape of the curve. The general rule for this case is : if a curve can be periodic or not the default periodicity set is non periodic and you have to turn (explicitly) the curve into a periodic curve if you want the curve to be periodic. """ def LastParameter(self) -> float: """ Value of the last parameter. Warnings : It can be RealFirst or RealLast from package Standard if the curve is infinite """ def Location(self) -> OCP.gp.gp_Pnt2d: """ Returns the location point of the conic. For the circle, the ellipse and the hyperbola it is the center of the conic. For the parabola it is the vertex of the parabola. """ @overload def Mirror(self,P : OCP.gp.gp_Pnt2d) -> None: """ Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirror(self,A : OCP.gp.gp_Ax2d) -> None: ... @overload def Mirrored(self,A : OCP.gp.gp_Ax2d) -> Geom2d_Geometry: """ None None """ @overload def Mirrored(self,P : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: ... def ParametricTransformation(self,T : OCP.gp.gp_Trsf2d) -> float: """ Returns the coefficient required to compute the parametric transformation of this curve when transformation T is applied. This coefficient is the ratio between the parameter of a point on this curve and the parameter of the transformed point on the new curve transformed by T. Note: this function generally returns 1. but it can be redefined (for example, on a line). """ def Period(self) -> float: """ Returns the period of this curve. raises if the curve is not periodic """ def Position(self) -> OCP.gp.gp_Ax22d: """ Returns the local coordinates system of the conic. """ def Reverse(self) -> None: """ Reverses the direction of parameterization of . The local coordinate system of the conic is modified. """ def Reversed(self) -> Geom2d_Curve: """ Creates a reversed duplicate Changes the orientation of this curve. The first and last parameters are not changed, but the parametric direction of the curve is reversed. If the curve is bounded: - the start point of the initial curve becomes the end point of the reversed curve, and - the end point of the initial curve becomes the start point of the reversed curve. - Reversed creates a new curve. """ def ReversedParameter(self,U : float) -> float: """ Returns the parameter on the reversed curve for the point of parameter U on . """ def Rotate(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> None: """ Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. """ def Rotated(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> Geom2d_Geometry: """ None """ def Scale(self,P : OCP.gp.gp_Pnt2d,S : float) -> None: """ Scales a Geometry. S is the scaling value. """ def Scaled(self,P : OCP.gp.gp_Pnt2d,S : float) -> Geom2d_Geometry: """ None """ def SetAxis(self,theA : OCP.gp.gp_Ax22d) -> None: """ Modifies this conic, redefining its local coordinate system partially, by assigning theA as its axis """ def SetLocation(self,theP : OCP.gp.gp_Pnt2d) -> None: """ Modifies this conic, redefining its local coordinate system partially, by assigning theP as its origin. """ def SetXAxis(self,theAX : OCP.gp.gp_Ax2d) -> None: """ Assigns the origin and unit vector of axis theA to the origin of the local coordinate system of this conic and X Direction. The other unit vector of the local coordinate system of this conic is recomputed normal to theA, without changing the orientation of the local coordinate system (right-handed or left-handed). """ def SetYAxis(self,theAY : OCP.gp.gp_Ax2d) -> None: """ Assigns the origin and unit vector of axis theA to the origin of the local coordinate system of this conic and Y Direction. The other unit vector of the local coordinate system of this conic is recomputed normal to theA, without changing the orientation of the local coordinate system (right-handed or left-handed). """ def This(self) -> OCP.Standard.Standard_Transient: """ Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. """ def Transform(self,T : OCP.gp.gp_Trsf2d) -> None: """ Transformation of a geometric object. This tansformation can be a translation, a rotation, a symmetry, a scaling or a complex transformation obtained by combination of the previous elementaries transformations. (see class Transformation of the package Geom2d). The following transformations have the same properties as the previous ones but they don't modified the object itself. A copy of the object is returned. """ def Transformed(self,T : OCP.gp.gp_Trsf2d) -> Geom2d_Geometry: """ None """ def TransformedParameter(self,U : float,T : OCP.gp.gp_Trsf2d) -> float: """ Computes the parameter on the curve transformed by T for the point of parameter U on this curve. Note: this function generally returns U but it can be redefined (for example, on a line). """ @overload def Translate(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> None: """ Translates a Geometry. V is the vector of the translation. Translates a Geometry from the point P1 to the point P2. """ @overload def Translate(self,V : OCP.gp.gp_Vec2d) -> None: ... @overload def Translated(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: """ None None """ @overload def Translated(self,V : OCP.gp.gp_Vec2d) -> Geom2d_Geometry: ... def Value(self,U : float) -> OCP.gp.gp_Pnt2d: """ Computes the point of parameter U on . If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. """ def XAxis(self) -> OCP.gp.gp_Ax2d: """ Returns the "XAxis" of the conic. This axis defines the origin of parametrization of the conic. This axis and the "Yaxis" define the local coordinate system of the conic. -C++: return const& """ def YAxis(self) -> OCP.gp.gp_Ax2d: """ Returns the "YAxis" of the conic. The "YAxis" is perpendicular to the "Xaxis". """ @staticmethod def get_type_descriptor_s() -> OCP.Standard.Standard_Type: """ None """ @staticmethod def get_type_name_s() -> str: """ None """ pass class Geom2d_Circle(Geom2d_Conic, Geom2d_Curve, Geom2d_Geometry, OCP.Standard.Standard_Transient): """ Describes a circle in the plane (2D space). A circle is defined by its radius and, as with any conic curve, is positioned in the plane with a coordinate system (gp_Ax22d object) where the origin is the center of the circle. The coordinate system is the local coordinate system of the circle. The orientation (direct or indirect) of the local coordinate system gives an explicit orientation to the circle, determining the direction in which the parameter increases along the circle. The Geom2d_Circle circle is parameterized by an angle: P(U) = O + R*Cos(U)*XDir + R*Sin(U)*YDir where: - P is the point of parameter U, - O, XDir and YDir are respectively the origin, "X Direction" and "Y Direction" of its local coordinate system, - R is the radius of the circle. The "X Axis" of the local coordinate system therefore defines the origin of the parameter of the circle. The parameter is the angle with this "X Direction". A circle is a closed and periodic curve. The period is 2.*Pi and the parameter range is [ 0,2.*Pi [. See Also GCE2d_MakeCircle which provides functions for more complex circle constructions gp_Ax22d and gp_Circ2d for an equivalent, non-parameterized data structure.Describes a circle in the plane (2D space). A circle is defined by its radius and, as with any conic curve, is positioned in the plane with a coordinate system (gp_Ax22d object) where the origin is the center of the circle. The coordinate system is the local coordinate system of the circle. The orientation (direct or indirect) of the local coordinate system gives an explicit orientation to the circle, determining the direction in which the parameter increases along the circle. The Geom2d_Circle circle is parameterized by an angle: P(U) = O + R*Cos(U)*XDir + R*Sin(U)*YDir where: - P is the point of parameter U, - O, XDir and YDir are respectively the origin, "X Direction" and "Y Direction" of its local coordinate system, - R is the radius of the circle. The "X Axis" of the local coordinate system therefore defines the origin of the parameter of the circle. The parameter is the angle with this "X Direction". A circle is a closed and periodic curve. The period is 2.*Pi and the parameter range is [ 0,2.*Pi [. See Also GCE2d_MakeCircle which provides functions for more complex circle constructions gp_Ax22d and gp_Circ2d for an equivalent, non-parameterized data structure.Describes a circle in the plane (2D space). A circle is defined by its radius and, as with any conic curve, is positioned in the plane with a coordinate system (gp_Ax22d object) where the origin is the center of the circle. The coordinate system is the local coordinate system of the circle. The orientation (direct or indirect) of the local coordinate system gives an explicit orientation to the circle, determining the direction in which the parameter increases along the circle. The Geom2d_Circle circle is parameterized by an angle: P(U) = O + R*Cos(U)*XDir + R*Sin(U)*YDir where: - P is the point of parameter U, - O, XDir and YDir are respectively the origin, "X Direction" and "Y Direction" of its local coordinate system, - R is the radius of the circle. The "X Axis" of the local coordinate system therefore defines the origin of the parameter of the circle. The parameter is the angle with this "X Direction". A circle is a closed and periodic curve. The period is 2.*Pi and the parameter range is [ 0,2.*Pi [. See Also GCE2d_MakeCircle which provides functions for more complex circle constructions gp_Ax22d and gp_Circ2d for an equivalent, non-parameterized data structure. """ def Circ2d(self) -> OCP.gp.gp_Circ2d: """ Returns the non persistent circle from gp with the same geometric properties as . """ def Continuity(self) -> OCP.GeomAbs.GeomAbs_Shape: """ Returns GeomAbs_CN which is the global continuity of any conic. """ def Copy(self) -> Geom2d_Geometry: """ Creates a new object which is a copy of this circle. """ def D0(self,U : float,P : OCP.gp.gp_Pnt2d) -> None: """ Returns in P the point of parameter U. P = C + R * Cos (U) * XDir + R * Sin (U) * YDir where C is the center of the circle , XDir the XDirection and YDir the YDirection of the circle's local coordinate system. """ def D1(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d) -> None: """ Returns the point P of parameter U and the first derivative V1. """ def D2(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d) -> None: """ Returns the point P of parameter U, the first and second derivatives V1 and V2. """ def D3(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d,V3 : OCP.gp.gp_Vec2d) -> None: """ Returns the point P of parameter u, the first second and third derivatives V1 V2 and V3. """ def DN(self,U : float,N : int) -> OCP.gp.gp_Vec2d: """ For the point of parameter U of this circle, computes the vector corresponding to the Nth derivative. Exceptions: Standard_RangeError if N is less than 1. """ def DecrementRefCounter(self) -> int: """ Decrements the reference counter of this object; returns the decremented value """ def Delete(self) -> None: """ Memory deallocator for transient classes """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def DynamicType(self) -> OCP.Standard.Standard_Type: """ None """ def Eccentricity(self) -> float: """ Returns 0., which is the eccentricity of any circle. """ def FirstParameter(self) -> float: """ Returns 0.0 """ def GetRefCount(self) -> int: """ Get the reference counter of this object """ def IncrementRefCounter(self) -> None: """ Increments the reference counter of this object """ def IsCN(self,N : int) -> bool: """ Returns True, the order of continuity of a conic is infinite. """ def IsClosed(self) -> bool: """ returns True. """ @overload def IsInstance(self,theType : OCP.Standard.Standard_Type) -> bool: """ Returns a true value if this is an instance of Type. Returns a true value if this is an instance of TypeName. """ @overload def IsInstance(self,theTypeName : str) -> bool: ... @overload def IsKind(self,theTypeName : str) -> bool: """ Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. """ @overload def IsKind(self,theType : OCP.Standard.Standard_Type) -> bool: ... def IsPeriodic(self) -> bool: """ returns True. The period of a circle is 2.*Pi. """ def LastParameter(self) -> float: """ Returns 2*PI. """ def Location(self) -> OCP.gp.gp_Pnt2d: """ Returns the location point of the conic. For the circle, the ellipse and the hyperbola it is the center of the conic. For the parabola it is the vertex of the parabola. """ @overload def Mirror(self,P : OCP.gp.gp_Pnt2d) -> None: """ Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirror(self,A : OCP.gp.gp_Ax2d) -> None: ... @overload def Mirrored(self,A : OCP.gp.gp_Ax2d) -> Geom2d_Geometry: """ None None """ @overload def Mirrored(self,P : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: ... def ParametricTransformation(self,T : OCP.gp.gp_Trsf2d) -> float: """ Returns the coefficient required to compute the parametric transformation of this curve when transformation T is applied. This coefficient is the ratio between the parameter of a point on this curve and the parameter of the transformed point on the new curve transformed by T. Note: this function generally returns 1. but it can be redefined (for example, on a line). """ def Period(self) -> float: """ Returns the period of this curve. raises if the curve is not periodic """ def Position(self) -> OCP.gp.gp_Ax22d: """ Returns the local coordinates system of the conic. """ def Radius(self) -> float: """ Returns the radius of this circle. """ def Reverse(self) -> None: """ Reverses the direction of parameterization of . The local coordinate system of the conic is modified. """ def Reversed(self) -> Geom2d_Curve: """ Creates a reversed duplicate Changes the orientation of this curve. The first and last parameters are not changed, but the parametric direction of the curve is reversed. If the curve is bounded: - the start point of the initial curve becomes the end point of the reversed curve, and - the end point of the initial curve becomes the start point of the reversed curve. - Reversed creates a new curve. """ def ReversedParameter(self,U : float) -> float: """ Computes the parameter on the reversed circle for the point of parameter U on this circle. For a circle, the returned value is: 2.*Pi - U. """ def Rotate(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> None: """ Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. """ def Rotated(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> Geom2d_Geometry: """ None """ def Scale(self,P : OCP.gp.gp_Pnt2d,S : float) -> None: """ Scales a Geometry. S is the scaling value. """ def Scaled(self,P : OCP.gp.gp_Pnt2d,S : float) -> Geom2d_Geometry: """ None """ def SetAxis(self,theA : OCP.gp.gp_Ax22d) -> None: """ Modifies this conic, redefining its local coordinate system partially, by assigning theA as its axis """ def SetCirc2d(self,C : OCP.gp.gp_Circ2d) -> None: """ Converts the gp_Circ2d circle C into this circle. """ def SetLocation(self,theP : OCP.gp.gp_Pnt2d) -> None: """ Modifies this conic, redefining its local coordinate system partially, by assigning theP as its origin. """ def SetRadius(self,R : float) -> None: """ None """ def SetXAxis(self,theAX : OCP.gp.gp_Ax2d) -> None: """ Assigns the origin and unit vector of axis theA to the origin of the local coordinate system of this conic and X Direction. The other unit vector of the local coordinate system of this conic is recomputed normal to theA, without changing the orientation of the local coordinate system (right-handed or left-handed). """ def SetYAxis(self,theAY : OCP.gp.gp_Ax2d) -> None: """ Assigns the origin and unit vector of axis theA to the origin of the local coordinate system of this conic and Y Direction. The other unit vector of the local coordinate system of this conic is recomputed normal to theA, without changing the orientation of the local coordinate system (right-handed or left-handed). """ def This(self) -> OCP.Standard.Standard_Transient: """ Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. """ def Transform(self,T : OCP.gp.gp_Trsf2d) -> None: """ Applies the transformation T to this circle. """ def Transformed(self,T : OCP.gp.gp_Trsf2d) -> Geom2d_Geometry: """ None """ def TransformedParameter(self,U : float,T : OCP.gp.gp_Trsf2d) -> float: """ Computes the parameter on the curve transformed by T for the point of parameter U on this curve. Note: this function generally returns U but it can be redefined (for example, on a line). """ @overload def Translate(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> None: """ Translates a Geometry. V is the vector of the translation. Translates a Geometry from the point P1 to the point P2. """ @overload def Translate(self,V : OCP.gp.gp_Vec2d) -> None: ... @overload def Translated(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: """ None None """ @overload def Translated(self,V : OCP.gp.gp_Vec2d) -> Geom2d_Geometry: ... def Value(self,U : float) -> OCP.gp.gp_Pnt2d: """ Computes the point of parameter U on . If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. """ def XAxis(self) -> OCP.gp.gp_Ax2d: """ Returns the "XAxis" of the conic. This axis defines the origin of parametrization of the conic. This axis and the "Yaxis" define the local coordinate system of the conic. -C++: return const& """ def YAxis(self) -> OCP.gp.gp_Ax2d: """ Returns the "YAxis" of the conic. The "YAxis" is perpendicular to the "Xaxis". """ @overload def __init__(self,A : OCP.gp.gp_Ax22d,Radius : float) -> None: ... @overload def __init__(self,A : OCP.gp.gp_Ax2d,Radius : float,Sense : bool=True) -> None: ... @overload def __init__(self,C : OCP.gp.gp_Circ2d) -> None: ... @staticmethod def get_type_descriptor_s() -> OCP.Standard.Standard_Type: """ None """ @staticmethod def get_type_name_s() -> str: """ None """ pass class Geom2d_BezierCurve(Geom2d_BoundedCurve, Geom2d_Curve, Geom2d_Geometry, OCP.Standard.Standard_Transient): """ Describes a rational or non-rational Bezier curve - a non-rational Bezier curve is defined by a table of poles (also called control points), - a rational Bezier curve is defined by a table of poles with varying weights. These data are manipulated by two parallel arrays: - the poles table, which is an array of gp_Pnt2d points, and - the weights table, which is an array of reals. The bounds of these arrays are 1 and "the number of poles" of the