// SPDX-FileCopyrightText: Copyright (c) Ken Martin, Will Schroeder, Bill Lorensen
// SPDX-License-Identifier: BSD-3-Clause
/**
 * @class   vtkSelectPolyData
 * @brief   select portion of polygonal mesh; generate selection scalars
 *
 * vtkSelectPolyData is a filter that selects polygonal data based on
 * defining a "loop" and indicating the region inside of the loop. The
 * mesh within the loop consists of complete cells (the cells are not
 * cut). Alternatively, this filter can be used to generate scalars.
 * These scalar values, which are a distance measure to the loop, can
 * be used to clip, contour. or extract data (i.e., anything that an
 * implicit function can do).
 *
 * The loop is defined by an array of x-y-z point coordinates.
 * (Coordinates should be in the same coordinate space as the input
 * polygonal data.) The loop can be concave and non-planar, but not
 * self-intersecting. The input to the filter is a polygonal mesh
 * (only surface primitives such as triangle strips and polygons); the
 * output is either a) a portion of the original mesh laying within
 * the selection loop (GenerateSelectionScalarsOff); or b) the same
 * polygonal mesh with the addition of scalar values
 * (GenerateSelectionScalarsOn).
 *
 * The algorithm works as follows. For each point coordinate in the
 * loop, the closest point in the mesh is found. The result is a loop
 * of closest point ids from the mesh. Then, the edges in the mesh
 * connecting the closest points (and laying along the lines forming
 * the loop) are found. Edges between the points can be searched using
 * one of these methods:
 * A) Greedy edge tracking.
 * At the current point, the mesh edge oriented in the
 * direction of and whose end point is closest to the line is
 * chosen. The edge is followed to the new end point, and the
 * procedure is repeated. This process continues until the entire loop
 * has been created. This method is simple and fast but heuristic,
 * and edge search can randomly fail ("Can't follow edge" error)
 * even for simple, flawless meshes when edge search arrives to a point
 * from where there is no edge pointing towards the next loop point.
 * B) Dijkstra shortest path. This method guarantees to find the shortest
 * path between the loop points.
 *
 * By default the greedy edge tracking method is used to preserve
 * backward compatibility, but generally the Dijkstra shortest path
 * method is recommended due to its robustness.
 *
 * To determine what portion of the mesh is inside and outside of the
 * loop, three options are possible. 1) the smallest connected region,
 * 2) the largest connected region, and 3) the connected region
 * closest to a user specified point. (Set the ivar SelectionMode.)
 *
 * Once the loop is computed as above, the GenerateSelectionScalars
 * controls the output of the filter. If on, then scalar values are
 * generated based on distance to the loop lines. Otherwise, the cells
 * laying inside the selection loop are output. By default, the mesh
 * laying within the loop is output; however, if InsideOut is on, then
 * the portion of the mesh laying outside of the loop is output.
 *
 * The filter can be configured to generate the unselected portions of
 * the mesh as output by setting GenerateUnselectedOutput. Use the
 * method GetUnselectedOutput to access this output. (Note: this flag
 * is pertinent only when GenerateSelectionScalars is off.)
 *
 * @warning
 * Make sure that the points you pick are on a connected surface. If
 * not, then the filter will generate an empty or partial result. Also,
 * self-intersecting loops will generate unpredictable results.
 *
 * @warning
 * During processing of the data, non-triangular cells are converted to
 * triangles if GenerateSelectionScalars is off.
 *
 * @sa
 * vtkImplicitSelectionLoop
 */

#ifndef vtkSelectPolyData_h
#define vtkSelectPolyData_h

#include "vtkFiltersModelingModule.h" // For export macro
#include "vtkPolyDataAlgorithm.h"

#define VTK_INSIDE_SMALLEST_REGION 0
#define VTK_INSIDE_LARGEST_REGION 1
#define VTK_INSIDE_CLOSEST_POINT_REGION 2

