// SPDX-FileCopyrightText: Copyright (c) Ken Martin, Will Schroeder, Bill Lorensen
// SPDX-License-Identifier: BSD-3-Clause

/**
 * @class   vtkFixedPointRayCastImage
 * @brief   helper class for a ray cast image
 *
 * This is a helper class for storing the ray cast image including the
 * underlying data and the size of the image. This class is not intended
 * to be used directly - just as an internal class in the
 * vtkFixedPointVolumeRayCastMapper so that multiple mappers can share
 * the same image. This class also stored the ZBuffer (if necessary due
 * to intermixed geometry). Perhaps this class could be generalized
 * in the future to be used for other ray cast methods other than the
 * fixed point method.
 *
 * @sa
 * vtkFixedPointVolumeRayCastMapper
 */

#ifndef vtkFixedPointRayCastImage_h
#define vtkFixedPointRayCastImage_h

#include "vtkObject.h"
#include "vtkRenderingVolumeModule.h" // For export macro

VTK_ABI_NAMESPACE_BEGIN
class VTKRENDERINGVOLUME_EXPORT vtkFixedPointRayCastImage : public vtkObject
{
public:
  static vtkFixedPointRayCastImage* New();
  vtkTypeMacro(vtkFixedPointRayCastImage, vtkObject);
  void PrintSelf(ostream& os, vtkIndent indent) override;

  /**
   * Get the internal storage for the image. It is a pointer to
   * unsigned short with four components (RGBA) per pixel. This
   * memory is allocated when the AllocateImage method is called.
   */
  unsigned short* GetImage() { return this->Image; }

  ///@{
  /**
   * Set / Get the ImageViewportSize. This is the size of the
   * whole viewport in pixels.
   */
  vtkSetVector2Macro(ImageViewportSize, int);
  vtkGetVectorMacro(ImageViewportSize, int, 2);
  ///@}

  ///@{
  /**
   * Set / Get the ImageMemorySize. This is the size in pixels
   * of the Image ivar. This will be a power of two in order
   * to ensure that the texture can be rendered by graphics
   * hardware that requires power of two textures.
   */
  vtkSetVector2Macro(ImageMemorySize, int);
  vtkGetVectorMacro(ImageMemorySize, int, 2);
  ///@}

  ///@{
  /**
   * Set / Get the size of the image we are actually using. As
   * long as the memory size is big enough, but not too big,
   * we won't bother deleting and re-allocated, we'll just
   * continue to use the memory size we have. This size will
   * always be equal to or less than the ImageMemorySize.
   */
  vtkSetVector2Macro(ImageInUseSize, int);
  vtkGetVectorMacro(ImageInUseSize, int, 2);
  ///@}

  ///@{
  /**
   * Set / Get the origin of the image. This is the starting
   * pixel within the whole viewport that our Image starts on.
   * That is, we could be generating just a subregion of the
   * whole viewport due to the fact that our volume occupies
   * only a portion of the viewport. The Image pixels will
   * start from this location.
   */
  vtkSetVector2Macro(ImageOrigin, int);
  vtkGetVectorMacro(ImageOrigin, int, 2);
  ///@}

  ///@{
  /**
   * Set / Get the ImageSampleDistance that will be used for
   * rendering. This is a copy of the value stored in the
   * mapper. It is stored here for sharing between all mappers
   * that are participating in the creation of this image.
   */
  vtkSetMacro(ImageSampleDistance, float);
  vtkGetMacro(ImageSampleDistance, float);
  ///@}

  /**
   * Call this method once the ImageMemorySize has been set
   * the allocate the image. If an image already exists,
   * it will be deleted first.
   */
  void AllocateImage();

  /**
   * Clear the image to (0,0,0,0) for each pixel.
   */
  void ClearImage();