curve. The poles of the curve are "control points" used to deform the curve. The first pole is the start point of the curve, and the last pole is the end point of the curve. The segment which joins the first pole to the second pole is the tangent to the curve at its start point, and the segment which joins the last pole to the second-from-last pole is the tangent to the curve at its end point. It is more difficult to give a geometric signification to the weights but they are useful for providing exact representations of the arcs of a circle or ellipse. Moreover, if the weights of all the poles are equal, the curve is polynomial; it is therefore a non-rational curve. The non-rational curve is a special and frequently used case. The weights are defined and used only in case of a rational curve. The degree of a Bezier curve is equal to the number of poles, minus 1. It must be greater than or equal to 1. However, the degree of a Geom2d_BezierCurve curve is limited to a value (25) which is defined and controlled by the system. This value is returned by the function MaxDegree. The parameter range for a Bezier curve is [ 0, 1 ]. If the first and last control points of the Bezier curve are the same point then the curve is closed. For example, to create a closed Bezier curve with four control points, you have to give a set of control points P1, P2, P3 and P1. The continuity of a Bezier curve is infinite. It is not possible to build a Bezier curve with negative weights. We consider that a weight value is zero if it is less than or equal to gp::Resolution(). We also consider that two weight values W1 and W2 are equal if: |W2 - W1| <= gp::Resolution(). Warning - When considering the continuity of a closed Bezier curve at the junction point, remember that a curve of this type is never periodic. This means that the derivatives for the parameter u = 0 have no reason to be the same as the derivatives for the parameter u = 1 even if the curve is closed. - The length of a Bezier curve can be null.Describes a rational or non-rational Bezier curve - a non-rational Bezier curve is defined by a table of poles (also called control points), - a rational Bezier curve is defined by a table of poles with varying weights. These data are manipulated by two parallel arrays: - the poles table, which is an array of gp_Pnt2d points, and - the weights table, which is an array of reals. The bounds of these arrays are 1 and "the number of poles" of the curve. The poles of the curve are "control points" used to deform the curve. The first pole is the start point of the curve, and the last pole is the end point of the curve. The segment which joins the first pole to the second pole is the tangent to the curve at its start point, and the segment which joins the last pole to the second-from-last pole is the tangent to the curve at its end point. It is more difficult to give a geometric signification to the weights but they are useful for providing exact representations of the arcs of a circle or ellipse. Moreover, if the weights of all the poles are equal, the curve is polynomial; it is therefore a non-rational curve. The non-rational curve is a special and frequently used case. The weights are defined and used only in case of a rational curve. The degree of a Bezier curve is equal to the number of poles, minus 1. It must be greater than or equal to 1. However, the degree of a Geom2d_BezierCurve curve is limited to a value (25) which is defined and controlled by the system. This value is returned by the function MaxDegree. The parameter range for a Bezier curve is [ 0, 1 ]. If the first and last control points of the Bezier curve are the same point then the curve is closed. For example, to create a closed Bezier curve with four control points, you have to give a set of control points P1, P2, P3 and P1. The continuity of a Bezier curve is infinite. It is not possible to build a Bezier curve with negative weights. We consider that a weight value is zero if it is less than or equal to gp::Resolution(). We also consider that two weight values W1 and W2 are equal if: |W2 - W1| <= gp::Resolution(). Warning - When considering the continuity of a closed Bezier curve at the junction point, remember that a curve of this type is never periodic. This means that the derivatives for the parameter u = 0 have no reason to be the same as the derivatives for the parameter u = 1 even if the curve is closed. - The length of a Bezier curve can be null.Describes a rational or non-rational Bezier curve - a non-rational Bezier curve is defined by a table of poles (also called control points), - a rational Bezier curve is defined by a table of poles with varying weights. These data are manipulated by two parallel arrays: - the poles table, which is an array of gp_Pnt2d points, and - the weights table, which is an array of reals. The bounds of these arrays are 1 and "the number of poles" of the curve. The poles of the curve are "control points" used to deform the curve. The first pole is the start point of the curve, and the last pole is the end point of the curve. The segment which joins the first pole to the second pole is the tangent to the curve at its start point, and the segment which joins the last pole to the second-from-last pole is the tangent to the curve at its end point. It is more difficult to give a geometric signification to the weights but they are useful for providing exact representations of the arcs of a circle or ellipse. Moreover, if the weights of all the poles are equal, the curve is polynomial; it is therefore a non-rational curve. The non-rational curve is a special and frequently used case. The weights are defined and used only in case of a rational curve. The degree of a Bezier curve is equal to the number of poles, minus 1. It must be greater than or equal to 1. However, the degree of a Geom2d_BezierCurve curve is limited to a value (25) which is defined and controlled by the system. This value is returned by the function MaxDegree. The parameter range for a Bezier curve is [ 0, 1 ]. If the first and last control points of the Bezier curve are the same point then the curve is closed. For example, to create a closed Bezier curve with four control points, you have to give a set of control points P1, P2, P3 and P1. The continuity of a Bezier curve is infinite. It is not possible to build a Bezier curve with negative weights. We consider that a weight value is zero if it is less than or equal to gp::Resolution(). We also consider that two weight values W1 and W2 are equal if: |W2 - W1| <= gp::Resolution(). Warning - When considering the continuity of a closed Bezier curve at the junction point, remember that a curve of this type is never periodic. This means that the derivatives for the parameter u = 0 have no reason to be the same as the derivatives for the parameter u = 1 even if the curve is closed. - The length of a Bezier curve can be null. """ def Continuity(self) -> OCP.GeomAbs.GeomAbs_Shape: """ Returns GeomAbs_CN, which is the continuity of any Bezier curve. """ def Copy(self) -> Geom2d_Geometry: """ Creates a new object which is a copy of this Bezier curve. """ def D0(self,U : float,P : OCP.gp.gp_Pnt2d) -> None: """ None """ def D1(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d) -> None: """ None """ def D2(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d) -> None: """ None """ def D3(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d,V3 : OCP.gp.gp_Vec2d) -> None: """ None """ def DN(self,U : float,N : int) -> OCP.gp.gp_Vec2d: """ For this Bezier curve, computes - the point P of parameter U, or - the point P and one or more of the following values: - V1, the first derivative vector, - V2, the second derivative vector, - V3, the third derivative vector. Note: the parameter U can be outside the bounds of the curve. Raises RangeError if N < 1. """ def DecrementRefCounter(self) -> int: """ Decrements the reference counter of this object; returns the decremented value """ def Degree(self) -> int: """ Returns the polynomial degree of the curve. It is the number of poles less one. In this package the Degree of a Bezier curve cannot be greater than "MaxDegree". """ def Delete(self) -> None: """ Memory deallocator for transient classes """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def DynamicType(self) -> OCP.Standard.Standard_Type: """ None """ def EndPoint(self) -> OCP.gp.gp_Pnt2d: """ Returns the end point or start point of this Bezier curve. """ def FirstParameter(self) -> float: """ Returns the value of the first parameter of this Bezier curve. This is 0.0, which gives the start point of this Bezier curve. """ def GetRefCount(self) -> int: """ Get the reference counter of this object """ def Increase(self,Degree : int) -> None: """ Increases the degree of a bezier curve. Degree is the new degree of . raises ConstructionError if Degree is greater than MaxDegree or lower than 2 or lower than the initial degree of . """ def IncrementRefCounter(self) -> None: """ Increments the reference counter of this object """ def InsertPoleAfter(self,Index : int,P : OCP.gp.gp_Pnt2d,Weight : float=1.0) -> None: """ Inserts a pole with its weight in the set of poles after the pole of range Index. If the curve was non rational it can become rational if all the weights are not identical. Raised if Index is not in the range [0, NbPoles] """ def InsertPoleBefore(self,Index : int,P : OCP.gp.gp_Pnt2d,Weight : float=1.0) -> None: """ Inserts a pole with its weight in the set of poles after the pole of range Index. If the curve was non rational it can become rational if all the weights are not identical. Raised if Index is not in the range [1, NbPoles+1] """ def IsCN(self,N : int) -> bool: """ Continuity of the curve, returns True. """ def IsClosed(self) -> bool: """ Returns True if the distance between the first point and the last point of the curve is lower or equal to the Resolution from package gp. """ @overload def IsInstance(self,theType : OCP.Standard.Standard_Type) -> bool: """ Returns a true value if this is an instance of Type. Returns a true value if this is an instance of TypeName. """ @overload def IsInstance(self,theTypeName : str) -> bool: ... @overload def IsKind(self,theTypeName : str) -> bool: """ Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. """ @overload def IsKind(self,theType : OCP.Standard.Standard_Type) -> bool: ... def IsPeriodic(self) -> bool: """ Returns False. A BezierCurve cannot be periodic in this package """ def IsRational(self) -> bool: """ Returns false if all the weights are identical. The tolerance criterion is Resolution from package gp. """ def LastParameter(self) -> float: """ Returns the value of the last parameter of this Bezier curve. This is 1.0, which gives the end point of this Bezier curve. """ @staticmethod def MaxDegree_s() -> int: """ Returns the value of the maximum polynomial degree of a BezierCurve. This value is 25. """ @overload def Mirror(self,P : OCP.gp.gp_Pnt2d) -> None: """ Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirror(self,A : OCP.gp.gp_Ax2d) -> None: ... @overload def Mirrored(self,A : OCP.gp.gp_Ax2d) -> Geom2d_Geometry: """ None None """ @overload def Mirrored(self,P : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: ... def NbPoles(self) -> int: """ Returns the number of poles for this Bezier curve. """ def ParametricTransformation(self,T : OCP.gp.gp_Trsf2d) -> float: """ Returns the coefficient required to compute the parametric transformation of this curve when transformation T is applied. This coefficient is the ratio between the parameter of a point on this curve and the parameter of the transformed point on the new curve transformed by T. Note: this function generally returns 1. but it can be redefined (for example, on a line). """ def Period(self) -> float: """ Returns the period of this curve. raises if the curve is not periodic """ def Pole(self,Index : int) -> OCP.gp.gp_Pnt2d: """ Returns the pole of range Index. Raised if Index is not in the range [1, NbPoles] """ @overload def Poles(self) -> OCP.TColgp.TColgp_Array1OfPnt2d: """ Returns all the poles of the curve. Returns all the poles of the curve. """ @overload def Poles(self,P : OCP.TColgp.TColgp_Array1OfPnt2d) -> None: ... def RemovePole(self,Index : int) -> None: """ Removes the pole of range Index. If the curve was rational it can become non rational. Raised if Index is not in the range [1, NbPoles] """ def Resolution(self,ToleranceUV : float) -> tuple[float]: """ Computes for this Bezier curve the parametric tolerance UTolerance for a given tolerance Tolerance3D (relative to dimensions in the plane). If f(t) is the equation of this Bezier curve, UTolerance ensures that | t1 - t0| < Utolerance ===> |f(t1) - f(t0)| < ToleranceUV """ def Reverse(self) -> None: """ Reverses the direction of parametrization of Value (NewU) = Value (1 - OldU) """ def Reversed(self) -> Geom2d_Curve: """ Creates a reversed duplicate Changes the orientation of this curve. The first and last parameters are not changed, but the parametric direction of the curve is reversed. If the curve is bounded: - the start point of the initial curve becomes the end point of the reversed curve, and - the end point of the initial curve becomes the start point of the reversed curve. - Reversed creates a new curve. """ def ReversedParameter(self,U : float) -> float: """ Returns the parameter on the reversed curve for the point of parameter U on . """ def Rotate(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> None: """ Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. """ def Rotated(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> Geom2d_Geometry: """ None """ def Scale(self,P : OCP.gp.gp_Pnt2d,S : float) -> None: """ Scales a Geometry. S is the scaling value. """ def Scaled(self,P : OCP.gp.gp_Pnt2d,S : float) -> Geom2d_Geometry: """ None """ def Segment(self,U1 : float,U2 : float) -> None: """ Segments the curve between U1 and U2 which can be out of the bounds of the curve. The curve is oriented from U1 to U2. The control points are modified, the first and the last point are not the same but the parametrization range is [0, 1] else it could not be a Bezier curve. Warnings : Even if is not closed it can become closed after the segmentation for example if U1 or U2 are out of the bounds of the curve or if the curve makes loop. After the segmentation the length of a curve can be null. """ @overload def SetPole(self,Index : int,P : OCP.gp.gp_Pnt2d,Weight : float) -> None: """ Substitutes the pole of range index with P. If the curve is rational the weight of range Index is not modified. raiseD if Index is not in the range [1, NbPoles] Substitutes the pole and the weights of range Index. If the curve is not rational it can become rational if all the weights are not identical. If the curve was rational it can become non rational if all the weights are identical. Raised if Index is not in the range [1, NbPoles] Raised if Weight <= Resolution from package gp """ @overload def SetPole(self,Index : int,P : OCP.gp.gp_Pnt2d) -> None: ... def SetWeight(self,Index : int,Weight : float) -> None: """ Changes the weight of the pole of range Index. If the curve is not rational it can become rational if all the weights are not identical. If the curve was rational it can become non rational if all the weights are identical. Raised if Index is not in the range [1, NbPoles] Raised if Weight <= Resolution from package gp """ def StartPoint(self) -> OCP.gp.gp_Pnt2d: """ Returns Value (U=1), it is the first control point of the curve. """ def This(self) -> OCP.Standard.Standard_Transient: """ Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. """ def Transform(self,T : OCP.gp.gp_Trsf2d) -> None: """ Applies the transformation T to this Bezier curve. """ def Transformed(self,T : OCP.gp.gp_Trsf2d) -> Geom2d_Geometry: """ None """ def TransformedParameter(self,U : float,T : OCP.gp.gp_Trsf2d) -> float: """ Computes the parameter on the curve transformed by T for the point of parameter U on this curve. Note: this function generally returns U but it can be redefined (for example, on a line). """ @overload def Translate(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> None: """ Translates a Geometry. V is the vector of the translation. Translates a Geometry from the point P1 to the point P2. """ @overload def Translate(self,V : OCP.gp.gp_Vec2d) -> None: ... @overload def Translated(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: """ None None """ @overload def Translated(self,V : OCP.gp.gp_Vec2d) -> Geom2d_Geometry: ... def Value(self,U : float) -> OCP.gp.gp_Pnt2d: """ Computes the point of parameter U on . If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. """ def Weight(self,Index : int) -> float: """ Returns the weight of range Index. Raised if Index is not in the range [1, NbPoles] """ @overload def Weights(self) -> OCP.TColStd.TColStd_Array1OfReal: """ Returns all the weights of the curve. Returns all the weights of the curve. """ @overload def Weights(self,W : OCP.TColStd.TColStd_Array1OfReal) -> None: ... @overload def __init__(self,CurvePoles : OCP.TColgp.TColgp_Array1OfPnt2d) -> None: ... @overload def __init__(self,CurvePoles : OCP.TColgp.TColgp_Array1OfPnt2d,PoleWeights : OCP.TColStd.TColStd_Array1OfReal) -> None: ... @staticmethod def get_type_descriptor_s() -> OCP.Standard.Standard_Type: """ None """ @staticmethod def get_type_name_s() -> str: """ None """ pass class Geom2d_Vector(Geom2d_Geometry, OCP.Standard.Standard_Transient): """ The abstract class Vector describes the common behavior of vectors in 2D space. The Geom2d package provides two concrete classes of vectors: Geom2d_Direction (unit vector) and Geom2d_VectorWithMagnitude.The abstract class Vector describes the common behavior of vectors in 2D space. The Geom2d package provides two concrete classes of vectors: Geom2d_Direction (unit vector) and Geom2d_VectorWithMagnitude.The abstract class Vector describes the common behavior of vectors in 2D space. The Geom2d package provides two concrete classes of vectors: Geom2d_Direction (unit vector) and Geom2d_VectorWithMagnitude. """ def Angle(self,Other : Geom2d_Vector) -> float: """ Computes the angular value, in radians, between this vector and vector Other. The result is a value between -Pi and Pi. The orientation is from this vector to vector Other. Raises VectorWithNullMagnitude if one of the two vectors is a vector with null magnitude because the angular value is indefinite. """ def Coord(self) -> tuple[float, float]: """ Returns the coordinates of . """ def Copy(self) -> Geom2d_Geometry: """ None """ def Crossed(self,Other : Geom2d_Vector) -> float: """ Cross product of with the vector . """ def DecrementRefCounter(self) -> int: """ Decrements the reference counter of this object; returns the decremented value """ def Delete(self) -> None: """ Memory deallocator for transient classes """ def Dot(self,Other : Geom2d_Vector) -> float: """ Returns the scalar product of 2 Vectors. """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def DynamicType(self) -> OCP.Standard.Standard_Type: """ None """ def GetRefCount(self) -> int: """ Get the reference counter of this object """ def IncrementRefCounter(self) -> None: """ Increments the reference counter of this object """ @overload def IsInstance(self,theType : OCP.Standard.Standard_Type) -> bool: """ Returns a true value if this is an instance of Type. Returns a true value if this is an instance of TypeName. """ @overload def IsInstance(self,theTypeName : str) -> bool: ... @overload def IsKind(self,theTypeName : str) -> bool: """ Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. """ @overload def IsKind(self,theType : OCP.Standard.Standard_Type) -> bool: ... def Magnitude(self) -> float: """ Returns the Magnitude of . """ @overload def Mirror(self,P : OCP.gp.gp_Pnt2d) -> None: """ Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirror(self,A : OCP.gp.gp_Ax2d) -> None: ... @overload def Mirrored(self,A : OCP.gp.gp_Ax2d) -> Geom2d_Geometry: """ None None """ @overload def Mirrored(self,P : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: ... def Reverse(self) -> None: """ Reverses the vector . """ def Reversed(self) -> Geom2d_Vector: """ Returns a copy of reversed. """ def Rotate(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> None: """ Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. """ def Rotated(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> Geom2d_Geometry: """ None """ def Scale(self,P : OCP.gp.gp_Pnt2d,S : float) -> None: """ Scales a Geometry. S is the scaling value. """ def Scaled(self,P : OCP.gp.gp_Pnt2d,S : float) -> Geom2d_Geometry: """ None """ def SquareMagnitude(self) -> float: """ Returns the square magnitude of . """ def This(self) -> OCP.Standard.Standard_Transient: """ Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. """ def Transform(self,T : OCP.gp.gp_Trsf2d) -> None: """ Transformation of a geometric object. This tansformation can be a translation, a rotation, a symmetry, a scaling or a complex transformation obtained by combination of the previous elementaries transformations. (see class Transformation of the package Geom2d). The following transformations have the same properties as the previous ones but they don't modified the object itself. A copy of the object is returned. """ def Transformed(self,T : OCP.gp.gp_Trsf2d) -> Geom2d_Geometry: """ None """ @overload def Translate(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> None: """ Translates a Geometry. V is the vector of the translation. Translates a Geometry from the point P1 to the point P2. """ @overload def Translate(self,V : OCP.gp.gp_Vec2d) -> None: ... @overload def Translated(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: """ None None """ @overload def Translated(self,V : OCP.gp.gp_Vec2d) -> Geom2d_Geometry: ... def Vec2d(self) -> OCP.gp.gp_Vec2d: """ Returns a non persistent copy of . """ def X(self) -> float: """ Returns the X coordinate of . """ def Y(self) -> float: """ Returns the Y coordinate of . """ @staticmethod def get_type_descriptor_s() -> OCP.Standard.Standard_Type: """ None """ @staticmethod def get_type_name_s() -> str: """ None """ pass class Geom2d_Ellipse(Geom2d_Conic, Geom2d_Curve, Geom2d_Geometry, OCP.Standard.Standard_Transient): """ Describes an ellipse in the plane (2D space). An ellipse is defined by its major and minor radii and, as with any conic curve, is positioned in the plane with a coordinate system (gp_Ax22d object) where: - the origin is the center of the ellipse, - the "X Direction" defines the major axis, and - the "Y Direction" defines the minor axis. This coordinate system is the local coordinate system of the ellipse. The orientation (direct or indirect) of the local coordinate system gives an explicit orientation to the ellipse, determining the direction in which the parameter increases along the ellipse. The Geom2d_Ellipse ellipse is parameterized by an angle: P(U) = O + MajorRad*Cos(U)*XDir + MinorRad*Sin(U)*YDir where: - P is the point of parameter U, - O, XDir and YDir are respectively the origin, "X Direction" and "Y Direction" of its local coordinate system, - MajorRad and MinorRad are the major and minor radii of the ellipse. The "X Axis" of the local coordinate system therefore defines the origin of the parameter of the ellipse. An ellipse is a closed and periodic curve. The period is 2.*Pi and the parameter range is [ 0,2.*Pi [. See Also GCE2d_MakeEllipse which provides functions for more complex ellipse constructions gp_Ax22d gp_Elips2d for an equivalent, non-parameterized data structureDescribes an ellipse in the plane (2D space). An ellipse is defined by its major and minor radii and, as with any conic curve, is positioned in the plane with a coordinate system (gp_Ax22d object) where: - the origin is the center of the ellipse, - the "X Direction" defines the major axis, and - the "Y Direction" defines the minor axis. This coordinate system is the local coordinate system of the ellipse. The orientation (direct or indirect) of the local coordinate system gives an explicit orientation to the ellipse, determining the direction in which the parameter increases along the ellipse. The Geom2d_Ellipse ellipse is parameterized by an angle: P(U) = O + MajorRad*Cos(U)*XDir + MinorRad*Sin(U)*YDir where: - P is the point of parameter U, - O, XDir and YDir are respectively the origin, "X Direction" and "Y Direction" of its local coordinate system, - MajorRad and MinorRad are the major and minor radii of the ellipse. The "X Axis" of the local coordinate system therefore defines the origin of the parameter of the ellipse. An ellipse is a closed and periodic curve. The period is 2.*Pi and the parameter range is [ 0,2.*Pi [. See Also GCE2d_MakeEllipse which provides functions for more complex ellipse constructions gp_Ax22d gp_Elips2d for an equivalent, non-parameterized data structureDescribes an ellipse in the plane (2D space). An ellipse is defined by its major and minor radii and, as with any conic curve, is positioned in the plane with a coordinate system (gp_Ax22d object) where: - the origin is the center of the ellipse, - the "X Direction" defines the major axis, and - the "Y Direction" defines the minor axis. This coordinate system is the local coordinate system of the ellipse. The orientation (direct or indirect) of the local coordinate system gives an explicit orientation to the ellipse, determining the direction in which the parameter increases along the ellipse. The Geom2d_Ellipse ellipse is parameterized by an angle: P(U) = O + MajorRad*Cos(U)*XDir + MinorRad*Sin(U)*YDir where: - P is the point of parameter U, - O, XDir and YDir are respectively the origin, "X Direction" and "Y Direction" of its local coordinate system, - MajorRad and MinorRad are the major and minor radii of the ellipse. The "X Axis" of the local coordinate system therefore defines the origin of the parameter of the ellipse. An ellipse is a closed and periodic curve. The period is 2.*Pi and the parameter range is [ 0,2.*Pi [. See Also GCE2d_MakeEllipse which provides functions for more complex ellipse constructions gp_Ax22d gp_Elips2d for an equivalent, non-parameterized data structure """ def Continuity(self) -> OCP.GeomAbs.GeomAbs_Shape: """ Returns GeomAbs_CN which is the global continuity of any conic. """ def Copy(self) -> Geom2d_Geometry: """ Creates a new object which is a copy of this ellipse. """ def D0(self,U : float,P : OCP.gp.gp_Pnt2d) -> None: """ Returns in P the point of parameter U. P = C + MajorRadius * Cos (U) * XDir + MinorRadius * Sin (U) * YDir where C is the center of the ellipse , XDir the direction of the "XAxis" and "YDir" the "YAxis" of the ellipse. """ def D1(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d) -> None: """ None """ def D2(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d) -> None: """ Returns the point P of parameter U. The vectors V1 and V2 are the first and second derivatives at this point. """ def D3(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d,V3 : OCP.gp.gp_Vec2d) -> None: """ Returns the point P of parameter U, the first second and third derivatives V1 V2 and V3. """ def DN(self,U : float,N : int) -> OCP.gp.gp_Vec2d: """ For the point of parameter U of this ellipse, computes the vector corresponding to the Nth derivative. Exceptions Standard_RangeError if N is less than 1. """ def DecrementRefCounter(self) -> int: """ Decrements the reference counter of this object; returns the decremented value """ def Delete(self) -> None: """ Memory deallocator for transient classes """ def Directrix1(self) -> OCP.gp.gp_Ax2d: """ Computes the directrices of this ellipse. This directrix is the line normal to the XAxis of the ellipse in the local plane (Z = 0) at a distance d = MajorRadius / e from the center of the ellipse, where e is the eccentricity of the ellipse. This line is parallel to the "YAxis". The intersection point between directrix1 and the "XAxis" is the "Location" point of the directrix1. This point is on the positive side of the "XAxis". Raises ConstructionError if Eccentricity = 0.0. (The ellipse degenerates into a circle) """ def Directrix2(self) -> OCP.gp.gp_Ax2d: """ This line is obtained by the symmetrical transformation of "Directrix1" with respect to the "YAxis" of the ellipse. Raises ConstructionError if Eccentricity = 0.0. (The ellipse degenerates into a circle). """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def DynamicType(self) -> OCP.Standard.Standard_Type: """ None """ def Eccentricity(self) -> float: """ Returns the eccentricity of the ellipse between 0.0 and 1.0 If f is the distance between the center of the ellipse and the Focus1 then the eccentricity e = f / MajorRadius. Returns 0 if MajorRadius = 0 """ def Elips2d(self) -> OCP.gp.gp_Elips2d: """ Converts this ellipse into a gp_Elips2d ellipse. """ def FirstParameter(self) -> float: """ Returns the value of the first parameter of this ellipse. This is 0.0, which gives the start point of this ellipse. The start point and end point of an ellipse are coincident. """ def Focal(self) -> float: """ Computes the focal distance. The focal distance is the distance between the center and a focus of the ellipse. """ def Focus1(self) -> OCP.gp.gp_Pnt2d: """ Returns the first focus of the ellipse. This focus is on the positive side of the "XAxis" of the ellipse. """ def Focus2(self) -> OCP.gp.gp_Pnt2d: """ Returns the second focus of the ellipse. This focus is on the negative side of the "XAxis" of the ellipse. """ def GetRefCount(self) -> int: """ Get the reference counter of this object """ def IncrementRefCounter(self) -> None: """ Increments the reference counter of this object """ def IsCN(self,N : int) -> bool: """ Returns True, the order of continuity of a conic is infinite. """ def IsClosed(self) -> bool: """ return True. """ @overload def IsInstance(self,theType : OCP.Standard.Standard_Type) -> bool: """ Returns a true value if this is an instance of Type. Returns a true value if this is an instance of TypeName. """ @overload def IsInstance(self,theTypeName : str) -> bool: ... @overload def IsKind(self,theTypeName : str) -> bool: """ Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. """ @overload def IsKind(self,theType : OCP.Standard.Standard_Type) -> bool: ... def IsPeriodic(self) -> bool: """ return True. """ def LastParameter(self) -> float: """ Returns the value of the last parameter of this ellipse. This is 2.*Pi, which gives the end point of this ellipse. The start point and end point of an ellipse are coincident. """ def Location(self) -> OCP.gp.gp_Pnt2d: """ Returns the location point of the conic. For the circle, the ellipse and the hyperbola it is the center of the conic. For the parabola it is the vertex of the parabola. """ def MajorRadius(self) -> float: """ Returns the major radius of this ellipse. """ def MinorRadius(self) -> float: """ Returns the minor radius of this ellipse. """ @overload def Mirror(self,P : OCP.gp.gp_Pnt2d) -> None: """ Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirror(self,A : OCP.gp.gp_Ax2d) -> None: ... @overload def Mirrored(self,A : OCP.gp.gp_Ax2d) -> Geom2d_Geometry: """ None None """ @overload def Mirrored(self,P : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: ... def Parameter(self) -> float: """ Computes the parameter of this ellipse. This value is given by the formula p = (1 - e * e) * MajorRadius where e is the eccentricity of the ellipse. Returns 0 if MajorRadius = 0 """ def ParametricTransformation(self,T : OCP.gp.gp_Trsf2d) -> float: """ Returns the coefficient required to compute the parametric transformation of this curve when transformation T is applied. This coefficient is the ratio between the parameter of a point on this curve and the parameter of the transformed point on the new curve transformed by T. Note: this function generally returns 1. but it can be redefined (for example, on a line). """ def Period(self) -> float: """ Returns the period of this curve. raises if the curve is not periodic """ def Position(self) -> OCP.gp.gp_Ax22d: """ Returns the local coordinates system of the conic. """ def Reverse(self) -> None: """ Reverses the direction of parameterization of . The local coordinate system of the conic is modified. """ def Reversed(self) -> Geom2d_Curve: """ Creates a reversed duplicate Changes the orientation of this curve. The first and last parameters are not changed, but the parametric direction of the curve is reversed. If the curve is bounded: - the start point of the initial curve becomes the end point of the reversed curve, and - the end point of the initial curve becomes the start point of the reversed curve. - Reversed creates a new curve. """ def ReversedParameter(self,U : float) -> float: """ Computes the parameter on the reversed ellipse for the point of parameter U on this ellipse. For an ellipse, the returned value is: 2.*Pi - U. """ def Rotate(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> None: """ Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. """ def Rotated(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> Geom2d_Geometry: """ None """ def Scale(self,P : OCP.gp.gp_Pnt2d,S : float) -> None: """ Scales a Geometry. S is the scaling value. """ def Scaled(self,P : OCP.gp.gp_Pnt2d,S : float) -> Geom2d_Geometry: """ None """ def SetAxis(self,theA : OCP.gp.gp_Ax22d) -> None: """ Modifies this conic, redefining its local coordinate system partially, by assigning theA as its axis """ def SetElips2d(self,E : OCP.gp.gp_Elips2d) -> None: """ Converts the gp_Elips2d ellipse E into this ellipse. """ def SetLocation(self,theP : OCP.gp.gp_Pnt2d) -> None: """ Modifies this conic, redefining its local coordinate system partially, by assigning theP as its origin. """ def SetMajorRadius(self,MajorRadius : float) -> None: """ Assigns a value to the major radius of this ellipse. Exceptions Standard_ConstructionError if: - the major radius of this ellipse becomes less than the minor radius, or - MinorRadius is less than 0. """ def SetMinorRadius(self,MinorRadius : float) -> None: """ Assigns a value to the minor radius of this ellipse. Exceptions Standard_ConstructionError if: - the major radius of this ellipse becomes less than the minor radius, or - MinorRadius is less than 0. """ def SetXAxis(self,theAX : OCP.gp.gp_Ax2d) -> None: """ Assigns the origin and unit vector of axis theA to the origin of the local coordinate system of this conic and X Direction. The other unit vector of the local coordinate system of this conic is recomputed normal to theA, without changing the orientation of the local coordinate system (right-handed or left-handed). """ def SetYAxis(self,theAY : OCP.gp.gp_Ax2d) -> None: """ Assigns the origin and unit vector of axis theA to the origin of the local coordinate system of this conic and Y Direction. The other unit vector of the local coordinate system of this conic is recomputed normal to theA, without changing the orientation of the local coordinate system (right-handed or left-handed). """ def This(self) -> OCP.Standard.Standard_Transient: """ Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. """ def Transform(self,T : OCP.gp.gp_Trsf2d) -> None: """ Applies the transformation T to this ellipse. """ def Transformed(self,T : OCP.gp.gp_Trsf2d) -> Geom2d_Geometry: """ None """ def TransformedParameter(self,U : float,T : OCP.gp.gp_Trsf2d) -> float: """ Computes the parameter on the curve transformed by T for the point of parameter U on this curve. Note: this function generally returns U but it can be redefined (for example, on a line). """ @overload def Translate(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> None: """ Translates a Geometry. V is the vector of the translation. Translates a Geometry from the point P1 to the point P2. """ @overload def Translate(self,V : OCP.gp.gp_Vec2d) -> None: ... @overload def Translated(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: """ None None """ @overload def Translated(self,V : OCP.gp.gp_Vec2d) -> Geom2d_Geometry: ... def Value(self,U : float) -> OCP.gp.gp_Pnt2d: """ Computes the point of parameter U on . If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. """ def XAxis(self) -> OCP.gp.gp_Ax2d: """ Returns the "XAxis" of the conic. This axis defines the origin of parametrization of the conic. This axis and the "Yaxis" define the local coordinate system of the conic. -C++: return const& """ def YAxis(self) -> OCP.gp.gp_Ax2d: """ Returns the "YAxis" of the conic. The "YAxis" is perpendicular to the "Xaxis". """ @overload def __init__(self,MajorAxis : OCP.gp.gp_Ax2d,MajorRadius : float,MinorRadius : float,Sense : bool=True) -> None: ... @overload def __init__(self,E : OCP.gp.gp_Elips2d) -> None: ... @overload def __init__(self,Axis : OCP.gp.gp_Ax22d,MajorRadius : float,MinorRadius : float) -> None: ... @staticmethod def get_type_descriptor_s() -> OCP.Standard.Standard_Type: """ None """ @staticmethod def get_type_name_s() -> str: """ None """ pass class Geom2d_AxisPlacement(Geom2d_Geometry, OCP.Standard.Standard_Transient): """ Describes an axis in 2D space. An axis is defined by: - its origin, also termed the "Location point" of the axis, - its unit vector, termed the "Direction" of the axis. Note: Geom2d_AxisPlacement axes provide the same kind of "geometric" services as gp_Ax2d axes but have more complex data structures. The geometric objects provided by the Geom2d package use gp_Ax2d objects to include axes in their data structures, or to define an axis of symmetry or axis of rotation. Geom2d_AxisPlacement axes are used in a context where they can be shared by several objects contained inside a common data structure.Describes an axis in 2D space. An axis is defined by: - its origin, also termed the "Location point" of the axis, - its unit vector, termed the "Direction" of the axis. Note: Geom2d_AxisPlacement axes provide the same kind of "geometric" services as gp_Ax2d axes but have more complex data structures. The geometric objects provided by the Geom2d package use gp_Ax2d objects to include axes in their data structures, or to define an axis of symmetry or axis of rotation. Geom2d_AxisPlacement axes are used in a context where they can be shared by several objects contained inside a common data structure.Describes an axis in 2D space. An axis is defined by: - its origin, also termed the "Location point" of the axis, - its unit vector, termed the "Direction" of the axis. Note: Geom2d_AxisPlacement axes provide the same kind of "geometric" services as gp_Ax2d axes but have more complex data structures. The geometric objects provided by the Geom2d package use gp_Ax2d objects to include axes in their data structures, or to define an axis of symmetry or axis of rotation. Geom2d_AxisPlacement axes are used in a context where they can be shared by several objects contained inside a common data structure. """ def Angle(self,Other : Geom2d_AxisPlacement) -> float: """ Computes the angle between the "Direction" of two axis placement in radians. The result is comprised between -Pi and Pi. """ def Ax2d(self) -> OCP.gp.gp_Ax2d: """ Converts this axis into a gp_Ax2d axis. """ def Copy(self) -> Geom2d_Geometry: """ Creates a new object which is a copy of this axis. """ def DecrementRefCounter(self) -> int: """ Decrements the reference counter of this object; returns the decremented value """ def Delete(self) -> None: """ Memory deallocator for transient classes """ def Direction(self) -> OCP.gp.gp_Dir2d: """ Returns the "Direction" of . -C++: return const& """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def DynamicType(self) -> OCP.Standard.Standard_Type: """ None """ def GetRefCount(self) -> int: """ Get the reference counter of this object """ def IncrementRefCounter(self) -> None: """ Increments the reference counter of this object """ @overload def IsInstance(self,theType : OCP.Standard.Standard_Type) -> bool: """ Returns a true value if this is an instance of Type. Returns a true value if this is an instance of TypeName. """ @overload def IsInstance(self,theTypeName : str) -> bool: ... @overload def IsKind(self,theTypeName : str) -> bool: """ Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. """ @overload def IsKind(self,theType : OCP.Standard.Standard_Type) -> bool: ... def Location(self) -> OCP.gp.gp_Pnt2d: """ Returns the "Location" point (origin) of the axis placement. -C++: return const& """ @overload def Mirror(self,P : OCP.gp.gp_Pnt2d) -> None: """ Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirror(self,A : OCP.gp.gp_Ax2d) -> None: ... @overload def Mirrored(self,A : OCP.gp.gp_Ax2d) -> Geom2d_Geometry: """ None None """ @overload def Mirrored(self,P : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: ... def Reverse(self) -> None: """ None """ def Reversed(self) -> Geom2d_AxisPlacement: """ Reverses the unit vector of this axis. Note: - Reverse assigns the result to this axis, while - Reversed creates a new one. """ def Rotate(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> None: """ Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. """ def Rotated(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> Geom2d_Geometry: """ None """ def Scale(self,P : OCP.gp.gp_Pnt2d,S : float) -> None: """ Scales a Geometry. S is the scaling value. """ def Scaled(self,P : OCP.gp.gp_Pnt2d,S : float) -> Geom2d_Geometry: """ None """ def SetAxis(self,A : OCP.gp.gp_Ax2d) -> None: """ Changes the complete definition of the axis placement. """ def SetDirection(self,V : OCP.gp.gp_Dir2d) -> None: """ Changes the "Direction" of the axis placement. """ def SetLocation(self,P : OCP.gp.gp_Pnt2d) -> None: """ Changes the "Location" point (origin) of the axis placement. """ def This(self) -> OCP.Standard.Standard_Transient: """ Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. """ def Transform(self,T : OCP.gp.gp_Trsf2d) -> None: """ Applies the transformation T to this axis. """ def Transformed(self,T : OCP.gp.gp_Trsf2d) -> Geom2d_Geometry: """ None """ @overload def Translate(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> None: """ Translates a Geometry. V is the vector of the translation. Translates a Geometry from the point P1 to the point P2. """ @overload def Translate(self,V : OCP.gp.gp_Vec2d) -> None: ... @overload def Translated(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: """ None None """ @overload def Translated(self,V : OCP.gp.gp_Vec2d) -> Geom2d_Geometry: ... @overload def __init__(self,A : OCP.gp.gp_Ax2d) -> None: ... @overload def __init__(self,P : OCP.gp.gp_Pnt2d,V : OCP.gp.gp_Dir2d) -> None: ... @staticmethod def get_type_descriptor_s() -> OCP.Standard.Standard_Type: """ None """ @staticmethod def get_type_name_s() -> str: """ None """ pass class Geom2d_Hyperbola(Geom2d_Conic, Geom2d_Curve, Geom2d_Geometry, OCP.Standard.Standard_Transient): """ Describes a branch of a hyperbola in the plane (2D space). A hyperbola is defined by its major and minor radii and, as with any conic curve, is positioned in the plane with a coordinate system (gp_Ax22d object) where: - the origin is the center of the hyperbola, - the "X Direction" defines the major axis, and - the "Y Direction" defines the minor axis. This coordinate system is the local coordinate system of the hyperbola. The branch of the hyperbola described is the one located on the positive side of the major axis. The orientation (direct or indirect) of the local coordinate system gives an explicit orientation to the hyperbola, determining the direction in which the parameter increases along the hyperbola. The Geom2d_Hyperbola hyperbola is parameterized as follows: P(U) = O + MajRad*Cosh(U)*XDir + MinRad*Sinh(U)*YDir where: - P is the point of parameter U, - O, XDir and YDir are respectively the origin, "X Direction" and "Y Direction" of its local coordinate system, - MajRad and MinRad are the major and minor radii of the hyperbola. The "X Axis" of the local coordinate system therefore defines the origin of the parameter of the hyperbola. The parameter range is ] -infinite,+infinite [. The following diagram illustrates the respective positions, in the plane of the hyperbola, of the three branches of hyperbolas constructed using the functions OtherBranch, ConjugateBranch1 and ConjugateBranch2: ^YAxis | FirstConjugateBranch | Other | Main --------------------- C --------------------->XAxis Branch | Branch | SecondConjugateBranch | Warning The value of the major radius (on the major axis) can be less than the value of the minor radius (on the minor axis). See Also GCE2d_MakeHyperbola which provides functions for more complex hyperbola constructions gp_Ax22d gp_Hypr2d for an equivalent, non-parameterized data structureDescribes a branch of a hyperbola in the plane (2D space). A hyperbola is defined by its major and minor radii and, as with any conic curve, is positioned in the plane with a coordinate system (gp_Ax22d object) where: - the origin is the center of the hyperbola, - the "X Direction" defines the major axis, and - the "Y Direction" defines the minor axis. This coordinate system is the local coordinate system of the hyperbola. The branch of the hyperbola described is the one located on the positive side of the major axis. The orientation (direct or indirect) of the local coordinate system gives an explicit orientation to the hyperbola, determining the direction in which the parameter increases along the hyperbola. The Geom2d_Hyperbola hyperbola is parameterized as follows: P(U) = O + MajRad*Cosh(U)*XDir + MinRad*Sinh(U)*YDir where: - P is the point of parameter U, - O, XDir and YDir are respectively the origin, "X Direction" and "Y Direction" of its local coordinate system, - MajRad and MinRad are the major and minor radii of the hyperbola. The "X Axis" of the local coordinate system therefore defines the origin of the parameter of the hyperbola. The parameter range is ] -infinite,+infinite [. The following diagram illustrates the respective positions, in the plane of the hyperbola, of the three branches of hyperbolas constructed using the functions OtherBranch, ConjugateBranch1 and ConjugateBranch2: ^YAxis | FirstConjugateBranch | Other | Main --------------------- C --------------------->XAxis Branch | Branch | SecondConjugateBranch | Warning The value of the major radius (on the major axis) can be less than the value of the minor radius (on the minor axis). See Also GCE2d_MakeHyperbola which provides functions for more complex hyperbola constructions gp_Ax22d gp_Hypr2d for an equivalent, non-parameterized data structureDescribes a branch of a hyperbola in the plane (2D space). A hyperbola is defined by its major and minor radii and, as with any conic curve, is positioned in the plane with a coordinate system (gp_Ax22d object) where: - the origin is the center of the hyperbola, - the "X Direction" defines the major axis, and - the "Y Direction" defines the minor axis. This coordinate system is the local coordinate system of the hyperbola. The branch of the hyperbola described is the one located on the positive side of the major axis. The orientation (direct or indirect) of the local coordinate system gives an explicit orientation to the hyperbola, determining the direction in which the parameter increases along the hyperbola. The Geom2d_Hyperbola hyperbola is parameterized as follows: P(U) = O + MajRad*Cosh(U)*XDir + MinRad*Sinh(U)*YDir where: - P is the point of parameter U, - O, XDir and YDir are respectively the origin, "X Direction" and "Y Direction" of its local coordinate system, - MajRad and MinRad are the major and minor radii of the hyperbola. The "X Axis" of the local coordinate system therefore defines the origin of the parameter of the hyperbola. The parameter range is ] -infinite,+infinite [. The following diagram illustrates the respective positions, in the plane of the hyperbola, of the three branches of hyperbolas constructed using the functions OtherBranch, ConjugateBranch1 and ConjugateBranch2: ^YAxis | FirstConjugateBranch | Other | Main --------------------- C --------------------->XAxis Branch | Branch | SecondConjugateBranch | Warning The value of the major radius (on the major axis) can be less than the value of the minor radius (on the minor axis). See Also GCE2d_MakeHyperbola which provides functions for more complex hyperbola constructions gp_Ax22d gp_Hypr2d for an equivalent, non-parameterized data structure """ def Asymptote1(self) -> OCP.gp.gp_Ax2d: """ In the local coordinate system of the hyperbola the equation of the hyperbola is (X*X)/(A*A) - (Y*Y)/(B*B) = 1.0 and the equation of the first asymptote is Y = (B/A)*X where A is the major radius of the hyperbola and B is the minor radius of the hyperbola. Raised if MajorRadius = 0.0 """ def Asymptote2(self) -> OCP.gp.gp_Ax2d: """ In the local coordinate system of the hyperbola the equation of the hyperbola is (X*X)/(A*A) - (Y*Y)/(B*B) = 1.0 and the equation of the first asymptote is Y = -(B/A)*X. where A is the major radius of the hyperbola and B is the minor radius of the hyperbola. raised if MajorRadius = 0.0 """ def ConjugateBranch1(self) -> OCP.gp.gp_Hypr2d: """ Computes the first conjugate branch relative to this hyperbola. Note: The diagram given under the class purpose indicates where these two branches of hyperbola are positioned in relation to this branch of hyperbola. """ def ConjugateBranch2(self) -> OCP.gp.gp_Hypr2d: """ Computes the second conjugate branch relative to this hyperbola. Note: The diagram given under the class purpose indicates where these two branches of hyperbola are positioned in relation to this branch of hyperbola. """ def Continuity(self) -> OCP.GeomAbs.GeomAbs_Shape: """ Returns GeomAbs_CN which is the global continuity of any conic. """ def Copy(self) -> Geom2d_Geometry: """ Creates a new object which is a copy of this hyperbola. """ def D0(self,U : float,P : OCP.gp.gp_Pnt2d) -> None: """ Returns in P the point of parameter U. P = C + MajorRadius * Cosh (U) * XDir + MinorRadius * Sinh (U) * YDir where C is the center of the hyperbola , XDir the XDirection and YDir the YDirection of the hyperbola's local coordinate system. """ def D1(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d) -> None: """ Returns the point P of parameter U and the first derivative V1. """ def D2(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d) -> None: """ Returns the point P of parameter U, the first and second derivatives V1 and V2. """ def D3(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d,V3 : OCP.gp.gp_Vec2d) -> None: """ Returns the point P of parameter U, the first second and third derivatives V1 V2 and V3. """ def DN(self,U : float,N : int) -> OCP.gp.gp_Vec2d: """ For the point of parameter U of this hyperbola, computes the vector corresponding to the Nth derivative. Exceptions Standard_RangeError if N is less than 1. """ def DecrementRefCounter(self) -> int: """ Decrements the reference counter of this object; returns the decremented value """ def Delete(self) -> None: """ Memory deallocator for transient classes """ def Directrix1(self) -> OCP.gp.gp_Ax2d: """ This directrix is the line normal to the XAxis of the hyperbola in the local plane (Z = 0) at a distance d = MajorRadius / e from the center of the hyperbola, where e is the eccentricity of the hyperbola. This line is parallel to the "YAxis". The intersection point between directrix1 and the "XAxis" is the location point of the directrix1. This point is on the positive side of the "XAxis". """ def Directrix2(self) -> OCP.gp.gp_Ax2d: """ This line is obtained by the symmetrical transformation of "Directrix1" with respect to the "YAxis" of the hyperbola. """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def DynamicType(self) -> OCP.Standard.Standard_Type: """ None """ def Eccentricity(self) -> float: """ Returns the eccentricity of the hyperbola (e > 1). If f is the distance between the location of the hyperbola and the Focus1 then the eccentricity e = f / MajorRadius. raised if MajorRadius = 0.0 """ def FirstParameter(self) -> float: """ Returns RealFirst from Standard. """ def Focal(self) -> float: """ Computes the focal distance. It is the distance between the two focus of the hyperbola. """ def Focus1(self) -> OCP.gp.gp_Pnt2d: """ Returns the first focus of the hyperbola. This focus is on the positive side of the "XAxis" of the hyperbola. """ def Focus2(self) -> OCP.gp.gp_Pnt2d: """ Returns the second focus of the hyperbola. This focus is on the negative side of the "XAxis" of the hyperbola. """ def GetRefCount(self) -> int: """ Get the reference counter of this object """ def Hypr2d(self) -> OCP.gp.gp_Hypr2d: """ Converts this hyperbola into a gp_Hypr2d one. """ def IncrementRefCounter(self) -> None: """ Increments the reference counter of this object """ def IsCN(self,N : int) -> bool: """ Returns True, the order of continuity of a conic is infinite. """ def IsClosed(self) -> bool: """ Returns False. """ @overload def IsInstance(self,theType : OCP.Standard.Standard_Type) -> bool: """ Returns a true value if this is an instance of Type. Returns a true value if this is an instance of TypeName. """ @overload def IsInstance(self,theTypeName : str) -> bool: ... @overload def IsKind(self,theTypeName : str) -> bool: """ Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. """ @overload def IsKind(self,theType : OCP.Standard.Standard_Type) -> bool: ... def IsPeriodic(self) -> bool: """ return False for an hyperbola. """ def LastParameter(self) -> float: """ returns RealLast from Standard. """ def Location(self) -> OCP.gp.gp_Pnt2d: """ Returns the location point of the conic. For the circle, the ellipse and the hyperbola it is the center of the conic. For the parabola it is the vertex of the parabola. """ def MajorRadius(self) -> float: """ Returns the major or minor radius of this hyperbola. The major radius is also the distance between the center of the hyperbola and the apex of the main branch (located on the "X Axis" of the hyperbola). """ def MinorRadius(self) -> float: """ Returns the major or minor radius of this hyperbola. The minor radius is also the distance between the center of the hyperbola and the apex of a conjugate branch (located on the "Y Axis" of the hyperbola). """ @overload def Mirror(self,P : OCP.gp.gp_Pnt2d) -> None: """ Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirror(self,A : OCP.gp.gp_Ax2d) -> None: ... @overload def Mirrored(self,A : OCP.gp.gp_Ax2d) -> Geom2d_Geometry: """ None None """ @overload def Mirrored(self,P : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: ... def OtherBranch(self) -> OCP.gp.gp_Hypr2d: """ Computes the "other" branch of this hyperbola. This is a symmetrical branch with respect to the center of this hyperbola. Note: The diagram given under the class purpose indicates where the "other" branch is positioned in relation to this branch of the hyperbola. ^ YAxis | FirstConjugateBranch | Other | Main ---------------------------- C ------------------------------------------>XAxis Branch | Branch | | SecondConjugateBranch | Warning The major radius can be less than the minor radius. """ def Parameter(self) -> float: """ Computes the parameter of this hyperbola. The parameter is: p = (e*e - 1) * MajorRadius where e is the eccentricity of this hyperbola and MajorRadius its major radius. Exceptions Standard_DomainError if the major radius of this hyperbola is null. """ def ParametricTransformation(self,T : OCP.gp.gp_Trsf2d) -> float: """ Returns the coefficient required to compute the parametric transformation of this curve when transformation T is applied. This coefficient is the ratio between the parameter of a point on this curve and the parameter of the transformed point on the new curve transformed by T. Note: this function generally returns 1. but it can be redefined (for example, on a line). """ def Period(self) -> float: """ Returns the period of this curve. raises if the curve is not periodic """ def Position(self) -> OCP.gp.gp_Ax22d: """ Returns the local coordinates system of the conic. """ def Reverse(self) -> None: """ Reverses the direction of parameterization of . The local coordinate system of the conic is modified. """ def Reversed(self) -> Geom2d_Curve: """ Creates a reversed duplicate Changes the orientation of this curve. The first and last parameters are not changed, but the parametric direction of the curve is reversed. If the curve is bounded: - the start point of the initial curve becomes the end point of the reversed curve, and - the end point of the initial curve becomes the start point of the reversed curve. - Reversed creates a new curve. """ def ReversedParameter(self,U : float) -> float: """ Computes the parameter on the reversed hyperbola, for the point of parameter U on this hyperbola. For a hyperbola, the returned value is -U. """ def Rotate(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> None: """ Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. """ def Rotated(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> Geom2d_Geometry: """ None """ def Scale(self,P : OCP.gp.gp_Pnt2d,S : float) -> None: """ Scales a Geometry. S is the scaling value. """ def Scaled(self,P : OCP.gp.gp_Pnt2d,S : float) -> Geom2d_Geometry: """ None """ def SetAxis(self,theA : OCP.gp.gp_Ax22d) -> None: """ Modifies this conic, redefining its local coordinate system partially, by assigning theA as its axis """ def SetHypr2d(self,H : OCP.gp.gp_Hypr2d) -> None: """ Converts the gp_Hypr2d hyperbola H into this hyperbola. """ def SetLocation(self,theP : OCP.gp.gp_Pnt2d) -> None: """ Modifies this conic, redefining its local coordinate system partially, by assigning theP as its origin. """ def SetMajorRadius(self,MajorRadius : float) -> None: """ Assigns a value to the major or minor radius of this hyperbola. Exceptions Standard_ConstructionError if: - MajorRadius is less than 0.0, - MinorRadius is less than 0.0. """ def SetMinorRadius(self,MinorRadius : float) -> None: """ Assigns a value to the major or minor radius of this hyperbola. Exceptions Standard_ConstructionError if: - MajorRadius is less than 0.0, - MinorRadius is less than 0.0. """ def SetXAxis(self,theAX : OCP.gp.gp_Ax2d) -> None: """ Assigns the origin and unit vector of axis theA to the origin of the local coordinate system of this conic and X Direction. The other unit vector of the local coordinate system of this conic is recomputed normal to theA, without changing the orientation of the local coordinate system (right-handed or left-handed). """ def SetYAxis(self,theAY : OCP.gp.gp_Ax2d) -> None: """ Assigns the origin and unit vector of axis theA to the origin of the local coordinate system of this conic and Y Direction. The other unit vector of the local coordinate system of this conic is recomputed normal to theA, without changing the orientation of the local coordinate system (right-handed or left-handed). """ def This(self) -> OCP.Standard.Standard_Transient: """ Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. """ def Transform(self,T : OCP.gp.gp_Trsf2d) -> None: """ Applies the transformation T to this hyperbola. """ def Transformed(self,T : OCP.gp.gp_Trsf2d) -> Geom2d_Geometry: """ None """ def TransformedParameter(self,U : float,T : OCP.gp.gp_Trsf2d) -> float: """ Computes the parameter on the curve transformed by T for the point of parameter U on this curve. Note: this function generally returns U but it can be redefined (for example, on a line). """ @overload def Translate(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> None: """ Translates a Geometry. V is the vector of the translation. Translates a Geometry from the point P1 to the point P2. """ @overload def Translate(self,V : OCP.gp.gp_Vec2d) -> None: ... @overload def Translated(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: """ None None """ @overload def Translated(self,V : OCP.gp.gp_Vec2d) -> Geom2d_Geometry: ... def Value(self,U : float) -> OCP.gp.gp_Pnt2d: """ Computes the point of parameter U on . If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. """ def XAxis(self) -> OCP.gp.gp_Ax2d: """ Returns the "XAxis" of the conic. This axis defines the origin of parametrization of the conic. This axis and the "Yaxis" define the local coordinate system of the conic. -C++: return const& """ def YAxis(self) -> OCP.gp.gp_Ax2d: """ Returns the "YAxis" of the conic. The "YAxis" is perpendicular to the "Xaxis". """ @overload def __init__(self,H : OCP.gp.gp_Hypr2d) -> None: ... @overload def __init__(self,MajorAxis : OCP.gp.gp_Ax2d,MajorRadius : float,MinorRadius : float,Sense : bool=True) -> None: ... @overload def __init__(self,Axis : OCP.gp.gp_Ax22d,MajorRadius : float,MinorRadius : float) -> None: ... @staticmethod def get_type_descriptor_s() -> OCP.Standard.Standard_Type: """ None """ @staticmethod def get_type_name_s() -> str: """ None """ pass class Geom2d_Line(Geom2d_Curve, Geom2d_Geometry, OCP.Standard.Standard_Transient): """ Describes an infinite line in the plane (2D space). A line is defined and positioned in the plane with an axis (gp_Ax2d object) which gives it an origin and a unit vector. The Geom2d_Line line is parameterized as follows: P (U) = O + U*Dir where: - P is the point of parameter U, - O is the origin and Dir the unit vector of its positioning axis. The parameter range is ] -infinite, +infinite [. The orientation of the line is given by the unit vector of its positioning axis. See Also GCE2d_MakeLine which provides functions for more complex line constructions gp_Ax2d gp_Lin2d for an equivalent, non-parameterized data structure.Describes an infinite line in the plane (2D space). A line is defined and positioned in the plane with an axis (gp_Ax2d object) which gives it an origin and a unit vector. The Geom2d_Line line is parameterized as follows: P (U) = O + U*Dir where: - P is the point of parameter U, - O is the origin and Dir the unit vector of its positioning axis. The parameter range is ] -infinite, +infinite [. The orientation of the line is given by the unit vector of its positioning axis. See Also GCE2d_MakeLine which provides functions for more complex line constructions gp_Ax2d gp_Lin2d for an equivalent, non-parameterized data structure.Describes an infinite line in the plane (2D space). A line is defined and positioned in the plane with an axis (gp_Ax2d object) which gives it an origin and a unit vector. The Geom2d_Line line is parameterized as follows: P (U) = O + U*Dir where: - P is the point of parameter U, - O is the origin and Dir the unit vector of its positioning axis. The parameter range is ] -infinite, +infinite [. The orientation of the line is given by the unit vector of its positioning axis. See Also GCE2d_MakeLine which provides functions for more complex line constructions gp_Ax2d gp_Lin2d for an equivalent, non-parameterized data structure. """ def Continuity(self) -> OCP.GeomAbs.GeomAbs_Shape: """ Returns GeomAbs_CN, which is the global continuity of any line. """ def Copy(self) -> Geom2d_Geometry: """ Creates a new object, which is a copy of this line. """ def D0(self,U : float,P : OCP.gp.gp_Pnt2d) -> None: """ Returns in P the point of parameter U. P (U) = O + U * Dir where O is the "Location" point of the line and Dir the direction of the line. """ def D1(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d) -> None: """ Returns the point P of parameter u and the first derivative V1. """ def D2(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d) -> None: """ Returns the point P of parameter U, the first and second derivatives V1 and V2. V2 is a vector with null magnitude for a line. """ def D3(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d,V3 : OCP.gp.gp_Vec2d) -> None: """ V2 and V3 are vectors with null magnitude for a line. """ def DN(self,U : float,N : int) -> OCP.gp.gp_Vec2d: """ For the point of parameter U of this line, computes the vector corresponding to the Nth derivative. Note: if N is greater than or equal to 2, the result is a vector with null magnitude. Exceptions Standard_RangeError if N is less than 1. """ def DecrementRefCounter(self) -> int: """ Decrements the reference counter of this object; returns the decremented value """ def Delete(self) -> None: """ Memory deallocator for transient classes """ def Direction(self) -> OCP.gp.gp_Dir2d: """ changes the direction of the line. """ def Distance(self,P : OCP.gp.gp_Pnt2d) -> float: """ Computes the distance between and the point P. """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def DynamicType(self) -> OCP.Standard.Standard_Type: """ None """ def FirstParameter(self) -> float: """ Returns RealFirst from Standard. """ def GetRefCount(self) -> int: """ Get the reference counter of this object """ def IncrementRefCounter(self) -> None: """ Increments the reference counter of this object """ def IsCN(self,N : int) -> bool: """ Returns True. """ def IsClosed(self) -> bool: """ Returns False """ @overload def IsInstance(self,theType : OCP.Standard.Standard_Type) -> bool: """ Returns a true value if this is an instance of Type. Returns a true value if this is an instance of TypeName. """ @overload def IsInstance(self,theTypeName : str) -> bool: ... @overload def IsKind(self,theTypeName : str) -> bool: """ Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. """ @overload def IsKind(self,theType : OCP.Standard.Standard_Type) -> bool: ... def IsPeriodic(self) -> bool: """ Returns False """ def LastParameter(self) -> float: """ Returns RealLast from Standard """ def Lin2d(self) -> OCP.gp.gp_Lin2d: """ Returns non persistent line from gp with the same geometric properties as """ def Location(self) -> OCP.gp.gp_Pnt2d: """ Changes the "Location" point (origin) of the line. """ @overload def Mirror(self,P : OCP.gp.gp_Pnt2d) -> None: """ Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirror(self,A : OCP.gp.gp_Ax2d) -> None: ... @overload def Mirrored(self,A : OCP.gp.gp_Ax2d) -> Geom2d_Geometry: """ None None """ @overload def Mirrored(self,P : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: ... def ParametricTransformation(self,T : OCP.gp.gp_Trsf2d) -> float: """ Returns the coefficient required to compute the parametric transformation of this line when transformation T is applied. This coefficient is the ratio between the parameter of a point on this line and the parameter of the transformed point on the new line transformed by T. For a line, the returned value is the scale factor of the transformation T. """ def Period(self) -> float: """ Returns the period of this curve. raises if the curve is not periodic """ def Position(self) -> OCP.gp.gp_Ax2d: """ None """ def Reverse(self) -> None: """ Changes the orientation of this line. As a result, the unit vector of the positioning axis of this line is reversed. """ def Reversed(self) -> Geom2d_Curve: """ Creates a reversed duplicate Changes the orientation of this curve. The first and last parameters are not changed, but the parametric direction of the curve is reversed. If the curve is bounded: - the start point of the initial curve becomes the end point of the reversed curve, and - the end point of the initial curve becomes the start point of the reversed curve. - Reversed creates a new curve. """ def ReversedParameter(self,U : float) -> float: """ Computes the parameter on the reversed line for the point of parameter U on this line. For a line, the returned value is -U. """ def Rotate(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> None: """ Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. """ def Rotated(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> Geom2d_Geometry: """ None """ def Scale(self,P : OCP.gp.gp_Pnt2d,S : float) -> None: """ Scales a Geometry. S is the scaling value. """ def Scaled(self,P : OCP.gp.gp_Pnt2d,S : float) -> Geom2d_Geometry: """ None """ def SetDirection(self,V : OCP.gp.gp_Dir2d) -> None: """ changes the direction of the line. """ def SetLin2d(self,L : OCP.gp.gp_Lin2d) -> None: """ Set so that has the same geometric properties as L. """ def SetLocation(self,P : OCP.gp.gp_Pnt2d) -> None: """ Changes the "Location" point (origin) of the line. """ def SetPosition(self,A : OCP.gp.gp_Ax2d) -> None: """ Changes the "Location" and a the "Direction" of . """ def This(self) -> OCP.Standard.Standard_Transient: """ Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. """ def Transform(self,T : OCP.gp.gp_Trsf2d) -> None: """ Applies the transformation T to this line. """ def Transformed(self,T : OCP.gp.gp_Trsf2d) -> Geom2d_Geometry: """ None """ def TransformedParameter(self,U : float,T : OCP.gp.gp_Trsf2d) -> float: """ Computes the parameter on the line transformed by T for the point of parameter U on this line. For a line, the returned value is equal to U multiplied by the scale factor of transformation T. """ @overload def Translate(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> None: """ Translates a Geometry. V is the vector of the translation. Translates a Geometry from the point P1 to the point P2. """ @overload def Translate(self,V : OCP.gp.gp_Vec2d) -> None: ... @overload def Translated(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: """ None None """ @overload def Translated(self,V : OCP.gp.gp_Vec2d) -> Geom2d_Geometry: ... def Value(self,U : float) -> OCP.gp.gp_Pnt2d: """ Computes the point of parameter U on . If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. """ @overload def __init__(self,A : OCP.gp.gp_Ax2d) -> None: ... @overload def __init__(self,L : OCP.gp.gp_Lin2d) -> None: ... @overload def __init__(self,P : OCP.gp.gp_Pnt2d,V : OCP.gp.gp_Dir2d) -> None: ... @staticmethod def get_type_descriptor_s() -> OCP.Standard.Standard_Type: """ None """ @staticmethod def get_type_name_s() -> str: """ None """ pass class Geom2d_OffsetCurve(Geom2d_Curve, Geom2d_Geometry, OCP.Standard.Standard_Transient): """ This class implements the basis services for the creation, edition, modification and evaluation of planar offset curve. The offset curve is obtained by offsetting by distance along the normal to a basis curve defined in 2D space. The offset curve in this package can be a self intersecting curve even if the basis curve does not self-intersect. The self intersecting portions are not deleted at the construction time. An offset curve is a curve at constant distance (Offset) from a basis curve and the offset curve takes its parametrization from the basis curve. The Offset curve is in the direction of the normal to the basis curve N. The distance offset may be positive or negative to indicate the preferred side of the curve : . distance offset >0 => the curve is in the direction of N . distance offset >0 => the curve is in the direction of - N On the Offset curve : Value(u) = BasisCurve.Value(U) + (Offset * (T ^ Z)) / ||T ^ Z|| where T is the tangent vector to the basis curve and Z the direction of the normal vector to the plane of the curve, N = T ^ Z defines the offset direction and should not have null length.This class implements the basis services for the creation, edition, modification and evaluation of planar offset curve. The offset curve is obtained by offsetting by distance along the normal to a basis curve defined in 2D space. The offset curve in this package can be a self intersecting curve even if the basis curve does not self-intersect. The self intersecting portions are not deleted at the construction time. An offset curve is a curve at constant distance (Offset) from a basis curve and the offset curve takes its parametrization from the basis curve. The Offset curve is in the direction of the normal to the basis curve N. The distance offset may be positive or negative to indicate the preferred side of the curve : . distance offset >0 => the curve is in the direction of N . distance offset >0 => the curve is in the direction of - N On the Offset curve : Value(u) = BasisCurve.Value(U) + (Offset * (T ^ Z)) / ||T ^ Z|| where T is the tangent vector to the basis curve and Z the direction of the normal vector to the plane of the curve, N = T ^ Z defines the offset direction and should not have null length.This class implements the basis services for the creation, edition, modification and evaluation of planar offset curve. The offset curve is obtained by offsetting by distance along the normal to a basis curve defined in 2D space. The offset curve in this package can be a self intersecting curve even if the basis curve does not self-intersect. The self intersecting portions are not deleted at the construction time. An offset curve is a curve at constant distance (Offset) from a basis curve and the offset curve takes its parametrization from the basis curve. The Offset curve is in the direction of the normal to the basis curve N. The distance offset may be positive or negative to indicate the preferred side of the curve : . distance offset >0 => the curve is in the direction of N . distance offset >0 => the curve is in the direction of - N On the Offset curve : Value(u) = BasisCurve.Value(U) + (Offset * (T ^ Z)) / ||T ^ Z|| where T is the tangent vector to the basis curve and Z the direction of the normal vector to the plane of the curve, N = T ^ Z defines the offset direction and should not have null length. """ def BasisCurve(self) -> Geom2d_Curve: """ Returns the basis