#define VTK_GREEDY_EDGE_SEARCH 0
#define VTK_DIJKSTRA_EDGE_SEARCH 1

VTK_ABI_NAMESPACE_BEGIN
class vtkCharArray;
class vtkPoints;
class vtkIdList;

class VTKFILTERSMODELING_EXPORT vtkSelectPolyData : public vtkPolyDataAlgorithm
{
public:
  /**
   * Instantiate object with InsideOut turned off, and
   * GenerateSelectionScalars turned off. The unselected output
   * is not generated, and the inside mode is the smallest region.
   */
  static vtkSelectPolyData* New();

  vtkTypeMacro(vtkSelectPolyData, vtkPolyDataAlgorithm);
  void PrintSelf(ostream& os, vtkIndent indent) override;

  ///@{
  /**
   * Set/Get the flag to control behavior of the filter. If
   * GenerateSelectionScalars is on, then the output of the filter
   * is the same as the input, except that scalars are generated.
   * If off, the filter outputs the cells laying inside the loop, and
   * does not generate scalars.
   */
  vtkSetMacro(GenerateSelectionScalars, vtkTypeBool);
  vtkGetMacro(GenerateSelectionScalars, vtkTypeBool);
  vtkBooleanMacro(GenerateSelectionScalars, vtkTypeBool);
  ///@}

  ///@{
  /**
   * Name of the Selection Scalars array. Default is "Selection".
   */
  vtkSetStringMacro(SelectionScalarsArrayName);
  vtkGetStringMacro(SelectionScalarsArrayName);
  ///@}

  ///@{
  /**
   * Set/Get the InsideOut flag. When off, the mesh within the loop is
   * extracted. When on, the mesh outside the loop is extracted.
   */
  vtkSetMacro(InsideOut, vtkTypeBool);
  vtkGetMacro(InsideOut, vtkTypeBool);
  vtkBooleanMacro(InsideOut, vtkTypeBool);
  ///@}

  ///@{
  /**
   * Set the edge search mode. VTK_GREEDY_EDGE_SEARCH is simple and fast,
   * VTK_DIJKSTRA_EDGE_SEARCH is more robust and guaranteed to provide
   * shortest path between loop points.
   * If the algorithm fails with "Can't follow edge" error then switch to
   * Dijkstra method.
   * The default is VTK_GREEDY_EDGE_SEARCH for backward compatibility.
   */
  vtkSetClampMacro(EdgeSearchMode, int, VTK_GREEDY_EDGE_SEARCH, VTK_DIJKSTRA_EDGE_SEARCH);
  vtkGetMacro(EdgeSearchMode, int);
  void SetEdgeSearchModeToGreedy() { this->SetEdgeSearchMode(VTK_GREEDY_EDGE_SEARCH); }
  void SetEdgeSearchModeToDijkstra() { this->SetEdgeSearchMode(VTK_DIJKSTRA_EDGE_SEARCH); }
  const char* GetEdgeSearchModeAsString();
  ///@}

  ///@{
  /**
   * Set/Get the array of point coordinates defining the loop. There must
   * be at least three points used to define a loop.
   */
  virtual void SetLoop(vtkPoints*);
  vtkGetObjectMacro(Loop, vtkPoints);
  ///@}

  ///@{
  /**
   * Set/Get the point used in SelectionModeToClosestPointRegion.
   */
  vtkSetVector3Macro(ClosestPoint, double);
  vtkGetVector3Macro(ClosestPoint, double);
  ///@}

  ///@{
  /**
   * Control how inside/outside of loop is defined.
   */
  vtkSetClampMacro(SelectionMode, int, VTK_INSIDE_SMALLEST_REGION, VTK_INSIDE_CLOSEST_POINT_REGION);
  vtkGetMacro(SelectionMode, int);
  void SetSelectionModeToSmallestRegion() { this->SetSelectionMode(VTK_INSIDE_SMALLEST_REGION); }
  void SetSelectionModeToLargestRegion() { this->SetSelectionMode(VTK_INSIDE_LARGEST_REGION); }
  void SetSelectionModeToClosestPointRegion()
  {
    this->SetSelectionMode(VTK_INSIDE_CLOSEST_POINT_REGION);
  }
  const char* GetSelectionModeAsString();
  ///@}

  ///@{
  /**
   * Control whether a second output is generated. The second output
   * contains the polygonal data that's not been selected.
   */
  vtkSetMacro(GenerateUnselectedOutput, vtkTypeBool);
  vtkGetMacro(GenerateUnselectedOutput, vtkTypeBool);
  vtkBooleanMacro(GenerateUnselectedOutput, vtkTypeBool);
  ///@}

