// SPDX-FileCopyrightText: Copyright (c) Ken Martin, Will Schroeder, Bill Lorensen
// SPDX-License-Identifier: BSD-3-Clause
/**
 * @class   vtkVideoSource
 * @brief   Superclass of video input devices for VTK
 *
 * vtkVideoSource is a superclass for video input interfaces for VTK.
 * The goal is to provide an interface which is very similar to the
 * interface of a VCR, where the 'tape' is an internal frame buffer
 * capable of holding a preset number of video frames.  Specialized
 * versions of this class record input from various video input sources.
 * This base class records input from a noise source.
 * @warning
 * You must call the ReleaseSystemResources() method before the application
 * exits.  Otherwise the application might hang while trying to exit.
 * @sa
 * vtkWin32VideoSource vtkMILVideoSource
 */

#ifndef vtkVideoSource_h
#define vtkVideoSource_h

#include "vtkIOVideoModule.h" // For export macro
#include "vtkImageAlgorithm.h"

#include <mutex> // for std::mutex

VTK_ABI_NAMESPACE_BEGIN
class vtkTimerLog;
class vtkMultiThreader;
class vtkScalarsToColors;

class VTKIOVIDEO_EXPORT vtkVideoSource : public vtkImageAlgorithm
{
public:
  static vtkVideoSource* New();
  vtkTypeMacro(vtkVideoSource, vtkImageAlgorithm);
  void PrintSelf(ostream& os, vtkIndent indent) override;

  /**
   * Record incoming video at the specified FrameRate.  The recording
   * continues indefinitely until Stop() is called.
   */
  virtual void Record();

  /**
   * Play through the 'tape' sequentially at the specified frame rate.
   * If you have just finished Recoding, you should call Rewind() first.
   */
  virtual void Play();

  /**
   * Stop recording or playing.
   */
  virtual void Stop();

  /**
   * Rewind to the frame with the earliest timestamp.  Record operations
   * will start on the following frame, therefore if you want to re-record
   * over this frame you must call Seek(-1) before calling Grab() or Record().
   */
  virtual void Rewind();

  /**
   * FastForward to the last frame that was recorded (i.e. to the frame
   * that has the most recent timestamp).
   */
  virtual void FastForward();

  /**
   * Seek forwards or backwards by the specified number of frames
   * (positive is forward, negative is backward).
   */
  virtual void Seek(int n);

  /**
   * Grab a single video frame.
   */
  virtual void Grab();

  ///@{
  /**
   * Are we in record mode? (record mode and play mode are mutually
   * exclusive).
   */
  vtkGetMacro(Recording, int);
  ///@}

  ///@{
  /**
   * Are we in play mode? (record mode and play mode are mutually
   * exclusive).
   */
  vtkGetMacro(Playing, int);
  ///@}

  ///@{
  /**
   * Set the full-frame size.  This must be an allowed size for the device,
   * the device may either refuse a request for an illegal frame size or
   * automatically choose a new frame size.
   * The default is usually 320x240x1, but can be device specific.
   * The 'depth' should always be 1 (unless you have a device that
   * can handle 3D acquisition).
   */
  virtual void SetFrameSize(int x, int y, int z);
  virtual void SetFrameSize(int dim[3]) { this->SetFrameSize(dim[0], dim[1], dim[2]); }
  vtkGetVector3Macro(FrameSize, int);
  ///@}

  ///@{
  /**
   * Request a particular frame rate (default 30 frames per second).
   */
  virtual void SetFrameRate(float rate);
  vtkGetMacro(FrameRate, float);
  ///@}

  ///@{
  /**
   * Set the output format.  This must be appropriate for device,
   * usually only VTK_LUMINANCE, VTK_RGB, and VTK_RGBA are supported.
   */
  virtual void SetOutputFormat(int format);
  void SetOutputFormatToLuminance() { this->SetOutputFormat(VTK_LUMINANCE); }
  void SetOutputFormatToRGB() { this->SetOutputFormat(VTK_RGB); }
  void SetOutputFormatToRGBA() { this->SetOutputFormat(VTK_RGBA); }
  vtkGetMacro(OutputFormat, int);
  ///@}