curve of this offset curve. The basis curve can be an offset curve. """ def Continuity(self) -> OCP.GeomAbs.GeomAbs_Shape: """ Continuity of the Offset curve : C0 : only geometric continuity, C1 : continuity of the first derivative all along the Curve, C2 : continuity of the second derivative all along the Curve, C3 : continuity of the third derivative all along the Curve, G1 : tangency continuity all along the Curve, G2 : curvature continuity all along the Curve, CN : the order of continuity is infinite. Warnings : Returns the continuity of the basis curve - 1. The offset curve must have a unique normal direction defined at any point. Value and derivatives """ def Copy(self) -> Geom2d_Geometry: """ Creates a new object, which is a copy of this offset curve. """ def D0(self,U : float,P : OCP.gp.gp_Pnt2d) -> None: """ Warning! this should not be called if the basis curve is not at least C1. Nevertheless if used on portion where the curve is C1, it is OK """ def D1(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d) -> None: """ Warning! this should not be called if the continuity of the basis curve is not C2. Nevertheless, it's OK to use it on portion where the curve is C2 """ def D2(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d) -> None: """ Warning! This should not be called if the continuity of the basis curve is not C3. Nevertheless, it's OK to use it on portion where the curve is C3 """ def D3(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d,V3 : OCP.gp.gp_Vec2d) -> None: """ Warning! This should not be called if the continuity of the basis curve is not C4. Nevertheless, it's OK to use it on portion where the curve is C4 """ def DN(self,U : float,N : int) -> OCP.gp.gp_Vec2d: """ The returned vector gives the value of the derivative for the order of derivation N. Warning! this should not be called raises UndefunedDerivative if the continuity of the basis curve is not CN+1. Nevertheless, it's OK to use it on portion where the curve is CN+1 raises RangeError if N < 1. raises NotImplemented if N > 3. The following functions compute the value and derivatives on the offset curve and returns the derivatives on the basis curve too. The computation of the value and derivatives on the basis curve are used to evaluate the offset curve Warnings : The exception UndefinedValue or UndefinedDerivative is raised if it is not possible to compute a unique offset direction. """ def DecrementRefCounter(self) -> int: """ Decrements the reference counter of this object; returns the decremented value """ def Delete(self) -> None: """ Memory deallocator for transient classes """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def DynamicType(self) -> OCP.Standard.Standard_Type: """ None """ def FirstParameter(self) -> float: """ Returns the value of the first parameter of this offset curve. The first parameter corresponds to the start point of the curve. Note: the first and last parameters of this offset curve are also the ones of its basis curve. """ def GetBasisCurveContinuity(self) -> OCP.GeomAbs.GeomAbs_Shape: """ Returns continuity of the basis curve. """ def GetRefCount(self) -> int: """ Get the reference counter of this object """ def IncrementRefCounter(self) -> None: """ Increments the reference counter of this object """ def IsCN(self,N : int) -> bool: """ Is the order of continuity of the curve N ? Warnings : This method answer True if the continuity of the basis curve is N + 1. We suppose in this class that a normal direction to the basis curve (used to compute the offset curve) is defined at any point on the basis curve. Raised if N < 0. """ def IsClosed(self) -> bool: """ Returns True if the distance between the start point and the end point of the curve is lower or equal to Resolution from package gp. """ @overload def IsInstance(self,theType : OCP.Standard.Standard_Type) -> bool: """ Returns a true value if this is an instance of Type. Returns a true value if this is an instance of TypeName. """ @overload def IsInstance(self,theTypeName : str) -> bool: ... @overload def IsKind(self,theTypeName : str) -> bool: """ Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. """ @overload def IsKind(self,theType : OCP.Standard.Standard_Type) -> bool: ... def IsPeriodic(self) -> bool: """ Is the parametrization of a curve is periodic ? If the basis curve is a circle or an ellipse the corresponding OffsetCurve is periodic. If the basis curve can't be periodic (for example BezierCurve) the OffsetCurve can't be periodic. """ def LastParameter(self) -> float: """ Returns the value of the last parameter of this offset curve. The last parameter corresponds to the end point. Note: the first and last parameters of this offset curve are also the ones of its basis curve. """ @overload def Mirror(self,P : OCP.gp.gp_Pnt2d) -> None: """ Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirror(self,A : OCP.gp.gp_Ax2d) -> None: ... @overload def Mirrored(self,A : OCP.gp.gp_Ax2d) -> Geom2d_Geometry: """ None None """ @overload def Mirrored(self,P : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: ... def Offset(self) -> float: """ Returns the offset value of this offset curve. """ def ParametricTransformation(self,T : OCP.gp.gp_Trsf2d) -> float: """ Returns a coefficient to compute the parameter on the transformed curve for the transform of the point on . """ def Period(self) -> float: """ Returns the period of this offset curve, i.e. the period of the basis curve of this offset curve. Exceptions Standard_NoSuchObject if the basis curve is not periodic. """ def Reverse(self) -> None: """ Changes the direction of parametrization of . As a result: - the basis curve is reversed, - the start point of the initial curve becomes the end point of the reversed curve, - the end point of the initial curve becomes the start point of the reversed curve, and - the first and last parameters are recomputed. """ def Reversed(self) -> Geom2d_Curve: """ Creates a reversed duplicate Changes the orientation of this curve. The first and last parameters are not changed, but the parametric direction of the curve is reversed. If the curve is bounded: - the start point of the initial curve becomes the end point of the reversed curve, and - the end point of the initial curve becomes the start point of the reversed curve. - Reversed creates a new curve. """ def ReversedParameter(self,U : float) -> float: """ Computes the parameter on the reversed curve for the point of parameter U on this offset curve. """ def Rotate(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> None: """ Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. """ def Rotated(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> Geom2d_Geometry: """ None """ def Scale(self,P : OCP.gp.gp_Pnt2d,S : float) -> None: """ Scales a Geometry. S is the scaling value. """ def Scaled(self,P : OCP.gp.gp_Pnt2d,S : float) -> Geom2d_Geometry: """ None """ def SetBasisCurve(self,C : Geom2d_Curve,isNotCheckC0 : bool=False) -> None: """ Changes this offset curve by assigning C as the basis curve from which it is built. If isNotCheckC0 = TRUE checking if basis curve has C0-continuity is not made. Exceptions if isNotCheckC0 = false, Standard_ConstructionError if the curve C is not at least "C1" continuous. """ def SetOffsetValue(self,D : float) -> None: """ Changes this offset curve by assigning D as the offset value. """ def This(self) -> OCP.Standard.Standard_Transient: """ Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. """ def Transform(self,T : OCP.gp.gp_Trsf2d) -> None: """ Applies the transformation T to this offset curve. Note: the basis curve is also modified. """ def Transformed(self,T : OCP.gp.gp_Trsf2d) -> Geom2d_Geometry: """ None """ def TransformedParameter(self,U : float,T : OCP.gp.gp_Trsf2d) -> float: """ Returns the parameter on the transformed curve for the transform of the point of parameter U on . """ @overload def Translate(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> None: """ Translates a Geometry. V is the vector of the translation. Translates a Geometry from the point P1 to the point P2. """ @overload def Translate(self,V : OCP.gp.gp_Vec2d) -> None: ... @overload def Translated(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: """ None None """ @overload def Translated(self,V : OCP.gp.gp_Vec2d) -> Geom2d_Geometry: ... def Value(self,U : float) -> OCP.gp.gp_Pnt2d: """ Computes the point of parameter U on . If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. """ def __init__(self,C : Geom2d_Curve,Offset : float,isNotCheckC0 : bool=False) -> None: ... @staticmethod def get_type_descriptor_s() -> OCP.Standard.Standard_Type: """ None """ @staticmethod def get_type_name_s() -> str: """ None """ pass class Geom2d_Parabola(Geom2d_Conic, Geom2d_Curve, Geom2d_Geometry, OCP.Standard.Standard_Transient): """ Describes a parabola in the plane (2D space). A parabola is defined by its focal length (i.e. the distance between its focus and its apex) and is positioned in the plane with a coordinate system (gp_Ax22d object) where: - the origin is the apex of the parabola, and - the "X Axis" defines the axis of symmetry; the parabola is on the positive side of this axis. This coordinate system is the local coordinate system of the parabola. The orientation (direct or indirect) of the local coordinate system gives an explicit orientation to the parabola, determining the direction in which the parameter increases along the parabola. The Geom_Parabola parabola is parameterized as follows: P(U) = O + U*U/(4.*F)*XDir + U*YDir, where: - P is the point of parameter U, - O, XDir and YDir are respectively the origin, "X Direction" and "Y Direction" of its local coordinate system, - F is the focal length of the parabola. The parameter of the parabola is therefore its Y coordinate in the local coordinate system, with the "X Axis" of the local coordinate system defining the origin of the parameter. The parameter range is ] -infinite,+infinite [.Describes a parabola in the plane (2D space). A parabola is defined by its focal length (i.e. the distance between its focus and its apex) and is positioned in the plane with a coordinate system (gp_Ax22d object) where: - the origin is the apex of the parabola, and - the "X Axis" defines the axis of symmetry; the parabola is on the positive side of this axis. This coordinate system is the local coordinate system of the parabola. The orientation (direct or indirect) of the local coordinate system gives an explicit orientation to the parabola, determining the direction in which the parameter increases along the parabola. The Geom_Parabola parabola is parameterized as follows: P(U) = O + U*U/(4.*F)*XDir + U*YDir, where: - P is the point of parameter U, - O, XDir and YDir are respectively the origin, "X Direction" and "Y Direction" of its local coordinate system, - F is the focal length of the parabola. The parameter of the parabola is therefore its Y coordinate in the local coordinate system, with the "X Axis" of the local coordinate system defining the origin of the parameter. The parameter range is ] -infinite,+infinite [.Describes a parabola in the plane (2D space). A parabola is defined by its focal length (i.e. the distance between its focus and its apex) and is positioned in the plane with a coordinate system (gp_Ax22d object) where: - the origin is the apex of the parabola, and - the "X Axis" defines the axis of symmetry; the parabola is on the positive side of this axis. This coordinate system is the local coordinate system of the parabola. The orientation (direct or indirect) of the local coordinate system gives an explicit orientation to the parabola, determining the direction in which the parameter increases along the parabola. The Geom_Parabola parabola is parameterized as follows: P(U) = O + U*U/(4.*F)*XDir + U*YDir, where: - P is the point of parameter U, - O, XDir and YDir are respectively the origin, "X Direction" and "Y Direction" of its local coordinate system, - F is the focal length of the parabola. The parameter of the parabola is therefore its Y coordinate in the local coordinate system, with the "X Axis" of the local coordinate system defining the origin of the parameter. The parameter range is ] -infinite,+infinite [. """ def Continuity(self) -> OCP.GeomAbs.GeomAbs_Shape: """ Returns GeomAbs_CN which is the global continuity of any conic. """ def Copy(self) -> Geom2d_Geometry: """ Creates a new object, which is a copy of this parabola. """ def D0(self,U : float,P : OCP.gp.gp_Pnt2d) -> None: """ Returns in P the point of parameter U. If U = 0 the returned point is the origin of the XAxis and the YAxis of the parabola and it is the vertex of the parabola. P = S + F * (U * U * XDir + * U * YDir) where S is the vertex of the parabola, XDir the XDirection and YDir the YDirection of the parabola's local coordinate system. """ def D1(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d) -> None: """ Returns the point P of parameter U and the first derivative V1. """ def D2(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d) -> None: """ Returns the point P of parameter U, the first and second derivatives V1 and V2. """ def D3(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d,V3 : OCP.gp.gp_Vec2d) -> None: """ Returns the point P of parameter U, the first second and third derivatives V1 V2 and V3. """ def DN(self,U : float,N : int) -> OCP.gp.gp_Vec2d: """ For the point of parameter U of this parabola, computes the vector corresponding to the Nth derivative. Exceptions Standard_RangeError if N is less than 1. """ def DecrementRefCounter(self) -> int: """ Decrements the reference counter of this object; returns the decremented value """ def Delete(self) -> None: """ Memory deallocator for transient classes """ def Directrix(self) -> OCP.gp.gp_Ax2d: """ The directrix is parallel to the "YAxis" of the parabola. The "Location" point of the directrix is the intersection point between the directrix and the symmetry axis ("XAxis") of the parabola. """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def DynamicType(self) -> OCP.Standard.Standard_Type: """ None """ def Eccentricity(self) -> float: """ Returns the eccentricity e = 1.0 """ def FirstParameter(self) -> float: """ Returns RealFirst from Standard. """ def Focal(self) -> float: """ Computes the focal length of this parabola. The focal length is the distance between the apex and the focus of the parabola. """ def Focus(self) -> OCP.gp.gp_Pnt2d: """ Computes the focus of this parabola The focus is on the positive side of the "X Axis" of the local coordinate system of the parabola. """ def GetRefCount(self) -> int: """ Get the reference counter of this object """ def IncrementRefCounter(self) -> None: """ Increments the reference counter of this object """ def IsCN(self,N : int) -> bool: """ Returns True, the order of continuity of a conic is infinite. """ def IsClosed(self) -> bool: """ Returns False """ @overload def IsInstance(self,theType : OCP.Standard.Standard_Type) -> bool: """ Returns a true value if this is an instance of Type. Returns a true value if this is an instance of TypeName. """ @overload def IsInstance(self,theTypeName : str) -> bool: ... @overload def IsKind(self,theTypeName : str) -> bool: """ Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. """ @overload def IsKind(self,theType : OCP.Standard.Standard_Type) -> bool: ... def IsPeriodic(self) -> bool: """ Returns False """ def LastParameter(self) -> float: """ Returns RealLast from Standard. """ def Location(self) -> OCP.gp.gp_Pnt2d: """ Returns the location point of the conic. For the circle, the ellipse and the hyperbola it is the center of the conic. For the parabola it is the vertex of the parabola. """ @overload def Mirror(self,P : OCP.gp.gp_Pnt2d) -> None: """ Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirror(self,A : OCP.gp.gp_Ax2d) -> None: ... @overload def Mirrored(self,A : OCP.gp.gp_Ax2d) -> Geom2d_Geometry: """ None None """ @overload def Mirrored(self,P : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: ... def Parab2d(self) -> OCP.gp.gp_Parab2d: """ Returns the non persistent parabola from gp with the same geometric properties as . """ def Parameter(self) -> float: """ Computes the parameter of this parabola, which is the distance between its focus and its directrix. This distance is twice the focal length. If P is the parameter of the parabola, the equation of the parabola in its local coordinate system is: Y**2 = 2.