  ///@{
  /**
   * Set / Get the size of the ZBuffer in pixels. The zbuffer will
   * be captured for the region of the screen covered by the
   * ImageInUseSize image. However, due to subsampling, the size
   * of the ImageInUseSize image may be smaller than this ZBuffer
   * image which will be captured at screen resolution.
   */
  vtkSetVector2Macro(ZBufferSize, int);
  vtkGetVectorMacro(ZBufferSize, int, 2);
  ///@}

  ///@{
  /**
   * Set / Get the origin of the ZBuffer. This is the distance
   * from the lower left corner of the viewport where the ZBuffer
   * started (multiply the ImageOrigin by the ImageSampleDistance)
   * This is the pixel location on the full resolution viewport
   * where the ZBuffer capture will start. These values are used
   * to convert the (x,y) pixel location within the ImageInUseSize
   * image into a ZBuffer location.
   */
  vtkSetVector2Macro(ZBufferOrigin, int);
  vtkGetVectorMacro(ZBufferOrigin, int, 2);
  ///@}

  ///@{
  /**
   * The UseZBuffer flag indicates whether the ZBuffer is in use.
   * The ZBuffer is captured and used when IntermixIntersectingGeometry
   * is on in the mapper, and when there are props that have been
   * rendered before the current volume.
   */
  vtkSetClampMacro(UseZBuffer, vtkTypeBool, 0, 1);
  vtkGetMacro(UseZBuffer, vtkTypeBool);
  vtkBooleanMacro(UseZBuffer, vtkTypeBool);
  ///@}

  /**
   * Get the ZBuffer value corresponding to location (x,y) where (x,y)
   * are indexing into the ImageInUse image. This must be converted to
   * the zbuffer image coordinates. Nearest neighbor value is returned.
   * If UseZBuffer is off, then 1.0 is always returned.
   */
  float GetZBufferValue(int x, int y);

  /**
   * Get the ZBuffer. The size of the ZBuffer should be specific
   * with SetZBufferSize, and AllocateZBuffer method should be called
   * before getting the ZBuffer.
   */
  float* GetZBuffer() { return this->ZBuffer; }

  // Descipriotn:
  // Allocate the space for the ZBuffer according to the size.
  void AllocateZBuffer();

protected:
  vtkFixedPointRayCastImage();
  ~vtkFixedPointRayCastImage() override;

  // This is how big the image would be if it covered the entire viewport
  int ImageViewportSize[2];

  // This is how big the allocated memory for image is. This may be bigger
  // or smaller than ImageFullSize - it will be bigger if necessary to
  // ensure a power of 2, it will be smaller if the volume only covers a
  // small region of the viewport
  int ImageMemorySize[2];

  // This is the size of subregion in ImageSize image that we are using for
  // the current image. Since ImageSize is a power of 2, there is likely
  // wasted space in it. This number will be used for things such as clearing
  // the image if necessary.
  int ImageInUseSize[2];

  // This is the location in ImageFullSize image where our ImageSize image
  // is located.
  int ImageOrigin[2];

  // This is a copy of the ImageSampleDistance from the mapper - copied here
  // in order to share among all mappers contributing to this image
  float ImageSampleDistance;

  // This is the allocated image
  unsigned short* Image;

  // This is the size of the zbuffer in pixels
  int ZBufferSize[2];

  // This is the size of the memory for the zbuffer - this can be
  // bigger than the size of the zbuffer since we will allocate enough
  // space for the whole viewport to avoid re-allocating over and over
  int ZBufferMemorySize;

  // This is the distance from the lower left corner of the viewport
  // where the ZBuffer starts
  int ZBufferOrigin[2];

  // This is the flag that indicate whether the ZBuffer is in use
  vtkTypeBool UseZBuffer;

  // This is the actual ZBuffer data in floats
  float* ZBuffer;

private:
  vtkFixedPointRayCastImage(const vtkFixedPointRayCastImage&) = delete;
  void operator=(const vtkFixedPointRayCastImage&) = delete;
};

VTK_ABI_NAMESPACE_END
#endif