  ///@{
  /**
   * Set size of the frame buffer, i.e. the number of frames that
   * the 'tape' can store.
   */
  virtual void SetFrameBufferSize(int FrameBufferSize);
  vtkGetMacro(FrameBufferSize, int);
  ///@}

  ///@{
  /**
   * Set the number of frames to copy to the output on each execute.
   * The frames will be concatenated along the Z dimension, with the
   * most recent frame first.
   * Default: 1
   */
  vtkSetMacro(NumberOfOutputFrames, int);
  vtkGetMacro(NumberOfOutputFrames, int);
  ///@}

  ///@{
  /**
   * Set whether to automatically advance the buffer before each grab.
   * Default: on
   */
  vtkBooleanMacro(AutoAdvance, vtkTypeBool);
  vtkSetMacro(AutoAdvance, vtkTypeBool);
  vtkGetMacro(AutoAdvance, vtkTypeBool);
  ///@}

  ///@{
  /**
   * Set the clip rectangle for the frames.  The video will be clipped
   * before it is copied into the framebuffer.  Changing the ClipRegion
   * will destroy the current contents of the framebuffer.
   * The default ClipRegion is (0,VTK_INT_MAX,0,VTK_INT_MAX,0,VTK_INT_MAX).
   */
  virtual void SetClipRegion(int r[6]) { this->SetClipRegion(r[0], r[1], r[2], r[3], r[4], r[5]); }
  virtual void SetClipRegion(int x0, int x1, int y0, int y1, int z0, int z1);
  vtkGetVector6Macro(ClipRegion, int);
  ///@}

  ///@{
  /**
   * Get/Set the WholeExtent of the output.  This can be used to either
   * clip or pad the video frame.  This clipping/padding is done when
   * the frame is copied to the output, and does not change the contents
   * of the framebuffer.  This is useful e.g. for expanding
   * the output size to a power of two for texture mapping.  The
   * default is (0,-1,0,-1,0,-1) which causes the entire frame to be
   * copied to the output.
   */
  vtkSetVector6Macro(OutputWholeExtent, int);
  vtkGetVector6Macro(OutputWholeExtent, int);
  ///@}

  ///@{
  /**
   * Set/Get the pixel spacing.
   * Default: (1.0,1.0,1.0)
   */
  vtkSetVector3Macro(DataSpacing, double);
  vtkGetVector3Macro(DataSpacing, double);
  ///@}

  ///@{
  /**
   * Set/Get the coordinates of the lower, left corner of the frame.
   * Default: (0.0,0.0,0.0)
   */
  vtkSetVector3Macro(DataOrigin, double);
  vtkGetVector3Macro(DataOrigin, double);
  ///@}

  ///@{
  /**
   * For RGBA output only (4 scalar components), set the opacity.  This
   * will not modify the existing contents of the framebuffer, only
   * subsequently grabbed frames.
   */
  vtkSetMacro(Opacity, float);
  vtkGetMacro(Opacity, float);
  ///@}

  ///@{
  /**
   * This value is incremented each time a frame is grabbed.
   * reset it to zero (or any other value) at any time.
   */
  vtkGetMacro(FrameCount, int);
  vtkSetMacro(FrameCount, int);
  ///@}

  ///@{
  /**
   * Get the frame index relative to the 'beginning of the tape'.  This
   * value wraps back to zero if it increases past the FrameBufferSize.
   */
  vtkGetMacro(FrameIndex, int);
  ///@}

  /**
   * Get a time stamp in seconds (resolution of milliseconds) for
   * a video frame.   Time began on Jan 1, 1970.  You can specify
   * a number (negative or positive) to specify the position of the
   * video frame relative to the current frame.
   */
  virtual double GetFrameTimeStamp(int frame);