*P*X. """ def ParametricTransformation(self,T : OCP.gp.gp_Trsf2d) -> float: """ Returns a coefficient to compute the parameter on the transformed curve for the transform of the point on . """ def Period(self) -> float: """ Returns the period of this curve. raises if the curve is not periodic """ def Position(self) -> OCP.gp.gp_Ax22d: """ Returns the local coordinates system of the conic. """ def Reverse(self) -> None: """ Reverses the direction of parameterization of . The local coordinate system of the conic is modified. """ def Reversed(self) -> Geom2d_Curve: """ Creates a reversed duplicate Changes the orientation of this curve. The first and last parameters are not changed, but the parametric direction of the curve is reversed. If the curve is bounded: - the start point of the initial curve becomes the end point of the reversed curve, and - the end point of the initial curve becomes the start point of the reversed curve. - Reversed creates a new curve. """ def ReversedParameter(self,U : float) -> float: """ Computes the parameter on the reversed parabola for the point of parameter U on this parabola. For a parabola, the returned value is -U. """ def Rotate(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> None: """ Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. """ def Rotated(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> Geom2d_Geometry: """ None """ def Scale(self,P : OCP.gp.gp_Pnt2d,S : float) -> None: """ Scales a Geometry. S is the scaling value. """ def Scaled(self,P : OCP.gp.gp_Pnt2d,S : float) -> Geom2d_Geometry: """ None """ def SetAxis(self,theA : OCP.gp.gp_Ax22d) -> None: """ Modifies this conic, redefining its local coordinate system partially, by assigning theA as its axis """ def SetFocal(self,Focal : float) -> None: """ Assigns the value Focal to the focal length of this parabola. Exceptions Standard_ConstructionError if Focal is negative. """ def SetLocation(self,theP : OCP.gp.gp_Pnt2d) -> None: """ Modifies this conic, redefining its local coordinate system partially, by assigning theP as its origin. """ def SetParab2d(self,Prb : OCP.gp.gp_Parab2d) -> None: """ Converts the gp_Parab2d parabola Prb into this parabola. """ def SetXAxis(self,theAX : OCP.gp.gp_Ax2d) -> None: """ Assigns the origin and unit vector of axis theA to the origin of the local coordinate system of this conic and X Direction. The other unit vector of the local coordinate system of this conic is recomputed normal to theA, without changing the orientation of the local coordinate system (right-handed or left-handed). """ def SetYAxis(self,theAY : OCP.gp.gp_Ax2d) -> None: """ Assigns the origin and unit vector of axis theA to the origin of the local coordinate system of this conic and Y Direction. The other unit vector of the local coordinate system of this conic is recomputed normal to theA, without changing the orientation of the local coordinate system (right-handed or left-handed). """ def This(self) -> OCP.Standard.Standard_Transient: """ Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. """ def Transform(self,T : OCP.gp.gp_Trsf2d) -> None: """ Applies the transformation T to this parabola. """ def Transformed(self,T : OCP.gp.gp_Trsf2d) -> Geom2d_Geometry: """ None """ def TransformedParameter(self,U : float,T : OCP.gp.gp_Trsf2d) -> float: """ Computes the parameter on the transformed parabola, for the point of parameter U on this parabola. For a parabola, the returned value is equal to U multiplied by the scale factor of transformation T. """ @overload def Translate(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> None: """ Translates a Geometry. V is the vector of the translation. Translates a Geometry from the point P1 to the point P2. """ @overload def Translate(self,V : OCP.gp.gp_Vec2d) -> None: ... @overload def Translated(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: """ None None """ @overload def Translated(self,V : OCP.gp.gp_Vec2d) -> Geom2d_Geometry: ... def Value(self,U : float) -> OCP.gp.gp_Pnt2d: """ Computes the point of parameter U on . If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. """ def XAxis(self) -> OCP.gp.gp_Ax2d: """ Returns the "XAxis" of the conic. This axis defines the origin of parametrization of the conic. This axis and the "Yaxis" define the local coordinate system of the conic. -C++: return const& """ def YAxis(self) -> OCP.gp.gp_Ax2d: """ Returns the "YAxis" of the conic. The "YAxis" is perpendicular to the "Xaxis". """ @overload def __init__(self,MirrorAxis : OCP.gp.gp_Ax2d,Focal : float,Sense : bool=True) -> None: ... @overload def __init__(self,Axis : OCP.gp.gp_Ax22d,Focal : float) -> None: ... @overload def __init__(self,D : OCP.gp.gp_Ax2d,F : OCP.gp.gp_Pnt2d) -> None: ... @overload def __init__(self,Prb : OCP.gp.gp_Parab2d) -> None: ... @staticmethod def get_type_descriptor_s() -> OCP.Standard.Standard_Type: """ None """ @staticmethod def get_type_name_s() -> str: """ None """ pass class Geom2d_CartesianPoint(Geom2d_Point, Geom2d_Geometry, OCP.Standard.Standard_Transient): """ Describes a point in 2D space. A Geom2d_CartesianPoint is defined by a gp_Pnt2d point, with its two Cartesian coordinates X and Y.Describes a point in 2D space. A Geom2d_CartesianPoint is defined by a gp_Pnt2d point, with its two Cartesian coordinates X and Y.Describes a point in 2D space. A Geom2d_CartesianPoint is defined by a gp_Pnt2d point, with its two Cartesian coordinates X and Y. """ def Coord(self) -> tuple[float, float]: """ Returns the coordinates of . """ def Copy(self) -> Geom2d_Geometry: """ None """ def DecrementRefCounter(self) -> int: """ Decrements the reference counter of this object; returns the decremented value """ def Delete(self) -> None: """ Memory deallocator for transient classes """ def Distance(self,Other : Geom2d_Point) -> float: """ computes the distance between and . """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def DynamicType(self) -> OCP.Standard.Standard_Type: """ None """ def GetRefCount(self) -> int: """ Get the reference counter of this object """ def IncrementRefCounter(self) -> None: """ Increments the reference counter of this object """ @overload def IsInstance(self,theType : OCP.Standard.Standard_Type) -> bool: """ Returns a true value if this is an instance of Type. Returns a true value if this is an instance of TypeName. """ @overload def IsInstance(self,theTypeName : str) -> bool: ... @overload def IsKind(self,theTypeName : str) -> bool: """ Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. """ @overload def IsKind(self,theType : OCP.Standard.Standard_Type) -> bool: ... @overload def Mirror(self,P : OCP.gp.gp_Pnt2d) -> None: """ Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirror(self,A : OCP.gp.gp_Ax2d) -> None: ... @overload def Mirrored(self,A : OCP.gp.gp_Ax2d) -> Geom2d_Geometry: """ None None """ @overload def Mirrored(self,P : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: ... def Pnt2d(self) -> OCP.gp.gp_Pnt2d: """ Returns a non persistent cartesian point with the same coordinates as . -C++: return const& """ def Rotate(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> None: """ Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. """ def Rotated(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> Geom2d_Geometry: """ None """ def Scale(self,P : OCP.gp.gp_Pnt2d,S : float) -> None: """ Scales a Geometry. S is the scaling value. """ def Scaled(self,P : OCP.gp.gp_Pnt2d,S : float) -> Geom2d_Geometry: """ None """ def SetCoord(self,X : float,Y : float) -> None: """ Set to X, Y coordinates. """ def SetPnt2d(self,P : OCP.gp.gp_Pnt2d) -> None: """ Set to P.X(), P.Y() coordinates. """ def SetX(self,X : float) -> None: """ Changes the X coordinate of me. """ def SetY(self,Y : float) -> None: """ Changes the Y coordinate of me. """ def SquareDistance(self,Other : Geom2d_Point) -> float: """ computes the square distance between and . """ def This(self) -> OCP.Standard.Standard_Transient: """ Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. """ def Transform(self,T : OCP.gp.gp_Trsf2d) -> None: """ None """ def Transformed(self,T : OCP.gp.gp_Trsf2d) -> Geom2d_Geometry: """ None """ @overload def Translate(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> None: """ Translates a Geometry. V is the vector of the translation. Translates a Geometry from the point P1 to the point P2. """ @overload def Translate(self,V : OCP.gp.gp_Vec2d) -> None: ... @overload def Translated(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: """ None None """ @overload def Translated(self,V : OCP.gp.gp_Vec2d) -> Geom2d_Geometry: ... def X(self) -> float: """ Returns the X coordinate of . """ def Y(self) -> float: """ Returns the Y coordinate of . """ @overload def __init__(self,X : float,Y : float) -> None: ... @overload def __init__(self,P : OCP.gp.gp_Pnt2d) -> None: ... @staticmethod def get_type_descriptor_s() -> OCP.Standard.Standard_Type: """ None """ @staticmethod def get_type_name_s() -> str: """ None """ pass class Geom2d_Transformation(OCP.Standard.Standard_Transient): """ The class Transformation allows to create Translation, Rotation, Symmetry, Scaling and complex transformations obtained by combination of the previous elementary transformations. The Transformation class can also be used to construct complex transformations by combining these elementary transformations. However, these transformations can never change the type of an object. For example, the projection transformation can change a circle into an ellipse, and therefore change the real type of the object. Such a transformation is forbidden in this environment and cannot be a Geom2d_Transformation. The transformation can be represented as follow :The class Transformation allows to create Translation, Rotation, Symmetry, Scaling and complex transformations obtained by combination of the previous elementary transformations. The Transformation class can also be used to construct complex transformations by combining these elementary transformations. However, these transformations can never change the type of an object. For example, the projection transformation can change a circle into an ellipse, and therefore change the real type of the object. Such a transformation is forbidden in this environment and cannot be a Geom2d_Transformation. The transformation can be represented as follow :The class Transformation allows to create Translation, Rotation, Symmetry, Scaling and complex transformations obtained by combination of the previous elementary transformations. The Transformation class can also be used to construct complex transformations by combining these elementary transformations. However, these transformations can never change the type of an object. For example, the projection transformation can change a circle into an ellipse, and therefore change the real type of the object. Such a transformation is forbidden in this environment and cannot be a Geom2d_Transformation. The transformation can be represented as follow : """ def Copy(self) -> Geom2d_Transformation: """ Creates a new object, which is a copy of this transformation. """ def DecrementRefCounter(self) -> int: """ Decrements the reference counter of this object; returns the decremented value """ def Delete(self) -> None: """ Memory deallocator for transient classes """ def DynamicType(self) -> OCP.Standard.Standard_Type: """ None """ def Form(self) -> OCP.gp.gp_TrsfForm: """ Returns the nature of this transformation as a value of the gp_TrsfForm enumeration. Returns the nature of the transformation. It can be Identity, Rotation, Translation, PntMirror, Ax1Mirror, Scale, CompoundTrsf """ def GetRefCount(self) -> int: """ Get the reference counter of this object """ def IncrementRefCounter(self) -> None: """ Increments the reference counter of this object """ def Invert(self) -> None: """ Computes the inverse of this transformation. and assigns the result to this transformatio """ def Inverted(self) -> Geom2d_Transformation: """ Computes the inverse of this transformation and creates a new one. Raises ConstructionError if the transformation is singular. This means that the ScaleFactor is lower or equal to Resolution from package gp. """ @overload def IsInstance(self,theType : OCP.Standard.Standard_Type) -> bool: """ Returns a true value if this is an instance of Type. Returns a true value if this is an instance of TypeName. """ @overload def IsInstance(self,theTypeName : str) -> bool: ... @overload def IsKind(self,theTypeName : str) -> bool: """ Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. """ @overload def IsKind(self,theType : OCP.Standard.Standard_Type) -> bool: ... def IsNegative(self) -> bool: """ Checks whether this transformation is an indirect transformation: returns true if the determinant of the matrix of the vectorial part of the transformation is less than 0. """ def Multiplied(self,Other : Geom2d_Transformation) -> Geom2d_Transformation: """ Computes the transformation composed with Other and . * Other. Returns a new transformation """ def Multiply(self,Other : Geom2d_Transformation) -> None: """ Computes the transformation composed with Other and . = * Other. """ def Power(self,N : int) -> None: """ Raised if N < 0 and if the transformation is not inversible """ def Powered(self,N : int) -> Geom2d_Transformation: """ Raised if N < 0 and if the transformation is not inversible """ def PreMultiply(self,Other : Geom2d_Transformation) -> None: """ Computes the matrix of the transformation composed with and Other. = Other * """ def ScaleFactor(self) -> float: """ Returns the scale value of the transformation. """ @overload def SetMirror(self,A : OCP.gp.gp_Ax2d) -> None: """ Makes the transformation into a symmetrical transformation with respect to a point P. P is the center of the symmetry. Makes the transformation into a symmetrical transformation with respect to an axis A. A is the center of the axial symmetry. """ @overload def SetMirror(self,P : OCP.gp.gp_Pnt2d) -> None: ... def SetRotation(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> None: """ Assigns to this transformation the geometric properties of a rotation at angle Ang (in radians) about point P. """ def SetScale(self,P : OCP.gp.gp_Pnt2d,S : float) -> None: """ Makes the transformation into a scale. P is the center of the scale and S is the scaling value. """ @overload def SetTransformation(self,FromSystem1 : OCP.gp.gp_Ax2d,ToSystem2 : OCP.gp.gp_Ax2d) -> None: """ Makes a transformation allowing passage from the coordinate system "FromSystem1" to the coordinate system "ToSystem2". Makes the transformation allowing passage from the basic coordinate system {P(0.,0.,0.), VX (1.,0.,0.), VY (0.,1.,0.)} to the local coordinate system defined with the Ax2d ToSystem. """ @overload def SetTransformation(self,ToSystem : OCP.gp.gp_Ax2d) -> None: ... @overload def SetTranslation(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> None: """ Makes the transformation into a translation. V is the vector of the translation. Makes the transformation into a translation from the point P1 to the point P2. """ @overload def SetTranslation(self,V : OCP.gp.gp_Vec2d) -> None: ... def SetTrsf2d(self,T : OCP.gp.gp_Trsf2d) -> None: """ Makes the transformation into a transformation T from package gp. """ def This(self) -> OCP.Standard.Standard_Transient: """ Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. """ def Transforms(self) -> tuple[float, float]: """ Applies the transformation to the triplet {X, Y}. """ def Trsf2d(self) -> OCP.gp.gp_Trsf2d: """ Converts this transformation into a gp_Trsf2d transformation. Returns a non persistent copy of . -C++: return const& """ def Value(self,Row : int,Col : int) -> float: """ Returns the coefficients of the global matrix of transformation. It is a 2 rows X 3 columns matrix. """ def __imul__(self,Other : Geom2d_Transformation) -> None: """ None """ @overload def __init__(self) -> None: ... @overload def __init__(self,T : OCP.gp.gp_Trsf2d) -> None: ... def __mul__(self,Other : Geom2d_Transformation) -> Geom2d_Transformation: """ None """ def __rmul__(self,Other : Geom2d_Transformation) -> Geom2d_Transformation: """ None """ @staticmethod def get_type_descriptor_s() -> OCP.Standard.Standard_Type: """ None """ @staticmethod def get_type_name_s() -> str: """ None """ pass class Geom2d_TrimmedCurve(Geom2d_BoundedCurve, Geom2d_Curve, Geom2d_Geometry, OCP.Standard.Standard_Transient): """ Defines a portion of a curve limited by two values of parameters inside the parametric domain of the curve. The trimmed curve is defined by: - the basis curve, and - the two parameter values which limit it. The trimmed curve can either have the same orientation as the basis curve or the opposite orientation.Defines a portion of a curve limited by two values of parameters inside the parametric domain of the curve. The trimmed curve is defined by: - the basis curve, and - the two parameter values which limit it. The trimmed curve can either have the same orientation as the basis curve or the opposite orientation.Defines a portion of a curve limited by two values of parameters inside the parametric domain of the curve. The trimmed curve is defined by: - the basis curve, and - the two parameter values which limit it. The trimmed curve can either have the same orientation as the basis curve or the opposite orientation. """ def BasisCurve(self) -> Geom2d_Curve: """ Returns the basis curve. Warning This function does not return a constant reference. Consequently, any modification of the returned value directly modifies the trimmed curve. """ def Continuity(self) -> OCP.GeomAbs.GeomAbs_Shape: """ Returns the global continuity of the basis curve of this trimmed curve. C0 : only geometric continuity, C1 : continuity of the first derivative all along the Curve, C2 : continuity of the second derivative all along the Curve, C3 : continuity of the third derivative all along the Curve, CN : the order of continuity is infinite. """ def Copy(self) -> Geom2d_Geometry: """ Creates a new object, which is a copy of this trimmed curve. """ def D0(self,U : float,P : OCP.gp.gp_Pnt2d) -> None: """ If the basis curve is an OffsetCurve sometimes it is not possible to do the evaluation of the curve at the parameter U (see class OffsetCurve). """ def D1(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d) -> None: """ Raised if the continuity of the curve is not C1. """ def D2(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d) -> None: """ Raised if the continuity of the curve is not C2. """ def D3(self,U : float,P : OCP.gp.gp_Pnt2d,V1 : OCP.gp.gp_Vec2d,V2 : OCP.gp.gp_Vec2d,V3 : OCP.gp.gp_Vec2d) -> None: """ Raised if the continuity of the curve is not C3. """ def DN(self,U : float,N : int) -> OCP.gp.gp_Vec2d: """ For the point of parameter U of this trimmed curve, computes the vector corresponding to the Nth derivative. Warning The returned derivative vector has the same orientation as the derivative vector of the basis curve, even if the trimmed curve does not have the same orientation as the basis curve. Exceptions Standard_RangeError if N is less than 1. geometric transformations """ def DecrementRefCounter(self) -> int: """ Decrements the reference counter of this object; returns the decremented value """ def Delete(self) -> None: """ Memory deallocator for transient classes """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def DynamicType(self) -> OCP.Standard.Standard_Type: """ None """ def EndPoint(self) -> OCP.gp.gp_Pnt2d: """ Returns the end point of . This point is the evaluation of the curve for the "LastParameter". """ def FirstParameter(self) -> float: """ Returns the value of the first parameter of . The first parameter is the parameter of the "StartPoint" of the trimmed curve. """ def GetRefCount(self) -> int: """ Get the reference counter of this object """ def IncrementRefCounter(self) -> None: """ Increments the reference counter of this object """ def IsCN(self,N : int) -> bool: """ --- Purpose Returns True if the order of continuity of the trimmed curve is N. A trimmed curve is at least "C0" continuous. Warnings : The continuity of the trimmed curve can be