  /**
   * Return output that hasn't been selected (if GenreateUnselectedOutput is
   * enabled).
   */
  vtkPolyData* GetUnselectedOutput();

  /**
   * Return output port that hasn't been selected (if GenreateUnselectedOutput is
   * enabled).
   */
  vtkAlgorithmOutput* GetUnselectedOutputPort();

  /**
   * Return the (mesh) edges of the selection region.
   */
  vtkPolyData* GetSelectionEdges();

  // Overload GetMTime() because we depend on Loop
  vtkMTimeType GetMTime() override;

protected:
  vtkSelectPolyData();
  ~vtkSelectPolyData() override;

  int RequestData(vtkInformation*, vtkInformationVector**, vtkInformationVector*) override;

  // Compute point list that forms a continuous loop overy the mesh,
  void GreedyEdgeSearch(vtkPolyData* mesh, vtkIdList* edgeIds);
  void DijkstraEdgeSearch(vtkPolyData* mesh, vtkIdList* edgeIds);

  // Returns maximum front cell ID
  vtkIdType ComputeTopologicalDistance(
    vtkPolyData* mesh, vtkIdList* edgeIds, vtkIntArray* pointMarks, vtkIntArray* cellMarks);

  // Get closest cell to a position that is not at the boundary
  vtkIdType GetClosestCellId(vtkPolyData* mesh, vtkIntArray* pointMarks);

  // Starting from maxFrontCell, without crossing the boundary, set all cell and point marks to -1.
  void FillMarksInRegion(vtkPolyData* mesh, vtkIdList* edgePointIds, vtkIntArray* pointMarks,
    vtkIntArray* cellMarks, vtkIdType cellIdInSelectedRegion);

  void SetClippedResultToOutput(vtkPointData* originalPointData, vtkCellData* originalCellData,
    vtkPolyData* mesh, vtkIntArray* cellMarks, vtkPolyData* output);

  void SetSelectionScalarsToOutput(vtkPointData* originalPointData, vtkCellData* originalCellData,
    vtkPolyData* mesh, vtkIdList* edgeIds, vtkIntArray* pointMarks, vtkPolyData* output);

  vtkTypeBool GenerateSelectionScalars;
  char* SelectionScalarsArrayName;
  vtkTypeBool InsideOut;
  int EdgeSearchMode;
  vtkPoints* Loop;
  int SelectionMode;
  double ClosestPoint[3];
  vtkTypeBool GenerateUnselectedOutput;

private:
  static void GetPointNeighbors(vtkPolyData* mesh, vtkIdType ptId, vtkIdList* nei);

  // Helper function to check if the edge between pointId1 and pointId2 is present in the
  // edgePointIds (as direct neighbors).
  static bool IsBoundaryEdge(vtkIdType pointId1, vtkIdType pointId2, vtkIdList* edgePointIds);

  vtkSelectPolyData(const vtkSelectPolyData&) = delete;
  void operator=(const vtkSelectPolyData&) = delete;
};

/**
 * Return the method of determining in/out of loop as a string.
 */
inline const char* vtkSelectPolyData::GetSelectionModeAsString()
{
  if (this->SelectionMode == VTK_INSIDE_SMALLEST_REGION)
  {
    return "InsideSmallestRegion";
  }
  else if (this->SelectionMode == VTK_INSIDE_LARGEST_REGION)
  {
    return "InsideLargestRegion";
  }
  else
  {
    return "InsideClosestPointRegion";
  }
}

/**
 * Return the edge search mode as a string.
 */
inline const char* vtkSelectPolyData::GetEdgeSearchModeAsString()
{
  if (this->EdgeSearchMode == VTK_GREEDY_EDGE_SEARCH)
  {
    return "GreedyEdgeSearch";
  }
  else if (this->EdgeSearchMode == VTK_DIJKSTRA_EDGE_SEARCH)
  {
    return "DijkstraEdgeSearch";
  }
  else
  {
    // This should never occur
    return "Invalid";
  }
}

VTK_ABI_NAMESPACE_END
#endif