  /**
   * Get a time stamp in seconds (resolution of milliseconds) for
   * the Output.  Time began on Jan 1, 1970.  This timestamp is only
   * valid after the Output has been Updated.
   */
  double GetFrameTimeStamp() { return this->FrameTimeStamp; }

  ///@{
  /**
   * Initialize the hardware.  This is called automatically
   * on the first Update or Grab.
   */
  virtual void Initialize();
  virtual int GetInitialized() { return this->Initialized; }
  ///@}

  /**
   * Release the video driver.  This method must be called before
   * application exit, or else the application might hang during
   * exit.
   */
  virtual void ReleaseSystemResources();

  /**
   * The internal function which actually does the grab.  You will
   * definitely want to override this if you develop a vtkVideoSource
   * subclass.
   */
  virtual void InternalGrab();

  ///@{
  /**
   * And internal variable which marks the beginning of a Record session.
   * These methods are for internal use only.
   */
  void SetStartTimeStamp(double t) { this->StartTimeStamp = t; }
  double GetStartTimeStamp() { return this->StartTimeStamp; }
  ///@}

protected:
  vtkVideoSource();
  ~vtkVideoSource() override;
  int RequestInformation(vtkInformation*, vtkInformationVector**, vtkInformationVector*) override;

  int Initialized;

  int FrameSize[3];
  int ClipRegion[6];
  int OutputWholeExtent[6];
  double DataSpacing[3];
  double DataOrigin[3];
  int OutputFormat;
  // set according to the OutputFormat
  int NumberOfScalarComponents;
  // The FrameOutputExtent is the WholeExtent for a single output frame.
  // It is initialized in ExecuteInformation.
  int FrameOutputExtent[6];

  // save this information from the output so that we can see if the
  // output scalars have changed
  int LastNumberOfScalarComponents;
  int LastOutputExtent[6];

  int Recording;
  int Playing;
  float FrameRate;
  int FrameCount;

  double StartTimeStamp;
  double FrameTimeStamp;

  vtkTypeBool AutoAdvance;
  int NumberOfOutputFrames;

  float Opacity;

  // true if Execute() must apply a vertical flip to each frame
  int FlipFrames;

  // set if output needs to be cleared to be cleared before being written
  int OutputNeedsInitialization;

  // An example of asynchrony
  vtkMultiThreader* PlayerThreader;
  int PlayerThreadId;

  // A mutex for the frame buffer: must be applied when any of the
  // below data is modified.
  std::mutex FrameBufferMutex;

  // set according to the needs of the hardware:
  // number of bits per framebuffer pixel
  int FrameBufferBitsPerPixel;
  // byte alignment of each row in the framebuffer
  int FrameBufferRowAlignment;
  // FrameBufferExtent is the extent of frame after it has been clipped
  // with ClipRegion.  It is initialized in CheckBuffer().
  int FrameBufferExtent[6];

  int FrameBufferSize;

  // where the current frame is, note this decreases in time
  // increasing values are older frames
  int FrameBufferIndex;

  // number of frames from the beginning sort of,
  // it does wrap, sometimes
  int FrameIndex;

  void** FrameBuffer;
  double* FrameBufferTimeStamps;

  ///@{
  /**
   * These methods can be overridden in subclasses
   */
  virtual void UpdateFrameBuffer();
  virtual void AdvanceFrameBuffer(int n);
  int RequestData(vtkInformation*, vtkInformationVector**, vtkInformationVector*) override;
  // if some component conversion is required, it is done here:
  virtual void UnpackRasterLine(char* outPtr, char* rowPtr, int start, int count);
  ///@}

private:
  vtkVideoSource(const vtkVideoSource&) = delete;
  void operator=(const vtkVideoSource&) = delete;
};

VTK_ABI_NAMESPACE_END
#endif