greater than the continuity of the basis curve because you consider only a part of the basis curve. Raised if N < 0. """ def IsClosed(self) -> bool: """ Returns True if the distance between the StartPoint and the EndPoint is lower or equal to Resolution from package gp. """ @overload def IsInstance(self,theType : OCP.Standard.Standard_Type) -> bool: """ Returns a true value if this is an instance of Type. Returns a true value if this is an instance of TypeName. """ @overload def IsInstance(self,theTypeName : str) -> bool: ... @overload def IsKind(self,theTypeName : str) -> bool: """ Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. """ @overload def IsKind(self,theType : OCP.Standard.Standard_Type) -> bool: ... def IsPeriodic(self) -> bool: """ Always returns FALSE (independently of the type of basis curve). """ def LastParameter(self) -> float: """ Returns the value of the last parameter of . The last parameter is the parameter of the "EndPoint" of the trimmed curve. """ @overload def Mirror(self,P : OCP.gp.gp_Pnt2d) -> None: """ Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirror(self,A : OCP.gp.gp_Ax2d) -> None: ... @overload def Mirrored(self,A : OCP.gp.gp_Ax2d) -> Geom2d_Geometry: """ None None """ @overload def Mirrored(self,P : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: ... def ParametricTransformation(self,T : OCP.gp.gp_Trsf2d) -> float: """ Returns a coefficient to compute the parameter on the transformed curve for the transform of the point on . """ def Period(self) -> float: """ Returns the period of the basis curve of this trimmed curve. Exceptions Standard_NoSuchObject if the basis curve is not periodic. """ def Reverse(self) -> None: """ Changes the direction of parametrization of . The first and the last parametric values are modified. The "StartPoint" of the initial curve becomes the "EndPoint" of the reversed curve and the "EndPoint" of the initial curve becomes the "StartPoint" of the reversed curve. Example - If the trimmed curve is defined by: - a basis curve whose parameter range is [ 0.,1. ], and - the two trim values U1 (first parameter) and U2 (last parameter), the reversed trimmed curve is defined by: - the reversed basis curve, whose parameter range is still [ 0.,1. ], and - the two trim values 1. - U2 (first parameter) and 1. - U1 (last parameter). """ def Reversed(self) -> Geom2d_Curve: """ Creates a reversed duplicate Changes the orientation of this curve. The first and last parameters are not changed, but the parametric direction of the curve is reversed. If the curve is bounded: - the start point of the initial curve becomes the end point of the reversed curve, and - the end point of the initial curve becomes the start point of the reversed curve. - Reversed creates a new curve. """ def ReversedParameter(self,U : float) -> float: """ Returns the parameter on the reversed curve for the point of parameter U on . """ def Rotate(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> None: """ Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. """ def Rotated(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> Geom2d_Geometry: """ None """ def Scale(self,P : OCP.gp.gp_Pnt2d,S : float) -> None: """ Scales a Geometry. S is the scaling value. """ def Scaled(self,P : OCP.gp.gp_Pnt2d,S : float) -> Geom2d_Geometry: """ None """ def SetTrim(self,U1 : float,U2 : float,Sense : bool=True,theAdjustPeriodic : bool=True) -> None: """ Changes this trimmed curve, by redefining the parameter values U1 and U2, which limit its basis curve. Note: If the basis curve is periodic, the trimmed curve has the same orientation as the basis curve if Sense is true (default value) or the opposite orientation if Sense is false. Warning If the basis curve is periodic and theAdjustPeriodic is True, the bounds of the trimmed curve may be different from U1 and U2 if the parametric origin of the basis curve is within the arc of the trimmed curve. In this case, the modified parameter will be equal to U1 or U2 plus or minus the period. If theAdjustPeriodic is False, parameters U1 and U2 will stay unchanged. Exceptions Standard_ConstructionError if: - the basis curve is not periodic, and either U1 or U2 are outside the bounds of the basis curve, or - U1 is equal to U2. """ def StartPoint(self) -> OCP.gp.gp_Pnt2d: """ Returns the start point of . This point is the evaluation of the curve from the "FirstParameter". value and derivatives Warnings : The returned derivatives have the same orientation as the derivatives of the basis curve. """ def This(self) -> OCP.Standard.Standard_Transient: """ Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. """ def Transform(self,T : OCP.gp.gp_Trsf2d) -> None: """ Applies the transformation T to this trimmed curve. Warning The basis curve is also modified. """ def Transformed(self,T : OCP.gp.gp_Trsf2d) -> Geom2d_Geometry: """ None """ def TransformedParameter(self,U : float,T : OCP.gp.gp_Trsf2d) -> float: """ Returns the parameter on the transformed curve for the transform of the point of parameter U on . """ @overload def Translate(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> None: """ Translates a Geometry. V is the vector of the translation. Translates a Geometry from the point P1 to the point P2. """ @overload def Translate(self,V : OCP.gp.gp_Vec2d) -> None: ... @overload def Translated(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: """ None None """ @overload def Translated(self,V : OCP.gp.gp_Vec2d) -> Geom2d_Geometry: ... def Value(self,U : float) -> OCP.gp.gp_Pnt2d: """ Computes the point of parameter U on . If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. """ def __init__(self,C : Geom2d_Curve,U1 : float,U2 : float,Sense : bool=True,theAdjustPeriodic : bool=True) -> None: ... @staticmethod def get_type_descriptor_s() -> OCP.Standard.Standard_Type: """ None """ @staticmethod def get_type_name_s() -> str: """ None """ pass class Geom2d_UndefinedDerivative(Exception, BaseException): class type(): pass __cause__: getset_descriptor # value = __context__: getset_descriptor # value = __dict__: mappingproxy # value = mappingproxy({'__module__': 'OCP.Geom2d', '__weakref__': , '__doc__': None}) __suppress_context__: member_descriptor # value = __traceback__: getset_descriptor # value = __weakref__: getset_descriptor # value = args: getset_descriptor # value = pass class Geom2d_UndefinedValue(Exception, BaseException): class type(): pass __cause__: getset_descriptor # value = __context__: getset_descriptor # value = __dict__: mappingproxy # value = mappingproxy({'__module__': 'OCP.Geom2d', '__weakref__': , '__doc__': None}) __suppress_context__: member_descriptor # value = __traceback__: getset_descriptor # value = __weakref__: getset_descriptor # value = args: getset_descriptor # value = pass class Geom2d_Direction(Geom2d_Vector, Geom2d_Geometry, OCP.Standard.Standard_Transient): """ The class Direction specifies a vector that is never null. It is a unit vector.The class Direction specifies a vector that is never null. It is a unit vector.The class Direction specifies a vector that is never null. It is a unit vector. """ def Angle(self,Other : Geom2d_Vector) -> float: """ Computes the angular value, in radians, between this vector and vector Other. The result is a value between -Pi and Pi. The orientation is from this vector to vector Other. Raises VectorWithNullMagnitude if one of the two vectors is a vector with null magnitude because the angular value is indefinite. """ def Coord(self) -> tuple[float, float]: """ Returns the coordinates of . """ def Copy(self) -> Geom2d_Geometry: """ Creates a new object which is a copy of this unit vector. """ def Crossed(self,Other : Geom2d_Vector) -> float: """ Computes the cross product between and . """ def DecrementRefCounter(self) -> int: """ Decrements the reference counter of this object; returns the decremented value """ def Delete(self) -> None: """ Memory deallocator for transient classes """ def Dir2d(self) -> OCP.gp.gp_Dir2d: """ Converts this unit vector into a gp_Dir2d unit vector. """ def Dot(self,Other : Geom2d_Vector) -> float: """ Returns the scalar product of 2 Vectors. """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def DynamicType(self) -> OCP.Standard.Standard_Type: """ None """ def GetRefCount(self) -> int: """ Get the reference counter of this object """ def IncrementRefCounter(self) -> None: """ Increments the reference counter of this object """ @overload def IsInstance(self,theType : OCP.Standard.Standard_Type) -> bool: """ Returns a true value if this is an instance of Type. Returns a true value if this is an instance of TypeName. """ @overload def IsInstance(self,theTypeName : str) -> bool: ... @overload def IsKind(self,theTypeName : str) -> bool: """ Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. """ @overload def IsKind(self,theType : OCP.Standard.Standard_Type) -> bool: ... def Magnitude(self) -> float: """ returns 1.0 """ @overload def Mirror(self,P : OCP.gp.gp_Pnt2d) -> None: """ Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirror(self,A : OCP.gp.gp_Ax2d) -> None: ... @overload def Mirrored(self,A : OCP.gp.gp_Ax2d) -> Geom2d_Geometry: """ None None """ @overload def Mirrored(self,P : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: ... def Reverse(self) -> None: """ Reverses the vector . """ def Reversed(self) -> Geom2d_Vector: """ Returns a copy of reversed. """ def Rotate(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> None: """ Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. """ def Rotated(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> Geom2d_Geometry: """ None """ def Scale(self,P : OCP.gp.gp_Pnt2d,S : float) -> None: """ Scales a Geometry. S is the scaling value. """ def Scaled(self,P : OCP.gp.gp_Pnt2d,S : float) -> Geom2d_Geometry: """ None """ def SetCoord(self,X : float,Y : float) -> None: """ Assigns the coordinates X and Y to this unit vector, then normalizes it. Exceptions Standard_ConstructionError if Sqrt(X*X + Y*Y) is less than or equal to gp::Resolution(). """ def SetDir2d(self,V : OCP.gp.gp_Dir2d) -> None: """ Converts the gp_Dir2d unit vector V into this unit vector. """ def SetX(self,X : float) -> None: """ Assigns a value to the X coordinate of this unit vector, then normalizes it. Exceptions Standard_ConstructionError if the value assigned causes the magnitude of the vector to become less than or equal to gp::Resolution(). """ def SetY(self,Y : float) -> None: """ Assigns a value to the Y coordinate of this unit vector, then normalizes it. Exceptions Standard_ConstructionError if the value assigned causes the magnitude of the vector to become less than or equal to gp::Resolution(). """ def SquareMagnitude(self) -> float: """ returns 1.0 """ def This(self) -> OCP.Standard.Standard_Transient: """ Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. """ def Transform(self,T : OCP.gp.gp_Trsf2d) -> None: """ Applies the transformation T to this unit vector, then normalizes it. """ def Transformed(self,T : OCP.gp.gp_Trsf2d) -> Geom2d_Geometry: """ None """ @overload def Translate(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> None: """ Translates a Geometry. V is the vector of the translation. Translates a Geometry from the point P1 to the point P2. """ @overload def Translate(self,V : OCP.gp.gp_Vec2d) -> None: ... @overload def Translated(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: """ None None """ @overload def Translated(self,V : OCP.gp.gp_Vec2d) -> Geom2d_Geometry: ... def Vec2d(self) -> OCP.gp.gp_Vec2d: """ Returns a non persistent copy of . """ def X(self) -> float: """ Returns the X coordinate of . """ def Y(self) -> float: """ Returns the Y coordinate of . """ @overload def __init__(self,X : float,Y : float) -> None: ... @overload def __init__(self,V : OCP.gp.gp_Dir2d) -> None: ... def __pow__(self,Other : Geom2d_Vector) -> float: """ None """ @staticmethod def get_type_descriptor_s() -> OCP.Standard.Standard_Type: """ None """ @staticmethod def get_type_name_s() -> str: """ None """ pass class Geom2d_VectorWithMagnitude(Geom2d_Vector, Geom2d_Geometry, OCP.Standard.Standard_Transient): """ Defines a vector with magnitude. A vector with magnitude can have a zero length.Defines a vector with magnitude. A vector with magnitude can have a zero length.Defines a vector with magnitude. A vector with magnitude can have a zero length. """ def Add(self,Other : Geom2d_Vector) -> None: """ Adds the Vector Other to . """ def Added(self,Other : Geom2d_Vector) -> Geom2d_VectorWithMagnitude: """ Adds the vector Other to . """ def Angle(self,Other : Geom2d_Vector) -> float: """ Computes the angular value, in radians, between this vector and vector Other. The result is a value between -Pi and Pi. The orientation is from this vector to vector Other. Raises VectorWithNullMagnitude if one of the two vectors is a vector with null magnitude because the angular value is indefinite. """ def Coord(self) -> tuple[float, float]: """ Returns the coordinates of . """ def Copy(self) -> Geom2d_Geometry: """ Creates a new object which is a copy of this vector. """ def Crossed(self,Other : Geom2d_Vector) -> float: """ Computes the cross product between and Other ^ Other. A new vector is returned. """ def DecrementRefCounter(self) -> int: """ Decrements the reference counter of this object; returns the decremented value """ def Delete(self) -> None: """ Memory deallocator for transient classes """ def Divide(self,Scalar : float) -> None: """ Divides by a scalar. """ def Divided(self,Scalar : float) -> Geom2d_VectorWithMagnitude: """ Divides by a scalar. A new vector is returned. """ def Dot(self,Other : Geom2d_Vector) -> float: """ Returns the scalar product of 2 Vectors. """ def DumpJson(self,theOStream : io.BytesIO,theDepth : int=-1) -> None: """ Dumps the content of me into the stream """ def DynamicType(self) -> OCP.Standard.Standard_Type: """ None """ def GetRefCount(self) -> int: """ Get the reference counter of this object """ def IncrementRefCounter(self) -> None: """ Increments the reference counter of this object """ @overload def IsInstance(self,theType : OCP.Standard.Standard_Type) -> bool: """ Returns a true value if this is an instance of Type. Returns a true value if this is an instance of TypeName. """ @overload def IsInstance(self,theTypeName : str) -> bool: ... @overload def IsKind(self,theTypeName : str) -> bool: """ Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. """ @overload def IsKind(self,theType : OCP.Standard.Standard_Type) -> bool: ... def Magnitude(self) -> float: """ Returns the magnitude of . """ @overload def Mirror(self,P : OCP.gp.gp_Pnt2d) -> None: """ Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. """ @overload def Mirror(self,A : OCP.gp.gp_Ax2d) -> None: ... @overload def Mirrored(self,A : OCP.gp.gp_Ax2d) -> Geom2d_Geometry: """ None None """ @overload def Mirrored(self,P : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: ... def Multiplied(self,Scalar : float) -> Geom2d_VectorWithMagnitude: """ Computes the product of the vector by a scalar. A new vector is returned. """ def Multiply(self,Scalar : float) -> None: """ Computes the product of the vector by a scalar. """ def Normalize(self) -> None: """ Normalizes . """ def Normalized(self) -> Geom2d_VectorWithMagnitude: """ Returns a copy of Normalized. """ def Reverse(self) -> None: """ Reverses the vector . """ def Reversed(self) -> Geom2d_Vector: """ Returns a copy of reversed. """ def Rotate(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> None: """ Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. """ def Rotated(self,P : OCP.gp.gp_Pnt2d,Ang : float) -> Geom2d_Geometry: """ None """ def Scale(self,P : OCP.gp.gp_Pnt2d,S : float) -> None: """ Scales a Geometry. S is the scaling value. """ def Scaled(self,P : OCP.gp.gp_Pnt2d,S : float) -> Geom2d_Geometry: """ None """ def SetCoord(self,X : float,Y : float) -> None: """ Set to X, Y coordinates. """ def SetVec2d(self,V : OCP.gp.gp_Vec2d) -> None: """ None """ def SetX(self,X : float) -> None: """ Changes the X coordinate of . """ def SetY(self,Y : float) -> None: """ Changes the Y coordinate of """ def SquareMagnitude(self) -> float: """ Returns the square magnitude of . """ def Subtract(self,Other : Geom2d_Vector) -> None: """ Subtracts the Vector Other to . """ def Subtracted(self,Other : Geom2d_Vector) -> Geom2d_VectorWithMagnitude: """ Subtracts the vector Other to . A new vector is returned. """ def This(self) -> OCP.Standard.Standard_Transient: """ Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. """ def Transform(self,T : OCP.gp.gp_Trsf2d) -> None: """ Applies the transformation T to this vector. """ def Transformed(self,T : OCP.gp.gp_Trsf2d) -> Geom2d_Geometry: """ None """ @overload def Translate(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> None: """ Translates a Geometry. V is the vector of the translation. Translates a Geometry from the point P1 to the point P2. """ @overload def Translate(self,V : OCP.gp.gp_Vec2d) -> None: ... @overload def Translated(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> Geom2d_Geometry: """ None None """ @overload def Translated(self,V : OCP.gp.gp_Vec2d) -> Geom2d_Geometry: ... def Vec2d(self) -> OCP.gp.gp_Vec2d: """ Returns a non persistent copy of . """ def X(self) -> float: """ Returns the X coordinate of . """ def Y(self) -> float: """ Returns the Y coordinate of . """ def __add__(self,Other : Geom2d_Vector) -> Geom2d_VectorWithMagnitude: """ None """ def __iadd__(self,Other : Geom2d_Vector) -> None: """ None """ def __imul__(self,Scalar : float) -> None: """ None """ @overload def __init__(self,V : OCP.gp.gp_Vec2d) -> None: ... @overload def __init__(self,P1 : OCP.gp.gp_Pnt2d,P2 : OCP.gp.gp_Pnt2d) -> None: ... @overload def __init__(self,X : float,Y : float) -> None: ... def __isub__(self,Other : Geom2d_Vector) -> None: """ None """ def __itruediv__(self,Scalar : float) -> None: """ None """ def __pow__(self,Other : Geom2d_Vector) -> float: """ None """ def __sub__(self,Other : Geom2d_Vector) -> Geom2d_VectorWithMagnitude: """ None """ def __truediv__(self,Scalar : float) -> Geom2d_VectorWithMagnitude: """ None """ @staticmethod def get_type_descriptor_s() -> OCP.Standard.Standard_Type: """ None """ @staticmethod def get_type_name_s() -> str: """ None """ pass